|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
September 26, 2008, 10:58 AM | #1 |
Junior Member
Join Date: September 25, 2008
Posts: 7
|
Can anyone reccomend a good gunsmith in the DFW area?
I have a Browning BDM that needs some repair work done on the trigger. Can anyone recommend a good gunsmith in the DFW area? Preferably on the Ft. Worth side, but I'm in both Dallas and Ft. Worth regularly.
|
September 26, 2008, 01:41 PM | #2 |
Senior Member
Join Date: January 23, 2006
Location: GA
Posts: 1,860
|
Ken Crawley
I used Ken Crawley for my Commander and I was very pleased. He's in Kemp, so not exactly DFW, but close enough for gummint work.
http://www.crawleycustom.com/ |
September 26, 2008, 05:04 PM | #3 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
You can also check SPS Guns in Carrollton.
Josie Ln and Belt Line Rd. (972) 416-8530 I have yet to find one in Fort Worth. I've been traveling to Ponder lately for pistol work.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
September 26, 2008, 06:31 PM | #4 |
Senior Member
Join Date: July 9, 2004
Posts: 5,172
|
+1 for Ken Crawley. If you ever go to the Mesquite Gun Shows, Ken has a booth set up, so you can drop it off and pick it up at the next show, no drive to Kemp required.
|
September 26, 2008, 10:54 PM | #5 |
Senior Member
Join Date: March 27, 2006
Posts: 1,559
|
The Ft Worth gun show at Will Rogers is this weekend. You might find information or a smith there.
|
Thread Tools | Search this Thread |
|
|