February 27, 2002, 05:13 PM | #1 |
Junior Member
Join Date: February 27, 2002
Posts: 2
|
pedretti
I am trying to find the model and value of a shot gun i own it is a single shot 12 gauge made by pedretti and imported by kassnar imports ser #is 027xxx it has a# 12 on top of the chamber it also has a crest under a star with a wreath around it PSF under another star a bird that looks like a dove and finito under another star all that is on the frame under the chamber when you brake open the barrel.
|
February 27, 2002, 11:02 PM | #2 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
I can't find that maker in the lists, but Kassnar imported some pretty good guns, so it is probably OK for its intended use. The marks are Italian proof marks. PSF is the smokeless powder proof("polvere senza fumo" - powder without smoke) and FINITO means the barrel was delivered for proof in the "finished" condition. Maybe they changed but the old mark was a lion in a shield, not a bird.
Unless it is a special trap gun or the like, my guess is that it would bring about the same as any good single shot, or around $200. Jim |
February 28, 2002, 08:40 PM | #3 |
Senior Member
Join Date: December 6, 1999
Location: Richmond, Virginia USA
Posts: 6,004
|
Speak Italian? This is all I could find other than some short references to good quality.
Francesco Pedretti Via G. Pascoli 154 Gardone Val Trompia 25063 Bs Italy Italy Tel: 39308912339 Fax: 39308912339 And Numrich sells parts for some models. John P.S. - I found this Saddlery and Gun Room site from England that makes moderated(silenced) shotguns and uses a Pedretti as a base, among others. "As with the .410 variety, the base gun is the classic, folding barrel 12 gauge Pedretti, which is almost unbustable and forms a good solid base from which to perform the conversion. If you like you can have your own shotguns converted and the supplier - The Saddlery and Gun Room also provide a moderator for semiautomatic shotguns. which I wilt test in a later issue. If that doesn’t tickle your fancy then a 9”, .410 unit can be fitted to the end of the barrel which works well but adds to a gun’s overall length." I lost the URL, but a Google search on 'Pedretti shotgun' will find it. |
March 1, 2002, 02:38 PM | #4 |
Junior Member
Join Date: February 27, 2002
Posts: 2
|
thanks that helps I was looking for the model so I could buy a new stock as mine was cracked after fireing it I found stocks at gun parts corp. but I don't have a model to buy the correct one.
|
|
|