Ruger 357 Security Six

Natty Bumpo · October 2, 1999, 02:49 AM

I need detailed drawings on dis-assembling and re-assembling a Ruger 357 Security Six (newer model). Do you know of any web sites that would have this information? Any help would be greatly appreciated.

------------------
><>

[This message has been edited by Natty Bumpo (edited October 02, 1999).]

Harley Nolden · October 2, 1999, 07:20 AM

Natty:
Yes. I have the owners manual. If you'd like to have it please provide an email address and I will send it.

When you send your email, make reference to the Ruger Security Six.

You could also try RUGER on the search of your PC
HJN

[This message has been edited by Harley Nolden (edited October 02, 1999).]

_bill_ · October 2, 1999, 08:33 AM

You might also look at:
WWW.GUNWORKS.COM/RUGERSEC.HTM

Joefo · October 3, 1999, 09:11 AM

Send to Ruger, they will send you a new owners manual for this gun free of charge.

Joefo

Harley Nolden · October 3, 1999, 09:39 AM

NATTY:
Kindly advise if you have received the manual by email.

HJN

**4V50 Gary** · October 3, 1999, 12:11 PM

The owner's manual discusses field stripping the gun, but not detailed disassembly. While it's not hard to detail strip the Ruger with a minimal of tools, reassembling a gun is the challenging part for the untrained and I highly recommend getting Jerry Kuhnhausen's book on Rugers. If you get stuck, post a question in the Smithy Forum and either myself or another member will walk you through.

------------------
Vigilantibus et non dormientibus jura subveniunt

October 2, 1999, 02:49 AM	#1
Natty Bumpo Junior Member Join Date: September 30, 1999 Posts: 9	I need detailed drawings on dis-assembling and re-assembling a Ruger 357 Security Six (newer model). Do you know of any web sites that would have this information? Any help would be greatly appreciated. ------------------ ><> [This message has been edited by Natty Bumpo (edited October 02, 1999).]

October 2, 1999, 07:20 AM	#2
Harley Nolden Staff In Memoriam Join Date: January 8, 1999 Location: Brunswick,GA USA Posts: 1,884	Natty: Yes. I have the owners manual. If you'd like to have it please provide an email address and I will send it. When you send your email, make reference to the Ruger Security Six. You could also try RUGER on the search of your PC HJN [This message has been edited by Harley Nolden (edited October 02, 1999).]

October 2, 1999, 08:33 AM	#3
_bill_ Junior Member Join Date: July 12, 1999 Posts: 7	You might also look at: WWW.GUNWORKS.COM/RUGERSEC.HTM

October 3, 1999, 09:11 AM	#4
Joefo Senior Member Join Date: March 22, 1999 Location: NY Posts: 165	Send to Ruger, they will send you a new owners manual for this gun free of charge. Joefo

October 3, 1999, 09:39 AM	#5
Harley Nolden Staff In Memoriam Join Date: January 8, 1999 Location: Brunswick,GA USA Posts: 1,884	NATTY: Kindly advise if you have received the manual by email. HJN

October 3, 1999, 12:11 PM	#6
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 21,832	The owner's manual discusses field stripping the gun, but not detailed disassembly. While it's not hard to detail strip the Ruger with a minimal of tools, reassembling a gun is the challenging part for the untrained and I highly recommend getting Jerry Kuhnhausen's book on Rugers. If you get stuck, post a question in the Smithy Forum and either myself or another member will walk you through. ------------------ Vigilantibus et non dormientibus jura subveniunt