Shooting the completed Track of the Wolf Bucks County Flintlock rifle kit

duelist1954 · April 19, 2014, 04:37 AM

At long last...here is the firing video of the completed Track of the Wolf Bucks County Flintlock rifle kit. I thought you might want to see if it actually works...

https://www.youtube.com/watch?v=rSDZkqA2rc8

Smokin'Joe · April 19, 2014, 08:20 AM

Good job Mountain Man Mike!

Doc Hoy · April 19, 2014, 03:38 PM

Yes, I do

Series70 · April 19, 2014, 05:35 PM

Thanks for putting this up, Mike. Most enjoyable.

Beagle333 · April 19, 2014, 06:02 PM

Great video! You sure messed up a lot of meat on that water jug though!

**4V50 Gary** · April 20, 2014, 09:24 AM

Enjoyed the vid. Thank you.

I assembled my first brass patchbox in over ten years. I milled a jig to form the hinge. Boy, I sure forgot a lot and so far it looks like I made it. I was filing it down to remove the hammer marks and may begin sand it soon. Then I have to cut the finial (which I made too short) after which I can inlet my stock for it.

Captchee · April 20, 2014, 06:17 PM

Like it alot mike . good job on the first part about the comments , 2 thumbs up sire

April 19, 2014, 04:37 AM	#1
duelist1954 Senior Member Join Date: March 14, 2011 Location: Central Pennsylvania Posts: 567	Shooting the completed Track of the Wolf Bucks County Flintlock rifle kit At long last...here is the firing video of the completed Track of the Wolf Bucks County Flintlock rifle kit. I thought you might want to see if it actually works... https://www.youtube.com/watch?v=rSDZkqA2rc8

April 19, 2014, 03:38 PM	#3
Doc Hoy Senior Member Join Date: October 24, 2008 Location: Naples, Fl Posts: 5,440	I love it Yes, I do __________________ Seek truth. Relax. Take a breath.

April 19, 2014, 05:35 PM	#4
Series70 Member Join Date: January 29, 2010 Posts: 78	This has been a great series Thanks for putting this up, Mike. Most enjoyable.

April 19, 2014, 06:02 PM	#5
Beagle333 Senior Member Join Date: January 7, 2012 Location: Auburn, AL. Posts: 2,332	Great video! You sure messed up a lot of meat on that water jug though! __________________ . . . Have a Colt and a smile.

April 20, 2014, 09:24 AM	#6
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 21,838	Enjoyed the vid. Thank you. I assembled my first brass patchbox in over ten years. I milled a jig to form the hinge. Boy, I sure forgot a lot and so far it looks like I made it. I was filing it down to remove the hammer marks and may begin sand it soon. Then I have to cut the finial (which I made too short) after which I can inlet my stock for it. __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

April 19, 2014, 08:20 AM	#2
Smokin'Joe Senior Member Join Date: December 27, 2010 Posts: 211	Good job Mountain Man Mike!

April 20, 2014, 06:17 PM	#7
Captchee Senior Member Join Date: April 2, 2013 Posts: 439	Like it alot mike . good job on the first part about the comments , 2 thumbs up sire