September 6, 2008, 06:10 PM | #1 |
Member
Join Date: February 17, 2008
Location: Southern California
Posts: 89
|
High Standard 22's
Are they any good? Quality, customer service, parts and accessories, accuracy etc.
Thanks in advance. |
September 6, 2008, 06:39 PM | #2 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
H-s .22
High Standard pistols. When discussing H-S pistols, it helps to understand that you are referring to more than one company, producing pistols of different quality over nearly six decades.
The original High Standard manufacturing co. began producing pistols in 1951. Most of their pistols were produced at the factory in Hamden, Conn. Those pistols were and remain the finest American made target pistols ever produced. Those pistols are available fairly often at places like Gunbroker.com. Look on the frame to see that the gun was made in Hamden, Conn. After H-Ss fortunes began to fall, which had nothing to do with the quality of their guns, they moved to Hartford, Conn. Many of the guns produced there were inferior to the Hamden pistols. So, you can see that there is no customer service for the originals. They are extremely accurate, perhaps the best factory trigger ever, easy to clean, and given care, extremely reliable. I have a Victor model that has been my Bullseye match .22 for many years. I don't know how many CASES of ammo I have put through it but it has only rarely ftf. You will hear that they are finicky about magazines. True enough. Factory magazines work the best. Since the original company's failure in the 1970's, the tooling for the guns and the name of the company have changed hands three times that I know of. I do not know about these more recent guns. Pete |
September 6, 2008, 06:55 PM | #3 |
Senior Member
Join Date: March 6, 2006
Location: Central Florida
Posts: 3,324
|
Pete nailed it. The later pistols (especially the Texas built versions) are iffy at best. But the Hamden pistols are.... a work of art when firing if they're in good condition. They're worth the effort.
__________________
Proud NRA Benefactor Member |
September 8, 2008, 09:23 AM | #4 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
Like Pete said, the older HSs are great. They made several target pistols. We had several in the AKNG MTU. I tired to stay away from the Victor. Some work some dont. You can tell until you get one. If you get one that works, there isnt better pistol out there, but I've seen some that didn't. I bought my Victor in the 70s, It was one of those that worked (and still does). Two of my pistol team members had Victors that wern't that impressive, Accurate as heck but wasnt that reliable. They were constantly shooting alibi strings. I have never had to shoot an alibi string because of my victor.
Anyway, I'll go with what Pete said, if you can pick up an older one, go for it. If I had to buy a NEW pistol, I'd go to the Smith 41. But I'll never let my Victor go.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
September 8, 2008, 09:51 AM | #5 | |
Junior member
Join Date: April 8, 2007
Location: Virginia
Posts: 3,769
|
Quote:
http://www.bellum.nu/armoury/OSSHiStandardHDM.html |
|
September 8, 2008, 10:37 AM | #6 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
H-S
"Weren't there High Standard pistols around during WW2?"
Y'know, I thought that but then I looked into Tom Dance's book and the production runs, for the target pistols at least, begin in 1951. As it turns out, you are correct. I found this post on another forum: a short history: " High Standard Pistol Basics Without writing an entire book on the subject, I thought this article might help some owners or even potential owners learn some basics about High Standard pistols. The first High Standard pistol was actually a borrowed design from the Colt Woodsman. The creator of the first High Standard was a former Colt employee by the name of Carl Gustave Swebilius in 1929. After the firms collapse in 1984, Al Arenstein is credited for saving the company’s name with his reintroduction of the firm in 1994. Since there are literally hundreds of major and subtle changes throughout the history of this firm, plus the existence of revolvers, shotguns, and rifles, I felt it necessary to stick to just semi auto pistols with this post. There are many books on the subject of High Standards. I would strongly suggest our readers become familiar some of these: ‘High Standard, A Collectors Guide,’ By Tom Dance, 1991, Andrew Mowbray Publishers, Lincoln, R.I.. ‘High Standard Pistols and Revolvers, 1951-1954’ By James Spacek, 1998, Copyright, James V. Spacek Jr., Cheshire, Conn.. www.histandardinfo./ John Stimson Jr. In the past I've been helping you all from memory created from years of collecting and shooting. Its now time I write it down before I forget it. Here are some basic facts that may save you from having to post long threads to find out details about your guns. these dates are close. dont hold me ransom on its perfection. im going by memory. if collectors are reading this, dont have a cow. how about helping us make it perfect by adding your input and stop calling me an annoying novice. im not a hair splitter. this thread is an act of love for the readers and is meant to be a tribute to a fine firearm. the nomenclature may not be book perfect, but if the reader understands it, it did its job: Factories: 1929 - 1930……..Hartford Arms, Hartford, Conn 1931 – 1957……..High Standard New Haven 1957 – 1977……..High Standard Hamden 1977 – 1984……..High Standard East Hartford 1990 - 1995……..(Clones Ft Worth Arms, Mitchell, Stoeger 1994 – Present.….High Standard Houston Progression of Frame Designs: 1929 - Small frame slant 1937 - Large frame slant 1947 - Small frame slant takedown 1947 - Large frame slant takedown 1965 - Military frame takedown Order Of Series Introductions: 1929 - Hartford Arms 1932 - Alphabetical: (SMALL FRAME) B, C, S 1937 - (LARGE FRAME) A, D, E, Hammers 1947 - G Series: GB, GD, GE, GO, .380 1950 - SUPERMATIC: 100 1954 - SUPERMATIC: 101 1957 - SUPERMATIC: 102, 1960 - 103 1963 - 104 1965 - MILITARY: 106 1967 - 107 1969 - Numbered 1975 - G Prefix 1977 - ML 1981 - SH 1984 – V Suffix, Out Of Business 1994 – HOUSTON MILITARY 1994 - AF 1994 - 105 1995 - Numbered" In general, the Hamden guns from 1957-1977 are the most prized target guns. Pete |
September 8, 2008, 01:31 PM | #7 |
Senior Member
Join Date: December 1, 2005
Posts: 249
|
In the 1966 Gun Digest, Gil Hebard reported machine rest groups as tight as 0.67" (10 shots) with Remington .22 LR Pistol Match from a 7 1/4" fluted barrel High Standard Supermatic Trophy...at 50 YARDS. 10-group averages of ten shots each ran from 0.99" to 1.66".
Source: 1966 Gun Digest, P.56 |
September 8, 2008, 01:46 PM | #8 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
Not hand picked for gunzine, either. I have an elderly Citation Military that will shoot like that... from a Ransom Rest. Which sure means that I have no excuse.
|
September 8, 2008, 02:34 PM | #9 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
H-S
OK. Something that I should know. How are the newer products? I see that Champions Choice sells them and Neal Johnson; they don't usually sell junk?
Pete My Victor...1973. |
September 10, 2008, 03:01 PM | #10 |
Senior Member
Join Date: June 7, 2007
Location: The Lone Star State
Posts: 255
|
When I started shooting Bullseye again in 2003, I sent my HS Victor (bought originally in 1976) to the company in Houston to put new springs in it. They found that the frame had cracked and offered to replace it.
They used the parts from my old frame and put the pistol back together. While I can't vouch for a completely new gun, the one they repaired works just fine and the frame is top-notch; good fit and finish. At the time, they would work on older models, like the slant grip pistols, but I'm not sure about now.
__________________
Navy Vet, SWIFT Boat OIC, Distinguished Pistol Shot #1399 USS JOHN S. MCCAIN (DDG-36) |
September 11, 2008, 02:59 AM | #11 |
Senior Member
Join Date: November 22, 2007
Location: Dollard des Ormeaux ,Qc,Canada
Posts: 128
|
HI STANDARD Model H-D MILITARY (New Haven,Conn. )
|
September 11, 2008, 03:09 AM | #12 |
Senior Member
Join Date: November 22, 2007
Location: Dollard des Ormeaux ,Qc,Canada
Posts: 128
|
Very important
|
October 11, 2008, 01:33 PM | #13 |
Junior Member
Join Date: June 27, 2008
Posts: 3
|
High Standard 22
Used one in Laos and other places in 1963. Very effective quiet weapon particularly with shorts. Never had a malfunction.
|
June 9, 2017, 03:27 PM | #14 |
Senior Member
Join Date: January 31, 2017
Location: Va., Ct., Mo..
Posts: 878
|
i wrote that article about 15 years ago that appeared in mausercentral.com.
if i can help in any way, let me know guys. btw....i tried to access mausercentral and it appears the website went belly up? gee i hope i didnt lose that article. can anyone else get on mausercentral these days?
__________________
Retired Military Aviation Former Member Navy Shooting Team Distinguished Pistol Shot,NRA Shotgun/Pistol Instructor NSSA All American, Skeet/Trap Range Owner |
|
|