April 7, 2012, 11:06 AM | #1 |
Member
Join Date: September 21, 2004
Posts: 21
|
reloading needs
How much ammo do I need.
I have. 3000 9mm cases 1200 45 acp cases.. would want 2000. 1200 223 cases.. would like to have 4000. 200 30/06 and would to have 500. 150 22/250 and would like to have 500. I make my own bullets for the nine and 45. So how much power, primers and bullets do I need for each? Thinking along the line of how much other here would want to keep around. Last edited by hsccox; April 7, 2012 at 12:12 PM. |
April 7, 2012, 11:55 AM | #2 |
Senior Member
Join Date: September 21, 2010
Location: az
Posts: 1,332
|
Well for each case you'll need a primer, powder charge and bullet... do you need a calculator?
__________________
"When there’s lead in the air, there’s hope in the heart”- Hunter’s Proverb "Feed me, or feed me to something. I just want to be part of the food chain." -Al Bundy |
April 7, 2012, 12:19 PM | #3 |
Senior Member
Join Date: February 19, 2012
Location: A wheat field in Kansas
Posts: 141
|
I see you are short of 10mm
__________________
"A free people ought not only to be armed and disciplined but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." --George Washington |
April 7, 2012, 12:22 PM | #4 | |
Senior Member
Join Date: September 21, 2010
Location: az
Posts: 1,332
|
Quote:
__________________
"When there’s lead in the air, there’s hope in the heart”- Hunter’s Proverb "Feed me, or feed me to something. I just want to be part of the food chain." -Al Bundy |
|
April 7, 2012, 01:00 PM | #5 |
Senior Member
Join Date: April 12, 2010
Location: Lake Martin, AL
Posts: 3,311
|
As the other responder mentioned, you need to dig out your trusty ole calculator since the amount of powder is dependent upon the type and the load recipe you use. Then there is the question of how much you want on hand for replinishing what you are shooting.
This is a tremendous amount of reloading unless you have a very capable progressive press. If you are using a single stage or turret press, you are in for hours and hours of fun. I will caution anyone with a large reloading task to be careful. After hours of it, you are subject to becoming lax in your attention to details and also may not do as much double checking loads as you should. It can be similar to what happens to you while driving long distance. Take breaks and stay alert. |
April 7, 2012, 01:17 PM | #6 |
Senior Member
Join Date: November 5, 2010
Location: North Carolina
Posts: 358
|
relative to what?
The first question should be what is this for?
Is it a 6 month supply or 1 year supply to wait out the electrion year? Or is it in case of a catastrophe? If it is the first, then figure out how much you shoot/month to get your answer. IF it is to wait some catastrophe then, I wouldn't be trying to load up for every gun. I would be more concentrated on what is needed. For me it would be .22s (cheap and small spaces) 45s for a pistol, 223s and 12 gauge loads. That would cover most any need. If one fails, others you have will surfice.
__________________
L2R |
April 7, 2012, 05:09 PM | #7 | |
Senior Member
Join Date: December 31, 1999
Location: Middle Georgia, USA
Posts: 13,198
|
Quote:
If you hand load your own ammo, then how is it you don't know how much power (powder?), primers and bullets you need? For each cartridge you need one bullet, one case, one primer and a specific amount of powder, depending on which one you are using and your charge for that bullet and other variables that I'm sure you know about since you make your own bullets for the nine and 45. |
|
April 7, 2012, 06:31 PM | #8 |
Senior Member
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
|
17,000
|
April 8, 2012, 12:11 AM | #9 |
Senior Member
Join Date: August 31, 2009
Location: New Mexico
Posts: 1,033
|
no, I thought better of it.
|
April 8, 2012, 07:46 AM | #10 |
Senior Member
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,592
|
Depends on how much you shoot.
One week-end last summer we went through 500 .45 Colt rounds and 1,000 .38 special rounds. This coming week-end I expect to shoot about 100 each of .30-06 Spring., .222 Rem, 30-30 Win. and maybe some out of the old .45 Colt rifle. Pistol rounds will vary, depending how many kids show up and how often we cycle them through the firing line. So, the real question you should be asking yourself, how many do I want to make? They are not going to go bad once you make them up.
__________________
Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen. |
April 8, 2012, 08:16 AM | #11 |
Senior Member
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
|
"Prepper"
|
April 8, 2012, 08:58 AM | #12 |
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
You'll need more 44 Mag brass, perhaps even some 45 Colt.
|
April 8, 2012, 09:57 AM | #13 |
Senior Member
Join Date: January 3, 2008
Location: Central Oregon
Posts: 348
|
7,000 grs. of powder per lb. divided by however many grs. you wish to use per round and only 1 primer per empty case . This formula only works if unlike the rest of us you only pick 1 powder and 1 primer
|
April 9, 2012, 11:09 AM | #14 |
Junior Member
Join Date: March 26, 2012
Posts: 9
|
reloading needs
20 lbs of power
10k of assorted primers At least 1k of brass for everthing you shoot At least 1k of bullets for everthing you shoot PLUS everthing you have already loaded up. Local Laws may prohibit the amount you have may stow in a resident. Last edited by pic1083; April 9, 2012 at 11:19 AM. |
|
|