Old S&W Smith and Wesson

old32 · January 23, 2013, 08:48 PM

I have an 32 caliber S&W revolver, top break, double action second model, 3 1/2 inch barrel. It was probably made between 1880 and 1882. Serial number is 17833.

The gun is missing the cylinder. Does any one have one or know where I can get one.

Thanks

James K · January 23, 2013, 09:38 PM

Try www.gunpartscorp.com for a lookup, but I strongly suggest mailing them a request with the full description of the gun and the serial number.

Also if the cylinder is missing, you will need the other parts like the extractor, extractor post, and extractor spring. Cost, with shipping and handling will run around $75 if they have the parts.

Jim

old32 · January 29, 2013, 02:06 PM

I sent them an email over a week ago and never received a response.

Thanks for the information.

**Mike Irwin** · January 29, 2013, 02:15 PM

I have occasionally seen them for sale in parts bins at shows.

January 23, 2013, 08:48 PM	#1
old32 Junior Member Join Date: January 21, 2013 Posts: 2	Old S&W Smith and Wesson I have an 32 caliber S&W revolver, top break, double action second model, 3 1/2 inch barrel. It was probably made between 1880 and 1882. Serial number is 17833. The gun is missing the cylinder. Does any one have one or know where I can get one. Thanks

January 29, 2013, 02:06 PM	#3
old32 Junior Member Join Date: January 21, 2013 Posts: 2	32 S&W I sent them an email over a week ago and never received a response. Thanks for the information.

January 29, 2013, 02:15 PM	#4
Mike Irwin Staff Join Date: April 13, 2000 Location: Northern Virginia Posts: 41,388	I have occasionally seen them for sale in parts bins at shows. __________________ "The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower.

January 23, 2013, 09:38 PM	#2
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	Try www.gunpartscorp.com for a lookup, but I strongly suggest mailing them a request with the full description of the gun and the serial number. Also if the cylinder is missing, you will need the other parts like the extractor, extractor post, and extractor spring. Cost, with shipping and handling will run around $75 if they have the parts. Jim