|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 4, 2011, 01:05 AM | #1 |
Senior Member
Join Date: July 21, 2010
Posts: 240
|
WIN MOD 70 Magazine Spring
I've looked & looked for a place that sells a Winchester Model 70 30.06 magazine spring & I can't find a single place. I didn't know where else to turn to except here. Below I will describe my problem & see if the magazine spring is the actual problem, any help would be greatly appreciated.
I have Winchester Model 70 Westener in 30.06. The problem is that last round in the magazine just pops up & out of the magazine well...off of the follower. It comes off as I put forward pressure on the rim of the round as soon as I begin pushing the bolt forward. A person on this site said that it could be either the magazine spring or the feed rails. See just as long as there is a round ungerneath the round that is currently being chambered all is good, but on the last round it just pops out & on top of the magazine well & can't be chambered. Thanks in advance for all who helps me out. |
January 4, 2011, 03:49 AM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
January 4, 2011, 09:18 AM | #3 |
Senior Member
Join Date: July 21, 2010
Posts: 240
|
Thanks brother
|
|
|