|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 6, 2001, 11:25 AM | #1 |
Member
Join Date: April 19, 2001
Posts: 27
|
Casings are drilling me in the forehead or between the eyes and I'm wondering how hard it is to fix this. Thanks
BB |
June 6, 2001, 04:44 PM | #2 |
Member
Join Date: September 7, 2000
Posts: 81
|
Any time that I have had that problem, a longer ejector has solved it.
|
June 7, 2001, 07:37 AM | #3 |
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
|
BB, you can increase the tension on the extractor. That will usually cure it. George
|
June 7, 2001, 01:58 PM | #4 |
Member
Join Date: April 19, 2001
Posts: 27
|
How do you increase the tension?
BB |
June 8, 2001, 06:36 AM | #5 |
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
|
BB, go to http://www.m1911.org/technic.htm and you'll find a very good article by Bill Wilson describing how it's done. George
|
June 8, 2001, 06:30 PM | #6 |
Member
Join Date: April 19, 2001
Posts: 27
|
Thanks George, will read this article.
BB |
|
|