April 28, 2012, 03:28 PM | #1 |
Senior Member
Join Date: December 6, 2009
Location: Hudson Valley,NY
Posts: 231
|
Need a good smith
The loading lever retaining clip fell off of my Pietta 1860 again. Had my local smith tac weld it back on but I think welding is not his forte. Need a good smith with fairly rapid turn around time. Live in the Northeast but not essential.
|
April 28, 2012, 03:38 PM | #2 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Howard....
PM sent.
__________________
Seek truth. Relax. Take a breath. |
April 28, 2012, 06:27 PM | #3 |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
Take a center punch and put a couple dings in the bottom of the latch and on the barrel in the dovetail. Clean the dovetail and latch real good with degreaser,ut a couple drops of super glue in the dovetail then tap the latch back in. Wipe off the excess super glue. Red Locktite works also.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce |
April 28, 2012, 09:31 PM | #4 |
Senior Member
Join Date: May 27, 2006
Location: Ozarks
Posts: 1,840
|
I doesn't need t be welded, it needs to be silver soldered in place. It will then never move.
__________________
"A Liberal is someone who doesn't care what you do, as long as it's mandatory". - Charles Krauthammer |
|
|