obselete caliber

timgd · July 14, 2008, 09:09 PM

looking for information/ loads for the.32wsl .I bought a Win. m1905 knowing I would have to reload to shoot it.I have not done any reloading but I have most of the equip.

VaFisher · July 15, 2008, 06:35 AM

http://stevespages.com/page8a.htm

Scorch · July 15, 2008, 11:00 AM

You can make brass from 30 Carbine brass, since it was developed from 32 WSL. You can load with 2400, 4227, or Blue Dot. Bullets may be your single biggest challenge, as you will need gas checked bullets in .321" diameter.

blu97 · July 15, 2008, 01:23 PM

Good score on the 05 in 32 hard to find.

BurkGlocker · July 15, 2008, 02:51 PM

Its like when I was looking for ammo for my old 1903 Winchester .22 Auto, good luck finding ammo guy. I finally found some at Old Western Scrounger, but they had to make the ammo at the time. Wished I still had that 1903...

Edit:
Checked OWS and they didnt have them, apoligize about that. All they had was 35 WSL... But did find a site for Gad Custom Reloaded Cartridge but it was $25 for a box of 20. http://www.gadcustomcartridges.com/

timgd · July 15, 2008, 10:17 PM

Thanks for your replys
I managed to find 35 rounds from 2 sources mostly marked wra also 1 from peters and 3 from remington.I will keep the old stuff and buy new bertram brass for reloading. Any one have a set of unneeded dies. Still listed at rcbs but very exspensive. If someone has a set of dies I have 2000 rounds of new win 38 spl nickel plated brass. I don' own a 38 spl.

Johnny Guest · July 16, 2008, 01:15 AM

Post your request in the Buy Sell Trade: Holsters, Gear, and Accessories forum as well. Something like, "WTB/WTT .32 WSL Brass."

That's normally the proper place if one is looking to work a trade. In this case, I'll leave this up in H&R forum, as your need is pretty specialized.

Good luck.
Johnny

HOGGHEAD · July 16, 2008, 02:36 AM

Pictures, Pictures of the rifle please. Did I mention pictures?? Tom.

timgd · July 16, 2008, 07:07 PM

I have some pictures I will post them when I figure out how.

July 14, 2008, 09:09 PM	#1
timgd Member Join Date: July 14, 2008 Location: SF bay area Posts: 85	obselete caliber looking for information/ loads for the.32wsl .I bought a Win. m1905 knowing I would have to reload to shoot it.I have not done any reloading but I have most of the equip.

July 15, 2008, 11:00 AM	#3
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	You can make brass from 30 Carbine brass, since it was developed from 32 WSL. You can load with 2400, 4227, or Blue Dot. Bullets may be your single biggest challenge, as you will need gas checked bullets in .321" diameter. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

July 15, 2008, 01:23 PM	#4
blu97 Member Join Date: June 12, 2008 Location: California Posts: 81	32 wsl Good score on the 05 in 32 hard to find.

July 15, 2008, 02:51 PM	#5
BurkGlocker Senior Member Join Date: May 18, 2008 Location: Sheppard AFB, TX Posts: 568	Its like when I was looking for ammo for my old 1903 Winchester .22 Auto, good luck finding ammo guy. I finally found some at Old Western Scrounger, but they had to make the ammo at the time. Wished I still had that 1903... Edit: Checked OWS and they didnt have them, apoligize about that. All they had was 35 WSL... But did find a site for Gad Custom Reloaded Cartridge but it was $25 for a box of 20. http://www.gadcustomcartridges.com/ Last edited by BurkGlocker; July 15, 2008 at 02:58 PM. Reason: I'm an idiot...

July 15, 2008, 10:17 PM	#6
timgd Member Join Date: July 14, 2008 Location: SF bay area Posts: 85	obselete caliber Thanks for your replys I managed to find 35 rounds from 2 sources mostly marked wra also 1 from peters and 3 from remington.I will keep the old stuff and buy new bertram brass for reloading. Any one have a set of unneeded dies. Still listed at rcbs but very exspensive. If someone has a set of dies I have 2000 rounds of new win 38 spl nickel plated brass. I don' own a 38 spl.

July 15, 2008, 06:35 AM	#2
VaFisher Senior Member Join Date: January 24, 2006 Posts: 596	http://stevespages.com/page8a.htm

July 16, 2008, 01:15 AM	#7
Johnny Guest Moderator in Memoriam Join Date: August 28, 1999 Location: North Texas Posts: 4,123	Another suggestion - - Post your request in the Buy Sell Trade: Holsters, Gear, and Accessories forum as well. Something like, "WTB/WTT .32 WSL Brass." That's normally the proper place if one is looking to work a trade. In this case, I'll leave this up in H&R forum, as your need is pretty specialized. Good luck. Johnny

July 16, 2008, 02:36 AM	#8
HOGGHEAD Senior Member Join Date: April 2, 2008 Location: Rivesville, WV Posts: 637	Pictures Pictures, Pictures of the rifle please. Did I mention pictures?? Tom.

July 16, 2008, 07:07 PM	#9
timgd Member Join Date: July 14, 2008 Location: SF bay area Posts: 85	pictures I have some pictures I will post them when I figure out how.