Case Gauges - 357 SIG?

jtduncan · January 27, 2002, 05:38 AM

I've been to Midway and Dillon and it seems as if no one makes a quik - check or all dimensions drop in case gauge for 357 sig.

I see that some bottlenecked rounds like .223 and 30-06 have gauges.

Tired of breaking down my Glock 32 to get the barrel out to use it for gauge.

Are they out there?

sricciardelli · January 28, 2002, 05:02 PM

You could just buy a "junker" parts gun in that caliber and use it's barrel as your gauge...or take your barrel to the local machine shop and have them CRC a gauge from your barrel dimensions...

Contender · February 1, 2002, 10:59 PM

JT,

Go to Bar-Sto's website and e-mail or call and ask them if they still sell chamber cut-offs of their barrels.

Years ago they sold them for chamber check purposes just like you need.

Tell them what gun/cartridge you have.

http://www.barsto.com/

Regards

jtduncan · February 2, 2002, 06:28 PM

Thanks.

I'll call them.

kidcoltoutlaw · February 15, 2002, 09:13 AM

hornady will make you one

January 27, 2002, 05:38 AM	#1
jtduncan Senior Member Join Date: December 5, 1999 Location: Seattle, Washington, USA Posts: 1,686	Case Gauges - 357 SIG? I've been to Midway and Dillon and it seems as if no one makes a quik - check or all dimensions drop in case gauge for 357 sig. I see that some bottlenecked rounds like .223 and 30-06 have gauges. Tired of breaking down my Glock 32 to get the barrel out to use it for gauge. Are they out there? __________________ The Seattle SharpShooter Reloaded .223 Rem, 9mm, 40SW, 357 SIG, 10mm, 44 Mag, 45 ACP Today?

February 2, 2002, 06:28 PM	#4
jtduncan Senior Member Join Date: December 5, 1999 Location: Seattle, Washington, USA Posts: 1,686	Thanks. I'll call them. __________________ The Seattle SharpShooter Reloaded .223 Rem, 9mm, 40SW, 357 SIG, 10mm, 44 Mag, 45 ACP Today?

February 15, 2002, 09:13 AM	#5
kidcoltoutlaw Senior Member Join Date: April 13, 2000 Location: bluefield Posts: 735	hornady will make you one __________________ It's not just a gun it's the symbol of freedom

January 28, 2002, 05:02 PM	#2
sricciardelli Senior Member Join Date: August 13, 2001 Location: Montana Posts: 489	You could just buy a "junker" parts gun in that caliber and use it's barrel as your gauge...or take your barrel to the local machine shop and have them CRC a gauge from your barrel dimensions...

February 1, 2002, 10:59 PM	#3
Contender Senior Member Join Date: December 10, 1998 Location: NY Posts: 680	JT, Go to Bar-Sto's website and e-mail or call and ask them if they still sell chamber cut-offs of their barrels. Years ago they sold them for chamber check purposes just like you need. Tell them what gun/cartridge you have. http://www.barsto.com/ Regards