|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 19, 2006, 04:05 PM | #1 |
Senior Member
Join Date: June 17, 2006
Posts: 355
|
whats your favorite 9mm target load???
its my favorite pistol round. I was wondering whats your target load
bullet,powder,case?? |
July 19, 2006, 06:15 PM | #2 |
Senior Member
Join Date: March 11, 2006
Location: IL
Posts: 537
|
Win 115hp, 5.0 w231 or hp38, wsp primer. X1 fired mixed cases, 1175fps. I tipicaly buy nickel cases so I don't have to deal with mil cases and primer crimps much. Also case capasity is much more consistant without the mil cases mixed in. I have loaded a lot of wcc cases sorted out by them selves. I am not concerend about pressuer so much as consistancy. I bell and crimp very little. I run the size die one full turn off the plate and finish up with a Lee fcd. If any one can beat this load for the money and simplicity I wana try it.
Chalange on
__________________
Will work for brass. I apologise in advance for spelling errors. |
July 20, 2006, 09:37 AM | #3 |
Senior Member
Join Date: April 28, 2006
Location: South dakota
Posts: 674
|
6.1 gr blue dot behind a 122 gr lead RN bullet with a magnum primer.
SW |
July 20, 2006, 10:54 AM | #4 |
Senior Member
Join Date: June 21, 2002
Posts: 2,019
|
Zero 147 JHP in Win cases, WSP primer and plain Clays powder. Nothing shoots softer, and has been very accurate for me in a couple guns. Clays is all I load in target 9mm anymore, soft and clean while still being very accurate.
|
July 20, 2006, 11:23 AM | #5 |
Junior member
Join Date: September 25, 2005
Posts: 1,372
|
147gr XTP on top of 4.2 grains of WSF or 3.5 grains of Universal Clays. What gun are you trying to feed?
|
July 20, 2006, 10:22 PM | #6 |
Senior Member
Join Date: December 21, 2004
Posts: 529
|
winchester 115gr FMJ hollow base(not hollow point) with 5.7gr WSF 1.150" OAL
shot well at 50 yards in Steyr M9
__________________
Divided and conquered, Gripped by fear Wishful thinking that it can't happen here It's well underways but nobody knows A repeat of history, That's how it goes |
July 20, 2006, 11:36 PM | #7 |
Senior Member
Join Date: January 7, 2000
Location: Idaho
Posts: 6,073
|
Cheap Ranier plated bullet (115gr.) on top of 5.6gr. Unique. CCI primer.
__________________
I am Pro-Rights (on gun issues). |
July 21, 2006, 09:30 AM | #8 |
Senior Member
Join Date: June 17, 2006
Posts: 355
|
target load
the pistol that I am loading for is a glock 17L.
|
July 21, 2006, 10:04 AM | #9 |
Junior member
Join Date: September 25, 2005
Posts: 1,372
|
That gun can actually do 1" @ 25 with good ammo. I've been told that 6 grains of Power Pistol behind a 124gr. XTP will shoot 1" at 50 from a match gun, so that one is worth trying too.
|
July 22, 2006, 02:08 PM | #10 |
Member
Join Date: October 26, 2002
Location: Denver, CO
Posts: 84
|
115gr FMJ Montana Gold + 5.3gr Winchester Super Field = 1,140 fps and accurate.
124gr FMJ + 4.9gr WSF = 1,070 fps 124gr FMJ + 4.6gr Universal = 1,100 fps. 124gr FMJ + 4.1 N-320 = 1,050 = very accurate and clean. |
|
|