May 1, 2012, 01:25 AM | #1 |
Member
Join Date: March 9, 2012
Location: OreGUN!
Posts: 66
|
Colt SAA Picture thread!
The SAA is my favorite gun so why not make it a picture thread!
lets see your original, or even repro 45 Heres what i hope will soon be mine |
May 1, 2012, 12:46 PM | #2 |
Junior member
Join Date: January 1, 2007
Location: Idaho
Posts: 2,282
|
|
May 1, 2012, 01:35 PM | #3 |
Member
Join Date: December 10, 2009
Posts: 90
|
my pair of shooters
My pair of Colt SAA shooters. 5 1/2" full Royal Blue from the Custom Shop;
4 3/4" blue and case. Both have full action jobs both are .45 Colt and they both have genuine Sambar Stag grips. Jeff |
May 1, 2012, 01:59 PM | #4 |
Senior Member
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,909
|
Does this count? It's a 1957 vintage Frontier Scout - .22 and .22 mag.
Here's a Cimarron Model P and a Colt Lightning (hey, the rifle is single action, right?)
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae |
May 1, 2012, 02:16 PM | #5 |
Member
Join Date: March 9, 2012
Location: OreGUN!
Posts: 66
|
Those count for sure!
|
May 1, 2012, 03:34 PM | #6 |
Senior Member
Join Date: February 25, 2010
Location: Coyote Creak, SW Texas
Posts: 597
|
Here is my Cimarron Artillery
__________________
Twobit, Strive to live up to the opinion that your dog has of you. |
May 1, 2012, 03:51 PM | #7 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
Here's mine. 45 Colt of course
|
May 1, 2012, 07:20 PM | #8 |
Member
Join Date: March 9, 2012
Location: OreGUN!
Posts: 66
|
saa pictures
All these old saa's make me feel like im in heaven
keep the pictures coming! |
May 1, 2012, 08:10 PM | #9 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
I have some slightly fuzzy photos of several Colt SAA's in my computer, but can't forward on url. They're collectable and one is a factory converted Bisley, one of a kind. Is there any way for someone to post them for me if I send a few photos through an email?
|
May 1, 2012, 08:25 PM | #10 |
Senior Member
Join Date: December 2, 2011
Posts: 146
|
Center: Uberti Cattleman
American Western Arms. left: Peacemaker Right: Dakota I'll have have a pair of USFAs in a couple of weeks. |
May 1, 2012, 08:33 PM | #11 | |
Junior member
Join Date: August 8, 2009
Posts: 374
|
gunsmokeTPF wrote
Quote:
|
|
May 1, 2012, 09:14 PM | #12 |
Senior Member
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,332
|
These are some beautiful pistols y'all are posting!
|
May 1, 2012, 11:28 PM | #13 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
The center Uberti was done very nicely. They gave it the black powder frame with bullseye ejector and one piece grips. There should be a 3 line patent date along with the serial # on the cylinder, but my eyes are going and can't tell, but even if not it certainly has that early 1870's appearance along with the finish applied. That's as close to a 1st generation as you're gonna get. From a short distance it sure looks like an old colt. Very nice and the others are as well.
Last edited by gunsmokeTPF; May 1, 2012 at 11:35 PM. |
May 2, 2012, 12:53 AM | #14 |
Member
Join Date: March 9, 2012
Location: OreGUN!
Posts: 66
|
+1
What beagle333 said
|
May 2, 2012, 05:09 AM | #15 |
Senior Member
Join Date: July 15, 2007
Location: Illinois
Posts: 3,746
|
One new(2006) plain one is all I can afford now, but I'm planning on a 5.5" Nickel one in the future.
My 2006 made Colt SAA, is one of the finest built ones I've ever seen and my Dad has had over a dozen 1st generation SAAs at once before, so I've those and quite a few other 2nd and 3rd generations to compare it to. They did an excellent job on the one I own.
__________________
"No free man shall ever be debarred the use of arms."- Thomas Jefferson ΜΟΛΩΝ ΛΑΒΕ (>_<) |
May 2, 2012, 06:32 AM | #16 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
SAA's are beautiful guns but I know little about the finer details. What is the "B-P frame" I often see referenced?
|
May 2, 2012, 06:48 AM | #17 |
Junior member
Join Date: August 8, 2009
Posts: 374
|
I'm posting these at the request of gunsmokeTPF. They are his guns.....
The 1st picture is a Colt SAA 45LC mfg 1891. Was owned by Texas cowboy who was a movie xtra. 2nd is a 1970 2nd gen Colt SAA 45LC bought from Abercrombie & Fitch and customized. 3rd is a Cimarron Flat Top Target 44-40 with Alfonse of Hollywood rig and 100 year old buckle. |
May 2, 2012, 06:50 AM | #18 |
Junior member
Join Date: August 8, 2009
Posts: 374
|
I'm posting these at the request of gunsmokeTPF. They are his guns.....
4th Colt Bisley 32-20 mfg 1906 and converted by Colt to SAA using trigger guard and backstrap from 1904 SAA. Only factory example known by me. |
May 2, 2012, 07:09 AM | #19 |
Senior Member
Join Date: December 2, 2011
Posts: 146
|
Those are beauties. Awesome 6 shooters!!!!!!!!!
|
May 2, 2012, 09:19 AM | #20 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
Thanks Zullu and Towboat_er for posting for me. There is a slight mixup. The 1st example is actually the converted Bisley and the last is the 1891 example. I'm sorry the photos had been taken so poorly, but it's better than nothing I guess. Thanks all again.
|
May 2, 2012, 09:42 AM | #21 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
Mykeal, the smokeless powder frame has the spring type screw that's located just forward of the cylinder. You must press this and hold it down in order to remove the base pin (cylinder pin) to take out the cylinder from the frame. You have to use a screw driver to remove the base pin screw which is located on the front of the frame just below the barrel on the black powder frame. Many guns have their threads damaged through careless tightening, which then requires an oversized basepin screw.
|
May 2, 2012, 11:30 AM | #22 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Thanks. I learned something today.
|
May 2, 2012, 12:12 PM | #23 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
It was my pleasure. Most not into SA's wouldn't be aware of this as well.
|
May 2, 2012, 07:50 PM | #24 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
I just posted this on another thread yesterday so I'll post the other side here.
Uberti Cimarron in 44-40. This is a bp frame Mykeal. Bullseye ejector and no tranverse cylinder pin retainer. It has a screw going in at an angle at the front of the frame to retain the cylinder pin. This was the standard frame until the 1880's |
May 3, 2012, 06:31 AM | #25 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Thanks. I wallowed around in Cimarron's site looking at Model P frames; they call them 'pre-war' and 'old model', and the pictures aren't clear enough to really tell the difference.
Which brings up a question: if the black powder frame was standard until 1880's, what war is Cimarron talking about? Spanish-American? I guess I really should ask them. |
Thread Tools | Search this Thread |
|
|