The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old January 3, 2011, 06:20 PM   #1
chutestrate
Junior Member
 
Join Date: January 14, 2009
Posts: 1
Mix of 180 gr and 175 gr bullets in 10mm

I have a lot of 175 gr bullets and 180 gr bullets, all lead. I am finding more recipes for the 175 gr bullets than I am the 180 gr. Am I able to use the same load recipes for 180 that I am for the 175's? 5 grains doesn't seem like a lot, but I want to be sure.

For instance the lee book lists 175 gr starting load with aa9 at 12.2 gr. Could I use this for the 180's?
chutestrate is offline  
Old January 4, 2011, 09:53 AM   #2
overkill0084
Senior Member
 
Join Date: August 7, 2010
Location: Northern, UT
Posts: 1,162
If you stay under max for the 180s you will be fine. Just a quick glance looks like your load should be ok. As with anything you read on the internet, verify.

http://www.accuratepowder.com/wp-con...d_data_3.4.pdf
__________________
Cheers,
Greg
“At the core of liberalism is the spoiled child – miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosophy of sniveling brats.” — P.J. O’Rourke
overkill0084 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05837 seconds with 10 queries