|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 6, 2012, 09:36 PM | #1 |
Senior Member
Join Date: March 29, 2011
Location: Cape Fear!
Posts: 1,683
|
Rem 1100 FTF on last shot of mag.
With no plug in I can reliably cycle 3 shots out of the mag, but not the last. The round gets stuck about an inch short of making it completely on to the carrier. Spring weak? Magazine need cleaning maybe? I am getting ready to plug it and wonder if I should get a new magazine spring? It is a 79 model that is quite clean, but I have no idea how many rounds it has shot. Thanks.
|
February 6, 2012, 11:23 PM | #2 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
You might try putting an empty hull, as a spacer, in front of the mag spring.
|
February 7, 2012, 08:11 AM | #3 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
If it is from 1979, I doubt the springs have been changed out. Wolff has what you need - remember to replace the the main action spring as well. My 1100 was bad about breaking the firing pin recoil spring also
|
February 7, 2012, 11:27 PM | #4 |
Senior Member
Join Date: June 30, 2011
Location: LOXAHATCHEE, FL
Posts: 204
|
Sounds like a weak mag spring to me
__________________
"We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker. It is time to restore the American precept that each individual is accountable for thier own actions." ****BLEED BLUE, 10-8**** |
February 8, 2012, 03:23 PM | #5 |
Senior Member
Join Date: January 11, 2011
Location: North Carolina
Posts: 191
|
May want to polish/clean the inside of the magizine tube while you are at it because it will effect feeding.
|
|
|