|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
June 29, 2012, 08:44 PM | #1 |
Senior Member
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
|
Experienced opinion wanted on Glock 20, 10mm
I posted earlier asking about pistols with 10mm/.22 conversions. After considering the experienced opinions here and talking personally with some marksmen I've abandoned the "single pistol" idea. I've purchased a Ruger Mark III 22/45 for my trigger time. I'm now going to be saving towards the end goal; that is, a good, forever, last until I die, totally reliable, hunting and hunting rifle or shotgun backup (hogs primarily), and HD pistol.
I'm leaning heavily towards the Glock 20 in 10mm. My thoughts (with the pistol and caliber combination) are: it is reliable, it can drop a big animal with the heavy loads, it is accurate enough for my purposes, it can drop an intruder with lighter loads and not punch through walls, in my hands I swing up to a natural sight picture (as with the 22/45), and I don't have to sell a grandchild or save forever to get it. If I ever do want to do a conversion to another caliber then there are kits available. Lastly, I think it will fire a shot shell (for rattlesnakes in West Texas), but I need to check. Thoughts? Thanks on advance, Andrew Sent using Tapatalk 2 |
June 29, 2012, 08:50 PM | #2 |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,971
|
I've been happy with mine.
It's a big gun. Be sure you like the grip size before buying. I don't know of any shotsells available in 10mm. You'll have to load your own or buy a .40S&W conversion barrel and purchase .40S&W shotshells. For what it's worth, I don't believe that there are any decent self-defense loadings in 10mm (or any other decent handgun defensive calibers) that won't "punch through walls". If it penetrates deeply enough in human tissue to have a decent chance of inpacitating then it will penetrate enough through drywall to kill someone on the other side.
__________________
Do you know about the TEXAS State Rifle Association?
|
June 29, 2012, 09:25 PM | #3 |
Senior Member
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
|
Not having a shot shell is not a deal breaker for me.
I've not shot the Glock 20. I've just held a couple and they felt good to me. (Even though I have small hands, and I'm told the Glocks don't like small hands.) Anyway, as I've tried holding more pistols, very few come to a natural sight picture - most 1911s, the 22/45, and the Glock 20. With Luger angled grips, the front sight is almost always 1/4" to the left of the rear when I raise the gun and then open my eyes. Others are all over the place. But there are still tons I haven't tried. I never asked the salesmen, are there different sized grips for the Glock, so I need to be careful if I order? I'll certainly rent one to shoot before I buy, but I thought it'd start soliciting some guidance early. Thanks again, Andrew Sent using Tapatalk 2 |
June 29, 2012, 09:36 PM | #4 |
Senior Member
Join Date: March 14, 2010
Location: Central Florida
Posts: 813
|
If you want smaller grip, look for SF version. The grip frame is shorter just a little but it make a lot of difference in grip comfort - my G20SF feels almost the same size as my G23 (thickness wise, not the length obviously ).
Another bonus with G20 is you can buy caliber conversion barrels for .40SW, .357sig and 9x25dillon that will convert your glock to those calibers with simple barrel swap ( not even different magazine needed ) |
June 29, 2012, 09:54 PM | #5 |
Senior Member
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
|
Oooh, I didn't know the conversion was so easy. A simple barrel swap? Does a gunsmith need to do the initial fitting or is it just swap and go?
What round would produce a recoil similar to the 10mm, but be less expensive? Thanks again, Andrew Sent using Tapatalk 2 |
June 29, 2012, 10:04 PM | #6 |
Senior Member
Join Date: February 14, 2008
Location: Kansas
Posts: 753
|
LWD barrels, both conversion and 10MM are drop ins and lock up IMHO is tighter than OEM.
I think you'll find that only 10MM is going to recoil like a 10mm. |
June 29, 2012, 10:23 PM | #7 |
Senior Member
Join Date: October 14, 2011
Posts: 627
|
Yeah only 10mm feels like 10mm. It's a big auto round that delivers energy. At the risk of starting a flame-fest, I have a G21 with a custom G20/10mm compensated barrel that feels great to me. As much or possibly less recoil than a stock G21 .45.
__________________
Shoot smart. Shoot S-Mart. |
June 29, 2012, 10:24 PM | #8 |
Senior Member
Join Date: January 21, 2007
Posts: 436
|
I have a Glock 20C. Oh it is a fun and enjoyable gun to shoot. Have shot a friend of mines regular Glock 20 as well as a Bren 10. The compensated barrel on mine is a pleasure to shoot. I won't tell you anything about the grip size, etc, as you seem to be familiar with that, and also, the last time I voiced my 2 cents on this subject, I started a tirade with an internet expert. Like I said, I love my 20C.
Ralph |
June 29, 2012, 10:26 PM | #9 |
Member
Join Date: June 3, 2012
Posts: 41
|
Glock 20
As other have said the G20 is exceptional. I got one3 years ago and have been very pleased. The only problem is if you plan on taking classes where lead free or frangible ammo is required,( like TR) its very difficult to get in 10mm. My next purchase will be a 40 SW conversion barrel to get around the ammo problem for classes.
|
June 29, 2012, 10:27 PM | #10 |
Senior Member
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
|
That's good information. Thanks. I'm filing that away.
Sure, only a 10 will recoil like a 10. But what would be the next closest? Perhaps it is irrelevant but I'm curious (and away from pistols for a very long time). I'm a relatively small guy, but for whatever reason I've never had an issue with recoil (shotguns, rifles, or pistols). But I'm all for utility and savings. Thanks, Andrew Sent using Tapatalk 2 |
June 29, 2012, 10:42 PM | #11 |
Senior Member
Join Date: May 30, 2009
Location: Southeast LoUiSiAna
Posts: 188
|
Be sure to consider the newer Gen 4 models with the grip panel replacements. I went with the G-29 and there are aftermarket barrels longer than the 3.78" stock. Although mine has the short barrel it is very accurate for a smaller package. Mine also sports conversion barrels for 40S&W, 357Sig and 9x25Dillon.
You might also consider visiting the new 10mm forum... http://10mm-firearms.com
__________________
TheSHADOW The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'! |
June 29, 2012, 10:44 PM | #12 |
Senior Member
Join Date: October 14, 2011
Posts: 627
|
Mmm probably the closest to 10mm recoil would be a revolver round, which I know doesn't help you I'd guess you're looking for a .40, which are becoming more popular thus cheaper rounds.
__________________
Shoot smart. Shoot S-Mart. |
June 30, 2012, 01:10 AM | #13 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,296
|
llike mine
I've had an early G20 for several years now, and it has become my universal HD woods gun, retiring a 629 Mtn and a Ruger B-hawk .357. One of its big attributes is that it is flat and compact and totes easy. I do not worry about scratches, muck or dings. It ususally rides in a M84 flap holster, and I've fashioned a lanyard for it as well. I thas a 3.5 trigger and the stock fixed sights. Been super reliable to date.
For a stock, portable duty size auto pistol it is much gun, but not the equal of full house .41Mag as is sometimes touted. The 15+1 beans in the hand is a plus, but never been needed. Loaded down, bamaboy shoots it in IDPA club matches. We are shopping for the Lone wolf .40 barrel. The .40 ammo and brass is more easily obtained. We hoard any 10mm brass at matches. Kinda neat though, nobody else shoots 10mm, so the 10 is ours. Guys always give us a few they've picked up. You can't say that about other cals. Another negative is that Glock rifling is not good with lead slugs. So if youi high volume shoot, the cost is up for jacketed slugs (loaded down, we've had good luck thus far with plated Raineers) The advice on the grip is sound. They are big and some just can't manage or warm-up to them. But neither the boy or I have huge hands, and we manage the pistol fine. I climb a few trees with it every season, but have not had a deer parade past that I could shoot. |
June 30, 2012, 06:38 AM | #14 |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
I'm a big fan of my Gen4, a review video is below. I've got a Gen3 20 SF and Gen3 21 SF with conversion as well and the textured grip of the Gen4 is a big advantage for follow up shots (at least for me). http://www.youtube.com/watch?v=pBIj5...&feature=inbox
__________________
Mrgunsngear Youtube Channel |
June 30, 2012, 07:13 AM | #15 |
Senior Member
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
|
Thank you everyone. I'm appreciating the input I am receiving here.
Sent using Tapatalk 2 |
June 30, 2012, 08:27 AM | #16 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,805
|
I own a G-20 as well as a 21, 19X2, 26, 17, and assorted 1911's, revolvers, a Kel-tec P3-AT and a Sig. The G-20 is one of the last I'd sell, but it is also the one used the least. I like the gun and caliber, but feel for personal protection from 2 legged predators it is just more than I need. I have several other options that I consider better for that use.
The G-20 is my dedicated hiking/woods/camping pistol. It offers more power than I could get in an equal size 357 revolver with less weight, more reliablity in outdoors conditions, and less expense for 4 legged threats. With 16 rounds available it is also capable of working for 2 legged threats. It does double duty better than any other option I have. For large game hunting one of my 44 mag revolvers would be a better option. As far as using it for hunting larger game it is capable of doing anything a 357 revolver would do. But if hunting were my primary purpose I'd still buy a revolver. I find the Glock to be more accurate in rapid fire SD situations, but a long barreled revolver more accurate for long range precision work. In my opinion this is the reason the 10mm will always be a niche gun and never be mainstream. But that is OK with me. It fills an important niche in my collection and there are enough who need that niche filled that I feel comfortable that the guns and ammo will always be around. |
June 30, 2012, 04:06 PM | #17 |
Senior Member
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
|
Yeah, I fondly remember hunting with my dad and his single shot .44 magnum Thompson (Bearcat I think). An old girlfriend's dad had a long barreled .44 revolver that was a dream to shoot. I remember I couldn't believe how far away a can could be and I'd still nail it with that pistol. One of these days...
This was intended to be primarily for if I need a finishing shot on a hog, an alternative hunting gun for the right circumstances, and HD. I have two shotguns, one at each end of the house, that will be my primary HD weapons. So that does make me think that maybe I should consider a revolver. Right now I can only afford one big bore pistol and I'm looking to stay close to $500, so anything will have some compromise to it. But would the Glock be that much less accurate at (let's say) less than 50 yards? Sent using Tapatalk 2 |
June 30, 2012, 05:19 PM | #18 | |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
Quote:
__________________
Mrgunsngear Youtube Channel |
|
June 30, 2012, 05:24 PM | #19 |
Senior Member
Join Date: September 8, 2010
Posts: 495
|
The Glock 20 is probably one of my favorites. Mine is magnaported, which I really like. If you're into reloading, then you'll find it's about the same cost to shoot 10mm as .40 S&W.
A good conversion barrel to .40 S&W isn't a bad idea, either. The G20 is softer shooting then other Glock .40 S&W pistols thanks to it's heavier weight. I had reliability problems with a G20 Lone Wolf barrel, so my advice is spend the extra money and get a KKM, mine has been 100%. 10mm magazines will feed and function with .40 S&W or .357 Sig ammo. I use a different spring for .40 S&W, but that's not necessary for all loads. |
June 30, 2012, 05:58 PM | #20 |
Member
Join Date: June 13, 2012
Location: Navarre, FL
Posts: 46
|
I have a 20SF Gen 3 and love it. I don't like gen 4 grips, too aggressive for me. I have been shooting Hornady 155 XTP on starline brass, CCI LPP and 12 grains of AA#7. I don't have a crono yet so I just load middle of the road and don't push things. At 7 yards, I get a nice 2 inch hole on the bull and at 15 yards all the rounds fall in the 6 ring or better. I have been away from shooting many years but this gun made it like riding a bike.
It serves for HD as well. There is a S&W 642 on my wife's nightstand and I have the G20. I seemed to have forgotten the Mossberg 500 next to the bed... The bullet choice was based on the free 500 rounds I got from Hornady for buying a LnL press! |
July 16, 2012, 09:56 AM | #21 |
Senior Member
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
|
Thanks for all the great feedback. I am going to go with the Glock 20 SF. Yet I do have a follow up question.
I want to get a .40 barrel as-well-as a 10mm barrel. However, for the 10mm barrel I would like one that is 6". Can I buy a .40 and then put a 6" 10mm aftermarket barrel on it or is the frame/strength/build such that I really need to buy the pistol as a 10mm and then buy aftermarket barrels in both .40 and 10mm? (Obviously, I'm hoping for the former.) Thanks again, Andrew NRA Life Member ------------------------ "There are some ideas so preposterous that only an intellectual will believe them." - Malcolm Muggeridge |
July 16, 2012, 11:23 AM | #22 | |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
Quote:
__________________
Mrgunsngear Youtube Channel |
|
July 16, 2012, 11:51 AM | #23 |
Senior Member
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
|
(Sigh) I kind of figured, but for a few hundred bucks it was worth asking. I'll get the Model 20SF and then add the barrels as the budget allows.
Thanks, Andrew NRA Life Member ------------------------ "There are some ideas so preposterous that only an intellectual will believe them." - Malcolm Muggeridge |
July 16, 2012, 07:22 PM | #24 |
Senior Member
Join Date: October 18, 2011
Posts: 1,246
|
10mm cost a lot to shoot and doesn't have development that goes into other defense calibers. Sometimes I just want to get hurt shooting a full power load but the large frame glock tames it so well that it takes out the fun at the range. Like another poster said ...I won't sell my g20SF but I don't shoot it much either
|
November 3, 2012, 09:23 PM | #25 | ||
Junior Member
Join Date: November 3, 2012
Posts: 1
|
Quote:
Quote:
|
||
Thread Tools | Search this Thread |
|
|