|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 10, 2007, 11:02 PM | #1 |
Member
Join Date: December 18, 2006
Location: New Zealand
Posts: 57
|
Brass necking down question
Im necking down some Lapua 308 brass for my 7/08, full length die, sizing wax and dry neck lube, it looks as if the necks are being pulled well out of square. Theres quite a bit of force required to get the case back out of the die so im wondering if the expander plug is the cause?
How else can i lube the inside of the neck? The dry neck lube doesnt look to be "sticking" to the inside of the neck. Any help appreciated...
__________________
Happiness.......is a warm gun |
March 11, 2007, 02:07 AM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Put some sizing lube on a bore brush and brush the inside of the necks every 3 or 4 rounds. Or get a carbide expander ball.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
|
|