.33 Winchester loads

**44 AMP** · December 6, 2012, 09:56 PM

A friend of mine has gotten a .33 winchester, and is looking for load data, using powders other than IMR 3031 or 4895.

Anyone have that information?

Catfish · December 7, 2012, 10:21 AM

I got this data from a book that list the source as Barns and have never tried it. I would recomand you start down 10% and work up. 47 gr. of IMR 4895 with a 200 gr. Flat nosed bullet.

**44 AMP** · December 7, 2012, 02:19 PM

Thanks Catfish. He has data for 3031 and 4895, we're looking for data for other powders.

Scorch · December 8, 2012, 03:42 AM

Here ya go, data for 4320 and 4350
http://www.reloadersnest.com/frontpa...?CaliberID=315

December 6, 2012, 09:56 PM	#1
44 AMP Staff Join Date: March 11, 2006 Location: Upper US Posts: 28,820	.33 Winchester loads A friend of mine has gotten a .33 winchester, and is looking for load data, using powders other than IMR 3031 or 4895. Anyone have that information? __________________ All else being equal (and it almost never is) bigger bullets tend to work better.

December 7, 2012, 02:19 PM	#3
44 AMP Staff Join Date: March 11, 2006 Location: Upper US Posts: 28,820	Thanks Catfish. He has data for 3031 and 4895, we're looking for data for other powders. __________________ All else being equal (and it almost never is) bigger bullets tend to work better.

December 8, 2012, 03:42 AM	#4
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Here ya go, data for 4320 and 4350 http://www.reloadersnest.com/frontpa...?CaliberID=315 __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

December 7, 2012, 10:21 AM	#2
Catfish Senior Member Join Date: November 30, 2010 Location: Ohio Posts: 171	I got this data from a book that list the source as Barns and have never tried it. I would recomand you start down 10% and work up. 47 gr. of IMR 4895 with a 200 gr. Flat nosed bullet.