|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 21, 2013, 10:27 PM | #1 |
Member
Join Date: July 28, 2011
Location: Churchs Ferry, ND
Posts: 70
|
Enfield 303 british identification help
I'm trying to figure out what year my dads 303 British is can anyone help? On the right side of the gun just above and behind the trigger it looks like it says enfield 191? (Can't read the last number cuz it's about wore off) below that it looks like SH with three III below it and F.T.R. Below that.
There is a U stamped on the front side of the bolt. At the breech it's stamped V 8941 Under the rear sight it's stamped in three different spots 2930. V8941. P3467 Left side of breech stamped BNP X4 The safety is stamped III and says England just below the safety mech. The trigger guard is stamped k3x Thanks for the help
__________________
" If I die don't let my wife sell my rifles for what I told her I payed for them" Last edited by ryans01z28; March 21, 2013 at 10:33 PM. |
March 21, 2013, 11:35 PM | #2 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
well it's a enfield number 1 MKIII, I'm thinking the 191? is the date but I could be wrong. I'm no expert on enfield markings. the BNP is the proof mark saying it's cleared for exportation.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
March 21, 2013, 11:43 PM | #3 |
Member
Join Date: July 28, 2011
Location: Churchs Ferry, ND
Posts: 70
|
I think it says 1918 but its hard to see
__________________
" If I die don't let my wife sell my rifles for what I told her I payed for them" |
March 22, 2013, 08:42 AM | #4 |
Member
Join Date: January 17, 2011
Location: Central Illinois
Posts: 79
|
Ryan I got such a chuckle at the quote at the bottom of your posts. I believe I need to pass that info on to my brother or somebody.
|
March 22, 2013, 08:43 AM | #5 |
Member
Join Date: July 28, 2011
Location: Churchs Ferry, ND
Posts: 70
|
Lol thanks!
__________________
" If I die don't let my wife sell my rifles for what I told her I payed for them" |
March 22, 2013, 10:44 AM | #6 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
Did your Dad cut it down/sporterize it, or was it already done when he got it ?
They DO make pretty nice deer rifles - My best friend's first deer gun looked pretty much like yours (45 years ago). . |
March 22, 2013, 10:51 AM | #7 |
Member
Join Date: July 28, 2011
Location: Churchs Ferry, ND
Posts: 70
|
I'm not sure he's been gone for about 17yrs now. The barrel appears to have been cut down an inch or more I guess. There's a ring that goes around the barrel and attaches to the stock and you can see where it's been moved back because the paint is gone on the barrel about an inch. I wanted to make a case and display the gun in memory of him with the gun info. I know it was used as a deer rifle at one point but that's all I know about the gun since I've had it
__________________
" If I die don't let my wife sell my rifles for what I told her I payed for them" |
March 23, 2013, 12:36 AM | #8 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
I might be wrong but the barrel I think is this the correct length as the front sight post looks correct for that model. I can see the ring where you describe but there was originally a wooden handguard between the band and the barrel so it shouldn't have touched at all. in addition it sat about an inch or so forward of that mark so I doubt that was cause by a stock band. it looks like the ban was the reference point where the stock was cut down and rounded off to look more natural.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
March 23, 2013, 07:07 AM | #9 |
Senior Member
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
|
The No1 Mark III was made up until 1916, but the "FTR" on your rifle shows it went through a "Factory Thorough Refit", meaning it was rebuilt either during or after WW1. These rifles were manufactured by 5 different manufacturers, and the only way to know who originally made this one is to see if there are any marks left of the original socket stamp (usually initials over the original model stamp).
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936. |
March 25, 2013, 05:55 PM | #10 |
Member
Join Date: July 28, 2011
Location: Churchs Ferry, ND
Posts: 70
|
Where do I find that stamp at??
__________________
" If I die don't let my wife sell my rifles for what I told her I payed for them" |
March 26, 2013, 05:18 AM | #11 |
Senior Member
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
|
It should be on the same side as the other markings (where it has "III") above the date and below a crown and "GR"; it sounds like most of them have been buffed out, but you might be able to see enough to figure out who made your rifle. Rifles made by Birmingham Small Arms have "B.S.A. Co." in this spot, those made by London Small Arms have ""L.S.A. Co.", those made by Ishapore have "Ishapore", those made by Enfield have "Enfield", and those made Lithgow have "Lithgow". In this case, the first 2 are your most likely possibilities, since they're usually easier to deface over time.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936. |
March 26, 2013, 09:54 AM | #12 |
Senior Member
Join Date: January 28, 2006
Posts: 1,482
|
Ryan, PM Tikirocker about your Enfield. He's a venerable encyclopedia when it comes to these rifles.
__________________
NRA Life Member "We have enough gun control. What we need is idiot control." |
March 27, 2013, 07:34 PM | #13 |
Member
Join Date: March 2, 2012
Location: Northwest UK
Posts: 36
|
Not sure about the other markings but BNP = British Nitro Proof
__________________
Mike |
March 28, 2013, 10:53 AM | #14 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
A couple of minor corrections if I may.
FTR = "Factory thorough repair" BNP = Birmingham nitro proof.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
|
|