|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
December 1, 2002, 09:42 PM | #1 |
Junior Member
Join Date: November 27, 2002
Location: mississippi
Posts: 3
|
im wanting to get into reloading
i want to get into reloading hoping to save a little $$$ and learning something new what brand or kit should i get im on a very limited budget though what do yall think about LEE anniversery kit from midway.com would that be worth it even though it is a single press ??? mainly i want to reload .30 caliber M-1 carbine and .45acp maybe .44 mag. both fmj ammo just to plink with.
|
December 1, 2002, 10:22 PM | #2 |
Senior Member
Join Date: March 25, 1999
Location: KS
Posts: 1,558
|
I was in the same boat as you a few years ago, limited funds wanted unlimited shooting.
I bought the Lee kit from Midway and was pleased. Year or so later I replaced the single stage with a turrent press and am still pleased. I've loaded thousands of rounds of .38 spcl., .357 mag, 41 mag, 9mm, 45acp, 30 carbine, 22 hornet, 25.06 & .270 on my Lee without a problem. If I were a high volume competition shooter I'd probably go with a Dillon progressive or the like but for me that would be overkill. Be sure to get some load manuals. Lymans 47th, Modern Reloading by Lee are good. Check your public library for reading material too. Extras you might want to get are a dial caliper for measuring overall length - Midway has one reasonably priced - and a kenitic bullet puller. A brass tumbler is good to have but that can come later. Be safe!
__________________
"I don't mind it when stupid people say stupid things. Stupid people should be encouraged to say stupid things, that way we always know who the stupid people are." ~ Ted Nugent http://www.awbansunset.com/awcountdown_sm.gif |
December 1, 2002, 11:13 PM | #3 |
Senior Member
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,289
|
First, buy a Lyman reloading manual and read it cover to cover. Then, talk to other folks at your gun club that reload.
I personally do not like Lee products, except for their factory crimp dies. However many folks are pleased with them. Quality reloading presses and dies will last a lifetime. If I'm going to make life time investments, I want to buy the best, not the most economical. Redding is the best. But Lyman, RCBS, Hornady, Pacific and C&H are all excellent as well.
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs. |
Thread Tools | Search this Thread |
|
|