Revolver stock repair?

guitar1580 · November 11, 2011, 07:28 PM

I have about a 1/4" chunk missing out of the bottom edge / corner of a decent set of old S&W diamond revolver stocks. Is there anything at all that can be done to make something like that look less noticeable, or is it just something to live with. I thought of at least sanding the jagged edges a little and dabbing some stain on it ... not sure about filling it. Any suggestions would be helpful.

Josh P

Scorch · November 12, 2011, 01:21 AM

Fill it with a piece of matching wood, sand and finish
OR
Sand and finish.

November 11, 2011, 07:28 PM	#1
guitar1580 Senior Member Join Date: December 8, 2009 Posts: 201	Revolver stock repair? I have about a 1/4" chunk missing out of the bottom edge / corner of a decent set of old S&W diamond revolver stocks. Is there anything at all that can be done to make something like that look less noticeable, or is it just something to live with. I thought of at least sanding the jagged edges a little and dabbing some stain on it ... not sure about filling it. Any suggestions would be helpful. Josh P

November 12, 2011, 01:21 AM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Fill it with a piece of matching wood, sand and finish OR Sand and finish. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services