|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 8, 2010, 02:06 AM | #1 |
Member
Join Date: December 5, 2008
Posts: 38
|
Rebarreling 700 .270 into target rifle
Hi guys,
I don't have any experience with this, but I'd like to rebarrel this 60's vintage long action into a target/varmint rifle. I don't want to mess with the boltface, and it would be ok if the magazine didn't feed. Could I use this long action and go with a 6mm cartridge? I was thinking 6mm Rem, 6br, 6xbr... I don't know if 6mm rem is a short action round and I'm aware that the others are generally shot in short actions. Would this type of project be workable? With the right barrel and trigger, a bedding job, with my large action and stock if it would work, is .25MOA asking too much? Sure could use some insights. Thank you. |
April 8, 2010, 07:17 AM | #2 |
Senior Member
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,832
|
For the long action, a 6.5x55 swede or 6.5x284 seem more appropriate (and would fit into the bolt head). For the short 6 mm cartridges I'd start with the right system with all the money and labor you plan to put in.
__________________
I used to love being able to hit hard at 1000 yards. As I get older I find hitting a mini ram at 200 yards with the 22 oddly more satisfying. |
April 8, 2010, 08:53 AM | #3 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
There is no law that says you have to use a short action Remington to make a target rifle.
If their is, then the Army is in trouble, the M24 Sniper system is made on the 700 Long action, it uses a 308. They tend to shoot pretty good. Its the Marines that went to the short action.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
April 8, 2010, 08:55 AM | #4 |
Senior Member
Join Date: October 21, 2009
Location: Black Hills of S. Dakota
Posts: 195
|
I just did up a 6mm CM for a guy.
Very easy cartridge to do. 243 with the bullets seated long, it fireforms and then you stuff it full of a slow powder like H1000. You'll get between 3500-4000 rounds and still keep the velocity for slingin the big 105-115 grain 6mm bullets out to 1K. A BR will certainly work in your action but unless it's going to be a single shot, getting it to feed in a box magazine is going to be a challenge. Historically they've never been easy to do, although it is possible. Reamer is in stock and I'm pretty sure I have 8 twist barrels as well. Target rifles for International Palma, NRA Highpower, Benchrest, Silhouette, and Olympic smallbore/NRA prone, and 300m are my specialty.
__________________
LongRifles, Inc. "More than a business, This is a lifestyle." www.longriflesinc.com |
|
|