September 6, 2013, 09:11 PM | #1 |
Junior Member
Join Date: November 4, 2012
Posts: 7
|
Bottom barrel in trap
I've been shooting singles trap with a modified choke in top and bottom barrels of my Beretta Silver Pigeon I. I seem to shoot fine out of the top barrel, but I have a really hard time connecting if I shoot from the bottom barrel.
I don't understand why this would be. Any notions? -AS |
September 6, 2013, 09:21 PM | #2 |
Senior Member
Join Date: May 6, 2012
Location: Southeast Texas
Posts: 1,670
|
Bottom barrel in trap
Have you patterned the gun to see how it prints at various ranges with different chokes and different shot?
|
September 6, 2013, 09:23 PM | #3 |
Senior Member
Join Date: December 7, 2009
Location: Western New York
Posts: 2,736
|
The only logical reason would be that the barrels don't shoot to the same poi at the distance the birds are being broken at. I've seen shotguns shoot diferently but never a Beretta, Browning, or other high quality shotgun. I'd suspect that you're being pysched out by the fact you're using a different barrel and are subconciously doing something different. This can easily be checked by shooting the gun at a given distance (I'd suggest 25yds) at a patterning board or target and seeing if the barrels are regulated.
|
September 6, 2013, 09:24 PM | #4 |
Junior Member
Join Date: November 4, 2012
Posts: 7
|
I haven't. I definitely should.
But why would, given same box of shells and same choke, the two barrels give different results? |
September 6, 2013, 09:26 PM | #5 |
Junior Member
Join Date: November 4, 2012
Posts: 7
|
Right. This is an "is it me or the gun" question, I think. I will pattern it and find out which.
|
September 7, 2013, 01:57 AM | #6 |
Senior Member
Join Date: February 3, 2013
Posts: 1,235
|
It is also possible that, even if the barrels are well regulated, that the problem is the chokes, even if both are modified. Pattern each barrel with the identical choke.
Actually, for patterning the barrels it is best to use the tightest choke you have. Then test the medium chokes to see if they are misdirecting your shot. |
September 7, 2013, 06:07 AM | #7 |
Junior member
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981
|
All it takes is for one barrel's choke to be ever so slightly off center when they threaded the barrel, let alone not have the barrels in perfect regulation
|
September 7, 2013, 08:32 AM | #8 |
Senior Member
Join Date: December 7, 2009
Location: Western New York
Posts: 2,736
|
I've had bad chokes before and sent them back for replacement. However, this problem causes the barrels to be unregulated so the same test applies. If they aren't regulated, switch chokes and try again. Might just need to replace a choke.
|
September 7, 2013, 10:38 AM | #9 |
Senior Member
Join Date: April 8, 2013
Posts: 251
|
Agent, the world of a double barrel gun, even a shotgun, revolves around the barrels being regulated or properly made to hit the same place. This is not as easy as it might seem at first...
There are two other mental things... One is the recoil is throwing you off the second, punishing, shot. I'm not allowing physical changes into the issue as that would be too obvious, as in "hey Matt, after I fire my first shot I'm pointed at the clouds and my second shot, when I think I'm back on target, misses -- why?". Two is just the feel of the shots are playing with your head... The under-barrel has a more direct line of recoil and some serious Trap shooters use single under-barrel shotguns (known by us as unsingles) that have very high ribs. Can you fire the under-barrel first and THEN the upper and see what happens after a few boxes of that? |
September 7, 2013, 12:59 PM | #10 | |
Senior Member
Join Date: February 3, 2013
Posts: 1,235
|
Quote:
|
|
September 7, 2013, 06:55 PM | #11 | |
Senior Member
Join Date: April 8, 2013
Posts: 251
|
Quote:
Please reread the opening post. Even the title of the thread... |
|
September 8, 2013, 03:34 AM | #12 |
Senior Member
Join Date: February 3, 2013
Posts: 1,235
|
I assumed he meant singles because of what the OP posted and the title of his thread, but wondered why you were posted about the recoil of his first shot throwing the OP's second shot off. Looking at it, I guess your reference to doubles wasn't about the OP's singles game, but what could happen when one shot doubles.
|
September 8, 2013, 11:59 AM | #13 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
Assuming the gun doesn't have a POI issue, have a friend go with you and load the gun and not tell you which barrel is loaded and see if that helps any.
|
September 8, 2013, 02:54 PM | #14 |
Senior Member
Join Date: February 3, 2013
Posts: 1,235
|
Virginian's idea is ++. In the same vein, have a buddy switch the chokes so you don't know which one is being fired. (make sure you mark them somehow so you can tell the two modifieds apart.)
|
September 11, 2013, 05:51 AM | #15 | |
Senior Member
Join Date: July 30, 2010
Posts: 857
|
Quote:
I'm not sure I understand this suggestion if the idea is supposed to be the shooter won't know which barrel shoots first - can you explain it further? Seems a trip to the pattern board with the chokes should sort out any aiming problem. You also have to understand and see the pattern dispersal - 70:30, 60:40, 50:50 etc. from the horizonal. Last edited by buckhorn_cortez; September 11, 2013 at 08:12 AM. |
|
September 11, 2013, 06:34 PM | #16 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
One of your chokes may be the problem. Swap the chokes to see if that makes a difference.
Buckhorn, My Beretta trap combo has the same set up, but the set screw has it shooting the top barrel first. This is to accommodate the single barrel. |
September 11, 2013, 08:29 PM | #17 |
Senior Member
Join Date: February 3, 2013
Posts: 1,235
|
True, Buckhorn. If the shooter wants to peek at the tang barrel selector they can defeat the test. For me, it would be difficult with my prescription shooting glasses as it is very difficult for me to read things up close. I don't think anyone is proposing a double blinded scientific study and is it that difficult to remove your set screw.
Similarly, if you swap the chokes it would also be best if the shooter doesn't know which of the two mods are in which barrels. He may be able to look and partially defeat the value of the test (if he can tell the two apart) but why would he? |
Tags |
beretta , over under , trap |
Thread Tools | Search this Thread |
|
|