The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old October 25, 2000, 05:10 PM   #1
redhawk44p
Senior Member
 
Join Date: December 28, 1999
Posts: 207
I am looking for a good deer load for this pistol.

I have tried 50 gr. of 2F but it seems too light. Should I use 3F? Any help would be appreciated. Thanks
redhawk44p is offline  
Old October 26, 2000, 05:33 PM   #2
Nevada Fitch
Senior Member
 
Join Date: October 21, 2000
Posts: 261
Yes You can use 3F It might be better or You may not be able to tell a difference.But you don't have to stay with 2F. I shoot 3F in my 54 cal Rifles with no problems and very good accuracy.I also think you get better inition with 3F. also I would not hesitate to shoot up to 75 grains of powder.work up slowly from 50 grains. If your gun is shooting accurately at 50 watch as you move up and if accuracy goes out the window you will know when to stop and back back down a little till you are happy with the results.
Nevada Fitch is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.04001 seconds with 10 queries