|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 21, 2013, 08:06 PM | #1 |
Senior Member
Join Date: May 22, 2011
Posts: 12,197
|
PPQ M2: Minor Design Annoyance
This likely falls in the category of complaints, but I'm ready for the rotten fruit.
So I spent a lot of time dry firing and handling my PPQ M2 yesterday. In that process I noticed something. When Walther redesigned the magazine release for the button, they added a bit of a shelf underneath the button. My guess is this was done to prevent the button from being hit accidentally. That's all well and good. The problem isn't that, it's the fact that its reversible. You see on the other side of the grip what you're left with is a piece of polymer jutting out there. Now on the side you choose to have the button it's a non-issue as the button occupies that space. However, assuming you keep the button on your thumb side this means you have a nice little piece of polymer jutting between your index finger and middle finger of your shooting hand. And with a grip that is very sculpted in the front it is very noticeable. As in annoyingly noticeable. Now I don't blame Walther per se, the way around it would to have been to sink the button into the frame and I'm not sure how feasible that was as they had to modify an existing design. But by basically adding material in an area where there was no material before it mars what is otherwise to me a perfect grip. Obviously the issue doesn't affect the paddle style. I attached some pics so you can see yourself. Is it a minor gripe? Prob, but it does feel darn weird (stick something between those two fingers while holding a pistol to get an idea). More so when I know what the alternative could be. -TR
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
March 21, 2013, 08:10 PM | #2 |
Senior Member
Join Date: April 18, 2011
Location: The Woods
Posts: 1,197
|
is it something you could sand off? Assuming you're not planning on changing it to the other hand or selling it that is....
__________________
si vis pacem para bellum |
March 21, 2013, 08:10 PM | #3 |
Senior Member
Join Date: May 13, 2012
Location: SW FL
Posts: 953
|
Man, you have some nice toys!
|
March 21, 2013, 08:10 PM | #4 |
Senior Member
Join Date: May 22, 2011
Posts: 12,197
|
^ You could prob dremel it off I bet, then sand it with some fine steel wool.
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
March 21, 2013, 09:20 PM | #5 |
Senior Member
Join Date: April 28, 2012
Location: NY
Posts: 184
|
Get yourself the one with original mag release. Love mine.
|
March 21, 2013, 09:43 PM | #6 |
Senior Member
Join Date: November 23, 2010
Posts: 4,862
|
One more reason Walther should have left the excellent mag release design of the P99/PPQ alone.
|
March 21, 2013, 10:08 PM | #7 | |
Senior Member
Join Date: May 22, 2011
Posts: 12,197
|
Quote:
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
|
March 22, 2013, 09:40 AM | #8 |
Senior Member
Join Date: April 25, 2012
Location: NC
Posts: 148
|
It took me a while to get use to the mag release on my PPS but now I prefere it over the push button style.
|
March 22, 2013, 09:43 AM | #9 |
Junior Member
Join Date: July 2, 2007
Posts: 9
|
i still dont know why they changed the mag release, i think once you get used to the paddle style, about an hour, it is vastly superior...at least in my opinion...you do not need to change the grip at all to activate it...
i also think they made a mistake by not making the magazines between the classic and m2 compatible...but hey what do i know |
March 22, 2013, 10:58 AM | #10 | |
Senior Member
Join Date: January 8, 2013
Location: Washington State
Posts: 246
|
Quote:
Or are you just going to have both? |
|
March 22, 2013, 11:09 AM | #11 | |
Senior Member
Join Date: May 22, 2011
Posts: 12,197
|
Quote:
The PPQ is not an "improvement" of the P99. It's essentially a different version. The P99 has an amazing trigger as well. It has the exact same reset. The only difference is it has a DA first trigger pull (and a very nice one at that). Some folks prefer that, some folks don't. The P99 in SA actually has a lighter trigger pull than a PPQ. The trigger is just as nice. If it was an original PPQ, I wouldn't really have any gripes. But I just don't see the appeal of this change. Essentially it should make folks used to the "traditional" method happy. But frankly I don't think it was executed overly well. But to do so they had to change the original design of the pistol, and I never expect something like that to go very well.
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
|
March 22, 2013, 03:29 PM | #12 |
Senior Member
Join Date: May 22, 2011
Posts: 3,611
|
you are the guy that ditched his P30's right? How are you liking the less abrading PPQ grip?
nice to see you back to the Walthers. Yes. Annoying. Thanks to everyone who couldn't learn the superiority of the paddle release. It really is Walthers fault. They could easily have made a youtube with a person point a gun at a wall with a laser on. I bet $100 that even a profession shooters laser moves less with the paddle release than the thumb release. but what do I know. And a correction: the P99's AS trigger is actually 4.5lb on single action. That is less than the PPQ. |
March 22, 2013, 08:56 PM | #13 | |
Senior Member
Join Date: May 22, 2011
Posts: 12,197
|
Quote:
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
|
March 23, 2013, 08:46 AM | #14 |
Senior Member
Join Date: July 3, 2011
Posts: 1,368
|
And considering you can safely carry the P99 in Anti-Stress mode with that lighter pull, it really gives up nothing to the PPQ.
This was good info TR, thanks. That would drive me crazy. |
March 23, 2013, 10:52 AM | #15 |
Senior Member
Join Date: August 22, 2008
Location: las vegas, NV
Posts: 409
|
I had a p99 AS and a PPQ, and gave up on the p99 for the PPQ. For me, I couldn't get used to the slight resistance and pop when the AS mode passed the notch for the short SA mode. I could feel it and it drove me nuts. I know it was a minor issue, but the PPQ trigger just felt better for me.
|
March 23, 2013, 06:16 PM | #16 |
Senior Member
Join Date: September 25, 2012
Location: Chester Va
Posts: 360
|
I want a PPQ and can't find one. Maybe I'll look for a P99 as.
|
March 24, 2013, 10:56 AM | #17 |
Senior Member
Join Date: August 22, 2012
Posts: 1,031
|
WALTHER RUINED THE GUN WITH THAT IDIOTIC MAG RELEASE.
/endrant |
March 24, 2013, 11:33 AM | #18 | |
Senior Member
Join Date: May 22, 2011
Posts: 12,197
|
Quote:
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
|
March 24, 2013, 04:26 PM | #19 |
Senior Member
Join Date: April 18, 2011
Location: The Woods
Posts: 1,197
|
I managed to get mine into my vest pocket when I went out to shoot earlier today. A bit of it was sticking out, so I guess it would have been "open pocket carry" but it was in there.
I'm guessing there was confusion between the PPQ and the PPK.
__________________
si vis pacem para bellum |
March 24, 2013, 05:26 PM | #20 | |
Senior Member
Join Date: May 22, 2011
Posts: 12,197
|
Quote:
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
|
March 24, 2013, 09:12 PM | #21 | |
Senior Member
Join Date: November 23, 2010
Posts: 4,862
|
Quote:
In fact, it's sold as the P99Q or P99RAD in Europe. |
|
March 25, 2013, 03:54 PM | #22 |
Senior Member
Join Date: May 22, 2011
Posts: 3,611
|
well, same sear.
|
Thread Tools | Search this Thread |
|
|