The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old March 28, 2013, 03:31 PM   #1
SerenityNetworks
Senior Member
 
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
Home bluing

I have an old (1930s vintage) .22. It has a chocolate brown finish. However, there are a lot of worn and stained spots, as well as scratches. I don't mind the worn and stained spots much, but the scratches look bad. I love the brown finish (is it still called bluing?). Anyway, I wouldn't mind a home project in putting on a new finish. However I'd waste a lot of time in researching what to do when all I need to do is ask the experienced folks here.

Would someone mind pointing me to a recommended method or two?

Thanks,
Andrew
SerenityNetworks is offline  
Old March 28, 2013, 04:03 PM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
The blued finish on your rifle has degraded to the point of being "patina", i.e. a polished oxidized surface. The original factory finish was hot tank caustic bluing, and as such involves the use of high temperature highly caustic concentrated metal salts baths to convert the surface iron molecules to a stable form. This colors the metal a dark grey or black and slows any rusting. This is a hazardous process done by trained people with proper equipment, and not a home hobby project.

Home bluing is typically a cold bluing process, involving solution or gels containing acids that react to form a coating on the metal surface. If done well they can look anywhere from lousy to OK, but cold bluing solutions were originally intended as touch-up solutions for hiding scratches.

Occasionally, people who intend to blue metal at home go to the trouble of learning how to rust blue, and this involves a certain level of skill and care, but is only minimally hazardous.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old March 28, 2013, 04:26 PM   #3
SerenityNetworks
Senior Member
 
Join Date: February 13, 2012
Location: Allen, TX
Posts: 416
Re: Home bluing

I'm not looking for anything fancy or perfect. This is a gun that will not be gently handled; it never has been and never will be. And I guess most importantly, I'm not willing to spend a lot on the project.

I wonder about products like "CERAKOTE OVENCURE CERAMIC COATINGS" or the "TEFLON/MOLY OVEN CURE, GUN FINISH" that I see at Brownell's? Although I'd need an alternative to blasting for getting the surface prepped.
SerenityNetworks is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05319 seconds with 8 queries