|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 11, 2013, 08:22 AM | #1 |
Junior Member
Join Date: March 10, 2013
Posts: 2
|
Remington 1100 bolt stuck open
New to this forum. I have a Remington 1100 that I have not used in years. Went to shot it over the weekend and the bolt is stuck open. When I push the silver tap on the carrier the assembly moves, put the bolt does not close. Any ideas would be great.
|
March 11, 2013, 06:00 PM | #2 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
Make sure it is not loaded. Pull The barrel. Pull the trigger group. Clean everything. If you don't have an owner's manual, download one and read it.
|
March 12, 2013, 09:40 AM | #3 |
Junior Member
Join Date: March 10, 2013
Posts: 2
|
thanks. Do have a link to the manual?
|
March 12, 2013, 10:15 AM | #4 |
Senior Member
Join Date: November 22, 2005
Posts: 185
|
here are a couple of links
http://www.shotgunworld.com/bbs/viewtopic.php?t=9744
http://www.remington.com/pages/news-...s-manuals.aspx Google "troubleshooting remington 1100" and you'll see many sources. Youtube has associated videos. It may as simple as gunk/grit/rust buildup in the trigger/bolt assembly. Good luck and let us know you make out. cheers! |
Thread Tools | Search this Thread |
|
|