January 14, 2000, 11:16 PM | #1 |
Member
Join Date: July 16, 1999
Posts: 28
|
Has anyone seen or heard of data for the 308 or 22-250 with this powder?
|
January 15, 2000, 07:32 AM | #2 |
Senior Member
Join Date: April 25, 1999
Posts: 189
|
The accurate arms website doesn't mention .308, but the data sheet that came with my last keg did. Unfortunately, I can't seem to locate it right now and, since I'm not using 2200 for .308, I didn't pay any attention to what they said about it. I'm sure if you called them, they'd give it to you over the phone.
|
January 15, 2000, 01:07 PM | #3 |
Senior Member
Join Date: April 25, 1999
Posts: 189
|
Ok, here's AA's load data for .308 from the newest AA2200 data sheet:
<BLOCKQUOTE><font size="1" face="Verdana, Arial">code:</font><HR><pre> 308 Winchester Test Gun Universal Receiver Barrel / Length H.S.P./24" Case / Primer REM CCI 200 Powder AA2200 Bullet Max. Charge Velocity Pressure O.A.L. HDY 150 SP 40.5 gr. 2735 f/s 46,800 c.u.p. 2.800" SRA 125 SP 43.0 gr. 3026 f/s 45,000 c.u.p. 2.670" SRA 125 SP 38.0 gr. 2720 f/s 36,900 c.u.p. 2.670" [/code] |
January 16, 2000, 12:19 AM | #4 |
Junior member
Join Date: November 7, 1999
Posts: 1,516
|
The .308 data is on their website, but it's not listed. You have to go to some of the c calibers around it and voila, it'll appear from nowhere.
|
May 6, 2005, 08:00 PM | #5 |
Junior Member
Join Date: May 6, 2005
Location: grants pass oregon
Posts: 1
|
data 2200 for 22-250
I have been using 2200 for quite a while now in 22-250 with pretty good success. Although the powder is quite temperature sensitive. Max load for a 40 gr blitzking is 34.5 gr. with a velocity of 4150 fps. As temperature rose we had to back down to 33 gr. with a vel of 3900 fps . Did not feel this filled the case full enough. So we went to varget. This powder works really well in my 6br. 30 gr of 2200 with 58 gr barnes vlc. is 3650 fps . with constant 1/2 " groups. Hope this helps you. Jim
|
Thread Tools | Search this Thread |
|
|