|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
October 3, 2012, 11:07 AM | #1 |
Senior Member
Join Date: May 22, 2009
Location: Washington State
Posts: 1,037
|
"M-4's in .308": Input Requested
Allow me to apologize in advance if I've missed any past threads - I've used the TFL Search function with no real success.
I'm looking at buying a .308 carbine that is essentially an M-4 in .308 caliber. Three that I've looked at have included DPMS, Rock River, and Bushmaster. Each of these appears below: http://www.dpmsinc.com/308-RECON_ep_93-1.html http://www.rockriverarms.com/index.c...714b3140586436 http://www.bushmaster.com/electronic...8%20Rifles.pdf While each of the manufacturers offers more than one carbine configuration, in general terms I'm looking for a 16" bbl, flat-top receiver, with a foregrip incorporating rails. Noveske doesn't appear to offer any .308 carbines similar to these, nor does Bravo Company or most of the other usual suspects. (If they do I couldn't find them on their websites.) I have experience with numerous 5.56mm AR rifles, and the Remington R-25 in .308, but no experience with any of the 16" .308s. I'm interested in input from folks on the forum who may know of any other manufacturers offering 16" (M-4 type) .308 carbines; and particularly those who already own them and have fired them. Are there any performance characteristics to these short .308s that would cause you to select one over another? Of the three listed, does anyone have any personal experience that would eliminate a manufacturer from consideration? Thanks again for any input, and I'm sorry if this topic has already been beaten to death! Doc
__________________
Treat everyone you meet with dignity and respect....but have a plan to kill them just in case. |
October 3, 2012, 11:53 AM | #2 |
Senior Member
Join Date: April 1, 2010
Location: Florida Gulf Coast
Posts: 721
|
I have a DPMS AP4 with the 16" barrel. DPMS sometimes gets ripped on the forums, but mine is a good shooter. It is accurate, with mild recoil, and has never failed me.
|
October 3, 2012, 01:53 PM | #3 |
Senior Member
Join Date: January 5, 2007
Location: DFW, Texas
Posts: 140
|
Colt 901 fits your description of what you're looking for.
I own a POF P-308 16.5" and it's amazingly accurate and stone cold reliable. Both of the above options use DPMS/KAC pattern 308 mags, ala Magpul. this is a big plus to me for reliability and price. Only downside to a 16" 308 is the sound level, LOUD!! Perhaps velocity loss also, but I've had my 16.5" out to 600 yards without issue. Last edited by RyeDaddy; October 3, 2012 at 01:59 PM. |
October 3, 2012, 02:19 PM | #4 |
Senior Member
Join Date: January 27, 2012
Posts: 1,078
|
What are you wanting to do with it?
Target shoot? Hunting? Personal defense/duty rifle? I have shot a DPMS in .308, 1 round. The extractor froze and wouldn't eject the case. The bolt wasn't machined correctly. It was exchanged for a new bolt and then it was fine according to my brother. He sold it right after that. I have 100 or so rounds out of a Larue PredatAR in .308 with a 18" bbl. Both suppressed and unsuppressed. Not a single bobble.
__________________
I am no longer participating in gun forums. Good luck. |
October 3, 2012, 02:39 PM | #5 |
Senior Member
Join Date: July 30, 2010
Posts: 857
|
Les Baer Mid-Length Monolith .308 with a 16-inch barrel. JP Rifles LRP-07 with a 16-inch barrel. Knights Armament SR-25 with a 16-inch barrel. LMT .308 Modular Weapons System with a 16-inch barrel. LaRue Tactical makes several .308's with 16-inch barrels.
Then there is always the FN SCAR 17S with a 16.5-inch barrel. Not an "M-4" configuration, but is a .308 with front rails. |
October 3, 2012, 02:55 PM | #6 | |
Senior Member
Join Date: March 18, 1999
Location: Nogales, AZ USA
Posts: 4,001
|
Check out the Colt SP901.
Quote:
__________________
God gave you a soul. Your parents, a body. Your country, a rifle. Keep all of them clean. |
|
October 3, 2012, 04:31 PM | #7 | |
Senior Member
Join Date: July 17, 2011
Location: NJ
Posts: 595
|
Quote:
|
|
October 3, 2012, 04:51 PM | #8 |
Senior Member
Join Date: May 22, 2009
Location: Washington State
Posts: 1,037
|
Thank you gentlemen, that is exactly the sort of input I was looking for.
(Special thanks to RyeDaddy and Destructo6 for the smack upside the head over the Colt 901. For some reason I'd gotten the idea that the Colt 901 came out with a 20" bbl rather than the 16.1" bbl.) Crow Hunter, the intended use is a personal defense/duty weapon. buckhorn_cortez, I appreciate the list of other manufacturers. I now have my work cut out for me to start researching the other options! By the way, I've no familiarity with the FN SCAR 17S. Do any of you guys have some anecdotal information about these rifles? Thanks guys.
__________________
Treat everyone you meet with dignity and respect....but have a plan to kill them just in case. |
October 3, 2012, 05:13 PM | #9 | |
Senior Member
Join Date: January 5, 2007
Location: DFW, Texas
Posts: 140
|
Quote:
|
|
October 3, 2012, 08:11 PM | #10 |
Senior Member
Join Date: September 9, 2000
Location: San Antonio, TX
Posts: 2,194
|
LaRue Predatar 16
http://www.laruetactical.com/16%E2%8...l-predatar-762 KAC SR25 carbine http://www.knightarmco.com/sr25.html LMT MWS http://www.lmtstore.com/complete-wea...on-system.html |
October 3, 2012, 09:03 PM | #11 |
Senior Member
Join Date: July 30, 2010
Posts: 857
|
I own a Les Baer .308 sniper. it is, without a doubt, the most accurate rifle I've shot and that includes my custom 30-338. That being said - it weighs a lot - nearly 14 lbs with the scope. It is NOT a field rifle, although you can shoot precision tactical rifle competition with it.
The SCAR 17 is a field rifle. If you want a rifle that is accurate, but you can carry in the field all day - that would be the semi-auto rifle I would choose in .308. I've shot them and they work really well. |
October 3, 2012, 10:47 PM | #12 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
alright well there's a couple issues with an M4 in 308.
1. the M4 is an AR15 type rifle while you need an AR10 type platform to chamber 308. 2. the M4 has a 14.5 inch barrel making it an SBR so none of those factory rifles come with the proper barrel length and you need to file some spendy paperwork with the ATF to make it such. 3. M4 is a select fire assault rifle, all AR15s and AR10s for civilian use are semi auto only, sporting rifles unless properly licensed and registered with the ATF. now that the technicalities are out of the way. DPMS, remington and Bushmaster rifles are all the exact same so if I were to pick one of those three I would get the DPMS and save myself $500 on the name stamped on the side. rock river arms is a good company and I would pick one up in a flash if I could get a good deal on them but being Obama Scare 2012, prices on everything is outrageous. availability on all of those are iffy most of the time at best, my bother has been looking for a DMPS ar10 for about 16 months and none of the LGS here can seem to get them in. DPMS stopped taking orders for a while on certain models (probably while the same factory was cranking them out with bushmaster and remington stamps instead) so I would say go ahead and get on a waiting list for a RRA, you might get it before they are outlawed.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
October 4, 2012, 12:42 AM | #13 |
Member
Join Date: May 26, 2011
Posts: 57
|
" mine is a good shooter. It is accurate, with mild recoil, and has never failed me"-cmdc
Same here ImageUploadedByTapatalk1349329255.942492.jpg |
October 4, 2012, 07:13 AM | #14 | |
Senior Member
Join Date: January 27, 2012
Posts: 1,078
|
Quote:
For a "duty grade" .308 AR type you are going to have to spend north of $2,000. LMT, SCAR and KAC are the only ones that have ever actually been used in combat, if that is important to you. (It would be for me for a "duty grade" rifle) I have held a LMT. (Actually it was ordered for me but I decided I didn't want it) It was VERY heavy. I am currently babysitting a SCAR 17 and I have fired it quite a bit. If it is something you are planning on carrying around, I would choose the SCAR 17 over any of the AR versions that I have handled or shot. My reasoning is it is combat tested, and it is quite a bit lighter than even it's closest competitor. The Larue PredatAR (one of the lightest AR .308 variants) that I am also baby sitting is a little bit heavier and quite a bit more nose heavy. However, it is signficantly easier to shoot and more accurate than the SCAR.
__________________
I am no longer participating in gun forums. Good luck. |
|
October 4, 2012, 07:20 AM | #15 |
Member
Join Date: October 2, 2012
Posts: 58
|
i have the dpms ar-10 and i love it, it takes all mags unlike the aramlite and it was around the 800 range.
|
October 4, 2012, 07:26 AM | #16 |
Senior Member
Join Date: June 10, 2007
Location: Decatur, GA
Posts: 269
|
I agree with your choice of Rock River as I own and hunt with an LAR-8 A4. The Elite Operator is slightly more expensive but I presume is just as accurate as the LAR-8. The Bushmaster is more expensive for the same quality, so I'd go with Rock River.
__________________
A Colt Python's trigger pull is as smooth, beautiful and artistic as a Sidewinder sliding on the desert floor. It is concepts like this that the anti-gunners can never comprehend and why we fight so hard to keep them. NRA Benefactor Life member |
October 4, 2012, 07:27 AM | #17 |
Member
Join Date: October 2, 2012
Posts: 58
|
i have the dpms ar-10 and i love it, it takes all mags unlike the aramlite and it was around the 800 range.
|
October 4, 2012, 07:44 AM | #18 | |
Senior Member
Join Date: April 23, 2007
Location: Red Rock. TX
Posts: 820
|
Quote:
Oh, DPMS does not make an AR-10; it makes a 308 AR-style rifle, but only Armalite makes the "AR-10"...and they have the lawyers to prove it. Anyway, I have a DPMS, although it is a 20". No problems that were not of my doing (knocking loose the gas block on a prop during a match). If money is no object, then LaRue PredatAR or OBR depending on weight tolerance and features. On a budget, DPMS is fine, but be sure it has a trigger upgrade - I have no good things to say about the stock DPMS trigger. |
|
October 4, 2012, 10:40 AM | #19 |
Senior Member
Join Date: May 22, 2009
Location: Washington State
Posts: 1,037
|
The LaRue option(s) certainly appear to fit the bill nicely. They also appear to be top shelf product, with prices at or above $3K for the models I'd be interested in.
The Les Bauer rifles looked super accurate, but even in their spec lists they appeared heavy relative to the other options. There were other options, including Hogan Arms, that offered a more ideal platform at the same price. http://www.hoganguns.com/firearms/firearms.html Unfortunately, while I'd like to say "price is no object" that isn't the case. I've got to weigh price against other factors and select something that will meet the need, not necessarily the most ideal option. (Like the government, going with the lowest bidder! ) Thanks for all the comments and recommendations, I appreciate the benefit of your various experiences and insight into the different platforms. It makes the decision less of a crap shoot, considering that its unlikely I'll have much of a chance to shoot many of these before making a decision.
__________________
Treat everyone you meet with dignity and respect....but have a plan to kill them just in case. |
October 4, 2012, 08:18 PM | #20 | |
Senior Member
Join Date: July 17, 2011
Location: NJ
Posts: 595
|
Quote:
|
|
October 4, 2012, 10:06 PM | #21 |
Senior Member
Join Date: December 20, 2009
Location: Texas Gulf Coast
Posts: 728
|
As I understand it, the Colt SP901 comes with a 20 inch barrel. The Colt LE901 comes with either a 16.1 inch barrel or a 13 inch barrel. I have not seen a SP model but I do own a the LE 16 inch model. No mention is made in the owner's manual of the LE model being able to accept 5.56 uppers, The Colt uses 20 round pmags, which can be had for around $20. The SCAR magazines I have seen are going for around $90-$100 each.
|
October 5, 2012, 07:35 AM | #22 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Quote:
ArmaLite has the AR-10 16" carbine available in both SR-25 and M14 pattern magazines. The pre ban M14 mags are legal in ban states. The best bang for the OP's buck well be the ArmaLite AR-10A (SR-25) A4 carbine. http://www.armalite.com/ItemForm.asp...3-83959df8252d Forged upper and lower unlike some others, chrome lined barrel, C158 bolt, under $1500 street price. |
|
October 5, 2012, 01:57 PM | #23 |
Member
Join Date: August 1, 2011
Posts: 25
|
I prefer having a rifle buffer vs the carbine. They do a better job of reducing recoil due to the size and weight difference. Just my .02 YMMV
|
October 6, 2012, 06:59 PM | #24 |
Senior Member
Join Date: June 24, 2002
Posts: 589
|
If I can find a Colt 901, I plan on selling off most of my other rifles.
|
October 6, 2012, 07:07 PM | #25 |
Senior Member
Join Date: January 27, 2012
Posts: 1,078
|
__________________
I am no longer participating in gun forums. Good luck. |
|
|