|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 5, 2001, 06:14 PM | #1 |
Member
Join Date: December 29, 2000
Posts: 68
|
Mossberg 152 K Barrel and disassembly
Well, I have a Mossberg 152K .22lr rifle that has a split barrel. I think I have found a source for a barrel, but if anyone has one I would appreciate knowing about it for possible purchase.
But my real need is: How is the barrel attached to the receiver in the 152K? Does anyone have a diagram? It should be the same as the 152 if you happen to have one of those. I believe the only difference between the 152 and the 152K was the type of sight. Thanks
__________________
"Pain is temporary, victory is forever" |
August 7, 2001, 11:51 PM | #2 |
Senior Member
Join Date: October 5, 2000
Location: Lawrence, KS
Posts: 576
|
As a question, How in the dickens did you split the barrel?
The reason I ask is that the 152 that I am looking at has one thick walled barrel. |
August 8, 2001, 03:30 AM | #3 |
Member
Join Date: December 29, 2000
Posts: 68
|
I didn't personally split the barrel, and the person who did never actually fessed up to it, so I don't know exactly how it split.
But, it almost looks like there was a squib in the barrel when another round (or more) was sent on its way. If you are holding the rifle in an aim position, then the split is about 6 inches down the barrel at about 2 o'clock. There is a bulge at the site of the split that extends around the barrel. I found a barrel, but since I have not heard from anyone on how to replace the barrel, I will have to ask my local smith if he can do it for me. The replacement barrel needs to be blued anyway, so I will have everything re-blued at the same time since I need a smith to rebarrel it.
__________________
"Pain is temporary, victory is forever" |
|
|