The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old November 6, 2011, 09:19 PM   #1
Teggy89
Junior Member
 
Join Date: November 6, 2011
Posts: 2
Need an opinion on this Spanish FR8

Hello, I'm from Australia and after reading a very good article about the Spanish FR8's I've been keeping an eye in gun shops, post boards and used guns sites. I really really want one...

Finally I came across a guy in northern queensland selling one for $800 AUS, it's too far for me to go and inspect it personally.

Description says "Small marks to stock, bore bright, paint still on safety. I have bent the bolt handle down"

I'll post photos of it, I just need an opinion if it's worth buying and having it refurbished or wait around till something remarkable comes up.
Attached Images
File Type: jpg DSCN2257.jpg (232.7 KB, 113 views)
File Type: jpg DSCN2258.jpg (224.8 KB, 84 views)
File Type: jpg DSCN2259.jpg (234.2 KB, 78 views)
Teggy89 is offline  
Old November 6, 2011, 09:21 PM   #2
Teggy89
Junior Member
 
Join Date: November 6, 2011
Posts: 2
last two photos
Attached Images
File Type: jpg DSCN2260.jpg (235.1 KB, 64 views)
File Type: jpg DSCN2261.jpg (220.0 KB, 49 views)
Teggy89 is offline  
Old November 6, 2011, 11:32 PM   #3
Asgardnz
Member
 
Join Date: November 4, 2011
Location: New Zealand
Posts: 35
I would be a little concerned about the bending of the bolt and whether it was done professionally. Gunsmiths have special blocks to clamp the bolt. Check out Brownells website(http://www.brownells.com/.aspx/lid=1...r-Bolt-Handles). The price seems high to me, but then I'm in New Zealand and FR8's used to sell for a lot less here....... I've just checked and there is a FR8 for sale here with bayonet for $800NZ so maybe the price is right.
Asgardnz is offline  
Old November 7, 2011, 08:26 AM   #4
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,832
Don't know about down under, but in the US that would be double the going rate, especially for one that has been bubbad.
__________________
I used to love being able to hit hard at 1000 yards. As I get older I find hitting a mini ram at 200 yards with the 22 oddly more satisfying.
mapsjanhere is offline  
Old November 11, 2011, 09:12 PM   #5
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Location: About 20 nm from the Big Muddy
Posts: 2,884
The guy basically killed much of the value when he decided to bend the bolt.

If it is does not match the action, then the value was already reduced quite a bit, even before he 'bent' the bolt.

Such "bubba'd" guns remind me of the classic GI vintage M-1 Carbine in the rack at Whittaker's (n.w. KY) about two years ago.
Some previous nit wit owner had painted the gun green.
Ignition Override is offline  
Old November 15, 2011, 08:07 PM   #6
Rick W.
Member
 
Join Date: November 13, 2011
Location: Yakima, Washington
Posts: 19
That reminds me of my 7x57mm, 1895 Mauser, 1916 Spanish Model, short rifle. The only differances I could see was that you have the top handguard and different sights. I had the roller coaster, adjustable rear sight for 2000 meters installed on top of the barrel just in front of the receiver ring and the barleycorn front sight. I don't know if this helps you or not, but I paid $100.00(American) 5 years ago and just sold it last year for the same price.
Rick W. is offline  
Old November 15, 2011, 08:08 PM   #7
Rick W.
Member
 
Join Date: November 13, 2011
Location: Yakima, Washington
Posts: 19
By the way, it also had the bent bolt handle too
Rick W. is offline  
Old November 20, 2011, 04:56 PM   #8
JiminTexas
Senior Member
 
Join Date: August 25, 2010
Posts: 149
The FR-8 was a transitional gun manufactured by Spanish armories using the CETME front ends and Spanish Mauser actions. There were several problems in the manufacture of the CETME actions and the government found themselves way behind on the schedule to get the CETME in production. They had a boatload of CETME front ends which were much easier to produce than the semi-auto actions and several warehouses full of 1895 Mausers so they came up with the FR-7 and a little later the FR-8 variation. They were manufactured to use a slightly reduced power 7.62 NATO round because the Mauser 7x57 action wasn't certified for use with the full power NATO round chamber pressures. I don't personally know of anyone that has blown up an FR-8 using full house Nato loadings, but....... 800 AUS seems to me to be WAAAAY over priced. Check out the usual suspects, Gunbroker and auction Arms, on line and you can pick one up for about $300 U.S. Getting it into the country may be a problem though.
JiminTexas is offline  
Old November 20, 2011, 07:44 PM   #9
HankC1
Senior Member
 
Join Date: April 4, 2005
Location: Ohio
Posts: 531
Quote:
I don't personally know of anyone that has blown up an FR-8 using full house Nato loadings
FR-8 are converted from large ring mausers and have no problem to handle commercial 308 and even magnum calibers. You probably were thinking FR7 which is small ring.
HankC1 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.08429 seconds with 11 queries