October 29, 2001, 01:37 PM | #1 |
Senior Member
Join Date: January 17, 2001
Location: LA - KY (Cajun Hillbilly)
Posts: 338
|
Encore 209 X 50
I finally got me one this weekend in the SS/Syn variant and fired it yesterday with 150 grains of Pyrodex and some Barnes 250 gr sabots.
What's the best accuracy anyone has gotten out of theirs with a certain sabot and load? What size of scopes do you guys have on yours (if you have any at all)? Can you get the barrel for the 209 X 45 somewhere and what's the take on that one? |
November 3, 2001, 11:18 PM | #2 |
Member
Join Date: July 27, 2000
Location: Quantico, Va.
Posts: 36
|
209X50 load.
I tried a bunch of loads and finally settled on one suggested by TC:
2 pellets and a TC Mag Express Sabot with 240 (250?) grain Hornady XTP. These are sold under the TC name. I can find them at Wal Mart. My gun and two friend's guns all shoot this load about 1.5-2" groups at 100 yards. We each took a white-tail with this load last year. All good results, with large exit wounds. The load gives about 18.5-22" penetration in ballistic gelatin at 50 yards. Hope this helps. |
November 5, 2001, 02:54 PM | #3 |
Senior Member
Join Date: January 17, 2001
Location: LA - KY (Cajun Hillbilly)
Posts: 338
|
I always heard that the 150gr loads are not as accurate as the 100 gr...interesting. I have tons of 250 gr Barnes sabot so I will shot them up and then try some others. Buford do you have a scope on yours?
|
November 5, 2001, 07:12 PM | #4 |
Senior Member
Join Date: February 13, 2000
Posts: 122
|
Mine likes 2 pellets and 300grXTP's.
For the 209/45, try Fox Ridge Outfitters. They are the custom shop outlet. Lots of new calibers and such. MFH |
November 6, 2001, 01:34 PM | #5 |
Senior Member
Join Date: January 17, 2001
Location: LA - KY (Cajun Hillbilly)
Posts: 338
|
Thanks MFH, I already looked there on their website and saw nothing. I may try calling. I will probably try some wildcats out of this gun also because my dealer told me he can get new barrels for about $200
|
November 6, 2001, 04:39 PM | #6 |
Member
Join Date: July 27, 2000
Location: Quantico, Va.
Posts: 36
|
209X50
Yes, I have a scope on mine. I purchased a Tasco from Midway. I picked it because it has Mil Dots and I can run a trajectory chart and use the dots for holdoff. I also picked it because I didn't have enough money to purchase a Leupold and have mildots installed.
I think the Tasco cost $69.00. Although I don't like it as much as a Leupold, I am very happy with what I got for $69.00. Sorry it took me so long to answer. I have not been able to check the board for a couple of days. Good luck!!! |
Thread Tools | Search this Thread |
|
|