The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old June 24, 2011, 11:08 PM   #1
Newton24b
Junior member
 
Join Date: February 10, 2009
Posts: 974
rechambering a revolver

heres the thing that bugs me

i have seen online loads for cast lead that use a .360-.362 diameter lead bullet in 380 acp

i have seen far too many load data that say use .358 or .359 diameter lead bullet in a 38 sw.
i see lead data for 38 special that uses a .359 diameter bullet.

so please tell me why a gunsmith would say "its impossible to shoot 38 sw in a 38 special barrel"
Newton24b is offline  
Old June 24, 2011, 11:12 PM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
It's not impossible to shoot it if you can get it to chamber. The 38 S&W case dimension is larger than max 38 Special dimensions. But just because you can get it in there doesn't mean it's a good idea to pull the trigger. Besides, 38 Special ammo is cheaper tham 38 S&W ammo.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old June 24, 2011, 11:47 PM   #3
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
Hi. The .38 S&W uses a .360" jacketed bullet and a .361" cast. Neither of which are easy to find.
The .380 ACP uses a .355" bullet and a .356" cast, but never a .360" bullet. The .38 Special uses a .357" jacketed bullet and a .358" cast bullet.
Like Scorch says, the .38 S&W is 7 thou larger in diameter than the .38 Special.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old June 25, 2011, 08:26 PM   #4
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
I think a statement like "it is impossible to shoot a .38 S&W in a .38 Special" is based on the diameter of the case, not the diameter of the bullet. Even then, the statement is not true. I once checked and about half of my .38 Special revolvers would accept .38 S&W cartridges. The reason is that the cartridge and chamber tolerances of the two rounds overlap.

As to the bullets and barrel diameter, the usual statements are simply not valid any more, if they ever were. I just miked a bullet pulled from a Winchester .38 S&W round, bought a year or so ago. It mikes .356". Yes, folks, that is .356", not .360" or .361" or .365" or .380".

Further, I once slugged the barrels of an S&W Victory Model .38 S&W, a Webley Mk IV, and an Enfield Revolver No.2. Guess what? .357"-.358". (Did S&W actually make barrels for the .38 S&W or just mark them that way to match the chambering?)

My conclusion is that the cartridge case diameter in many cases doesn't matter, and that the supposed bullet difference just doesn't matter at all.

Jim
James K is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03703 seconds with 10 queries