December 31, 2012, 07:32 AM | #1 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
primers ?
I have read somewhere that a small rifle primer can also be used as a small pistol primer, is this true ?
also wanted to ask if when loading some 38 loads in 357 cases, would you use a standard primer or a magnum primer ? |
December 31, 2012, 09:12 AM | #2 |
Senior Member
Join Date: February 15, 2009
Posts: 8,927
|
Rifle primers have harder cups than pistol ones. Many pistols will not fire a rifle primer because of this.
Pistol magnum primers should not be used in .38 Special loads; only full power loads in pistol magnum cases. |
December 31, 2012, 09:42 AM | #3 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
I reload for a +P rated 38 SPL revolver, so I don't mind using magnum primers. I was reloading for 357 Mag and 38 Spl so it was easier to just keep one type of small pistol primer on hand, and I settled on magnum primers.
I no longer have a 357 Mag, and I just used the last of my SPM primers, so I'm considering seeing how CCI 400's do in 38 Spl loads since I have a brick of those laying around. Magnum primers are not needed for standard pistol loads, but nor will they cause any problems if you do the load workup to ensure that your load is safe in your firearm. Jimro
__________________
Machine guns are awesome until you have to carry one. |
December 31, 2012, 01:09 PM | #4 |
Senior Member
Join Date: April 23, 2006
Location: South Texas
Posts: 2,010
|
I have been using small rifle primers in all of my small primer pistols for the past 7-8 years. On this board I have heard about trouble igniting them but I have not experienced it myself in 8 different pistols and 4 revolvers. I don't have any lightened springs though.
|
December 31, 2012, 01:29 PM | #5 |
Senior Member
Join Date: June 30, 2009
Location: dallas
Posts: 773
|
This was discussed a lot during the 2008 shortage, learned that a lot of the competitive shooters use small rifle in their 9mm loads. I guess the best clue would be to look at some of your brass, if you are getting a nice deep dimple then they should be okay, but I still wouldn't load up a bunch til trying them out. Bottom line, if done correctly and safely they should work fine. Having an alternative will be nice as it looks like we are going into another shortage cycle so its kind of like shoot what you can get.
|
December 31, 2012, 01:59 PM | #6 |
Senior Member
Join Date: August 27, 2011
Location: western Iowa
Posts: 205
|
I'm a cautious sort
I would not use loads worked up for .38 special in .357 brass, the case has a larger volume. I'd look instead for .357 "pussycat" loads and use the powder and primer specified.
|
December 31, 2012, 02:11 PM | #7 |
Senior Member
Join Date: March 31, 2010
Location: Communist State of IL.
Posts: 1,562
|
I have been using SRP in pistol loads for a few years but, I have run into issues lately with FTF. I have tried some SRM primers and had little success with the pistols I have FTF 95% of the time.
If you have issues using SRP's you can use a extra power hammer or striker spring to help with light primer strikes.
__________________
NRA Life Member, SAF Member |
December 31, 2012, 02:29 PM | #8 |
Senior Member
Join Date: October 26, 2012
Location: Texas
Posts: 259
|
I'd just use small pistol primers. They're the same price and I know they'll work.
Just my .02 Ike Sent from my C771 using Tapatalk 2 |
December 31, 2012, 02:53 PM | #9 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
I was curious if that was true or not. I was thinking about maybe using some srp for spp in case I run out during the shortage.
|
December 31, 2012, 03:07 PM | #10 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
Dimensionally they will work, whether or not they work well in your firearm is a "give it a shot and see" sort of deal.
Jimro
__________________
Machine guns are awesome until you have to carry one. |
December 31, 2012, 04:35 PM | #11 |
Senior Member
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,930
|
I have been loading small pistol loads with small rifle primers for 3 years. Over 25 thousand loaded, and fired. .38 special/.357 mag. .45 Auto (a few hundred, shoot them where I know I will not be able to pick them back up.) tons of 9mm. None of my loads are anywhere near the maximum. All were worked up from starting loads.
I started with them due to the fact that they were all I could find, and get. None have failed to fire, in any of the guns I have used them in. I still use them to keep things simple. I was using them for rifle loads before I started loading for any pistol rounds. Since they worked I just buy more small rifle primers.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you. |
December 31, 2012, 04:55 PM | #12 |
Member
Join Date: November 3, 2012
Location: State of Jefferson
Posts: 95
|
I didn't see an answer to the mag or standard primer question so I'll say unless you are using very slow powders like h110, 296, IMR4227 or the likes, I recommend std small pistol primers.
|
December 31, 2012, 07:25 PM | #13 |
Senior Member
Join Date: May 29, 2011
Location: Fort Worth
Posts: 500
|
I just looked on Powder Valley. There are no SRP in stock either.
__________________
Education teaches you the rules, experience teaches you the exceptions (Plagiarized from Claude Clay) |
|
|