October 27, 2001, 06:37 PM | #1 |
Senior Member
Join Date: February 7, 1999
Location: TN. USA
Posts: 607
|
Case trimming and lube
When I trim my cases (Lyman power universal trimmer) they sometimes stick on the pilot and are hard to pull back off. Would there be any harm in spraying case lube (RCBS Case Slick) on the pilot?
I can't think of a down side so if there is one let me know. |
October 27, 2001, 08:21 PM | #2 |
Senior Member
Join Date: October 26, 2000
Location: Maryland
Posts: 267
|
if you dont get it all outof the case it will make the powder not go BANG
__________________
e-mail: [email protected] |
October 28, 2001, 07:36 AM | #3 |
Senior Member
Join Date: October 6, 2001
Location: S.W. Michigan
Posts: 560
|
You can use a spray case lube by Hornady. It does not affect primer or powder. If you consider how rifle cases are resized, you have to lube the inside of the neck anyway. Spray lube is all I use. I put a light coating down each side and hit the inside of the necks for resizing. This coating is still there when I trim.
|
October 28, 2001, 08:07 AM | #4 |
Senior Member
Join Date: February 7, 1999
Location: TN. USA
Posts: 607
|
Dogjaw, thanks, I'll try that. I have been cleaning the lube off after resizing. Next time I'll wait until after trimming.
__________________
MOLON LABE! I've joined the 300. |
Thread Tools | Search this Thread |
|
|