The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools Search this Thread
Old May 4, 2013, 01:06 AM   #1
ChaseReynolds
Senior Member
 
Join Date: March 29, 2012
Location: Fort Riley, Kansas
Posts: 186
.45 Colt lever action rifle

I would like to purchase a lever gun in .45 Colt, I have looked at Henry and Winchester and would like to know what everyone had and what they would suggest and why. Thanks.
ChaseReynolds is offline  
Old May 4, 2013, 05:16 AM   #2
springfield 720
Member
 
Join Date: November 17, 2012
Location: Minn
Posts: 60
both are very nice.. and very accurate.. It would depend if you like shiny brass ( like me ) or case colored receivers...Marlin also makes a good rifle in .45 lc..
springfield 720 is offline  
Old May 4, 2013, 06:37 AM   #3
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
If you go with a Winchester get a model 92. The 94 action was designed for a rifle cartridge and most don't work well with pistol length cartridges.
Hawg is offline  
Old May 4, 2013, 06:38 AM   #4
the Black Spot
Senior Member
 
Join Date: September 9, 2009
Location: arkansas
Posts: 218
I have shot the rossi and marlin both nice fit and finish better on marlin
the Black Spot is offline  
Old May 4, 2013, 07:41 AM   #5
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
Have Rossi and Henry

Have shot the Rossi but not the Henry yet.

Henry is a .357. The quality appears higher than the Rossi. But at 200.00 more money, it should be.
__________________
Seek truth. Relax. Take a breath.
Doc Hoy is offline  
Old May 4, 2013, 11:31 AM   #6
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
.
I own a Marlin 1894 & a few Rossi Model 92's.

I would suggest a Rossi M92 if you want to use a peep sight; a Marlin 1894 if you need a scope (It's easier to mount a scope on).

The Marlin is easier to take down for cleaning than any Model 92, but the M92 takedown isn't beyond most folk's, who have a half-way decent mechanical aptitude.

I wouldn't suggest a Winchester Model 94 in a short (pistol) cartridge, due to the work-arounds viv-a-vis the lifter, etc, that Winchester used to make them feed, which sometimes go South.

The various Italian-sourced Model 92's have more "bling" than a Rossi, but are also twice the price.


.
PetahW is offline  
Old May 4, 2013, 05:29 PM   #7
towboat-er
Senior Member
 
Join Date: December 2, 2011
Posts: 146

Last edited by towboat-er; May 5, 2013 at 08:09 AM.
towboat-er is offline  
Old May 4, 2013, 06:51 PM   #8
ChaseReynolds
Senior Member
 
Join Date: March 29, 2012
Location: Fort Riley, Kansas
Posts: 186
I need something not as long as normal, mostly for comfort due to my T-Rex arms. I don't understand why you guys are referring to .45 colt like they have the round for pistol and rifle. I want the rifle so I will have ammo compatibility with my wheel gun
ChaseReynolds is offline  
Old May 4, 2013, 06:58 PM   #9
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
Quote:
Originally Posted by ChaseReynolds

I don't understand why you guys are referring to .45 colt like they have the round for pistol and rifle.
Regardless of matter how it's loaded, or what type firearm it's loaded in, the .45 Colt is classified as a pistol cartridge.

What was referred to was the chambering of a "pistol" cartridge in a longer action (like the Win 94) that was designed around a longer "rifle-length" cartridge.


.
PetahW is offline  
Old May 4, 2013, 07:05 PM   #10
ChaseReynolds
Senior Member
 
Join Date: March 29, 2012
Location: Fort Riley, Kansas
Posts: 186
Okay I see, so the action wasn't changed any when they added calibers to a weapon platform.
ChaseReynolds is offline  
Old May 4, 2013, 07:16 PM   #11
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
Just changes to handle a particular cartridge like lifters, extractors, etc. The 94 was designed around 30-30 length cartridges and the lifter is really long to handle a stubby little .45 Colt.

The .45 Colt was introduced for the Colt SAA in 1873. It wasn't chambered in a rifle until the 1980's.

Last edited by Hawg; May 4, 2013 at 07:22 PM.
Hawg is offline  
Old May 4, 2013, 09:32 PM   #12
Andy Griffith
Senior Member
 
Join Date: May 14, 2009
Location: Macon Co. NC
Posts: 591
What they are trying to say is, that the 94 Winchester action is a bit on the clunky side once they re-engineered it for the shorter, revolver length cartridges. It works, but it isn't ideal.

I don't think it's easily possible to pick up a 94 Winchester of recent manufacture for a reasonable price, or what I would call one.

I'd defintely take a look at some of Uberti's offerings. If you want short, a round barreled 1873 carbine might fit the bill. Also, I have a couple of Rossi 1892's in .357 that l adore. The 1892's will be the lightest of the bunch, especially with 16" or 20" round barrels. The Henry is ok, but from the one I handled, it was very, very heavy for it's size, and I didn't care for the tube style loading (like a .22 rimfire).

It's all in what you like though. Be certain the handle them all a lot before deciding- it may suprise you that you may change your mind on the short vs. long barrel preference, depnding upon what you want to do with it.
__________________
Barney Fife: "Nip it, nip it, nip it!"
Andy Griffith:"Oh now Barn'...."
Andy Griffith is offline  
Old May 10, 2013, 11:51 PM   #13
rodent.22
Senior Member
 
Join Date: January 9, 2010
Location: virginia woods
Posts: 129
I've got a '94 in .45 Colt. A very good shooter. It cycles great if you are brisk. Dilly dally and it will slip a round into the action.
__________________
NRA, VCDL, USAF 1970-76 6200FMS CLARK FIELD,P.I.'71-'72- 18 SOS, NKP, THAILAND '72, BASE FLIGHT,KEESLER AFB,MISS '72-'74, CARSWELL AFB,TX '74-'76
rodent.22 is offline  
Old May 12, 2013, 08:35 AM   #14
springfield 720
Member
 
Join Date: November 17, 2012
Location: Minn
Posts: 60
Marlin 94 is very light and short.. receiver is designed to take the pistol rounds and is fed through the receiver side gate and ejects out the side. They too, are on the spendy side, but very nice.. I have a .357 with a 20" barrel and shoot the heck out of it..

springfield 720 is offline  
Old May 12, 2013, 09:23 AM   #15
arch308
Senior Member
 
Join Date: November 6, 2011
Location: DFW, Texas
Posts: 876
I've got a Rossi M92 that I like alot 'tho I don't shoot it much. It is a beautiful gun but the action could use a little work. Or I could just shoot it more. It is however an accurate rifle and will knock heck out of a deer. I occasionally hunt with it when still hunting in thick mesquite flats and use my hot RBH loads.
arch308 is offline  
Old May 12, 2013, 04:23 PM   #16
gus3836
Member
 
Join Date: November 13, 2007
Posts: 84
45 colt

I have a Henry replica type 45 not the new Henry Rifle. It is agreat shooter I also had a 73 in 45 Colt both great rifles. If you are going to shoot BP in them not so much to much residue builds up after 25 rounds or so. Not designed for Bp that is why they never made the rifle in 45 in the old days. The marlin and 92 are stronger actions so if you are going to load heavy those would be the actions to get. My two cents. Gus
__________________
What if the Hokey-Pokey really is what it's all about!
gus3836 is offline  
Old May 12, 2013, 04:44 PM   #17
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
The real reason there was no .45 rifle is the rims on the original balloon head cases were too small for an extractor to grip and the copper cases were prone to tearing.
Hawg is offline  
Old May 12, 2013, 09:46 PM   #18
44 Dave
Senior Member
 
Join Date: February 24, 2013
Posts: 583
The "King's patent" Rules out the Henry clone for me.
I would go with the '66 or '73 easy to disassemble and clean, can be short stroked, just not much to go wrong with them.
44 Dave is offline  
Old May 13, 2013, 07:56 PM   #19
Jbar4Ranch
Senior Member
 
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,719
Yep, no rim. Here's an original .45 Colt from my collection.

__________________
Sometimes the squeaky wheel gets replaced...

SASS 47015
Jbar4Ranch is offline  
Old May 13, 2013, 08:20 PM   #20
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
Hawg is pretty close to correct. The reason the .45 Colt was not used in rifles is because of the tiny rim, not because of the balloon head case, which was a matter of internal case construction. The rim was not large enough to ensure extraction in a rifle. The fact is that things have not improved much because the .45 Colt still has a small rim and still has extraction/ejection problems in rifles. The .44-40 is a much better choice in rifles and is fully equivalent in power.

The tiny rim of the .45 Colt came about because Colt wanted to keep as much of the old .44 percussion tooling as they could when they went to the SAA. The Army wanted .45 caliber, and the only way to put a .45 into a cylinder sized for .44 was to reduce the rim as much as possible. Of course, in the SAA, the rim had to be only large enough for case support. Extraction didn't depend on the rim since the SAA has a rod ejector.

Jim
James K is offline  
Old May 14, 2013, 07:31 PM   #21
44 Dave
Senior Member
 
Join Date: February 24, 2013
Posts: 583
Jbar4Ranch is the primer internal on that original .45 or is that a .44 rimfire?
44 Dave is offline  
Old May 14, 2013, 07:39 PM   #22
TennJed
Senior Member
 
Join Date: September 26, 2010
Posts: 1,536
.45 Colt lever action rifle

I would like a 45 colt lever to accompany my Ruger Vaquero and Redhawk in 45 colt. Those will occasionally see some very stout "Ruger only" loads. Which lever actions can and can not handle "Ruger only"?
TennJed is offline  
Old May 14, 2013, 07:57 PM   #23
Jbar4Ranch
Senior Member
 
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,719
Quote:
Originally Posted by 44 Dave
Jbar4Ranch is the primer internal on that original .45 or is that a .44 rimfire?
It's internal (Benet primed), as evidenced by the crimp holding the primer in the case.
__________________
Sometimes the squeaky wheel gets replaced...

SASS 47015
Jbar4Ranch is offline  
Old May 14, 2013, 08:18 PM   #24
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
Quote:
I would like a 45 colt lever to accompany my Ruger Vaquero and Redhawk in 45 colt. Those will occasionally see some very stout "Ruger only" loads. Which lever actions can and can not handle "Ruger only"?
The Rossi 92 can handle them. I wouldn't try it in a 66 or 73 with toggle link actions.
Hawg is offline  
Old May 14, 2013, 08:56 PM   #25
Jbar4Ranch
Senior Member
 
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,719
Marlin too.
__________________
Sometimes the squeaky wheel gets replaced...

SASS 47015
Jbar4Ranch is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.29610 seconds with 10 queries