January 7, 2009, 02:44 PM | #1 |
Senior Member
Join Date: February 4, 2007
Location: Oklahoma
Posts: 416
|
A-5 20ga mag extractor
Sadsack: Have you been able to come up with a photo of how the extractor sits in the barrell? Got the part, now I need to get it in and test it. Anyone else have a pic?
|
January 7, 2009, 05:13 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
20 ga mag extractor is attached to the bolt, the ejector is attached to the barrel extension with a small rivet, but is not tight and slides back and forth in a T-slot so it can move far enough rearward to eject the 3" 20 ga shells.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
January 8, 2009, 12:15 AM | #3 |
Senior Member
Join Date: February 4, 2007
Location: Oklahoma
Posts: 416
|
Sorry, meant ejector.
|
January 15, 2009, 05:54 PM | #4 |
Senior Member
Join Date: February 4, 2006
Posts: 206
|
Vostracker: Sorry about not sending pictures. I had already returned the A-5 I had in the shop. I fell and busted my leg and kind of forgot about sending you the information.
You will need to order the rivet that Scorch mentioned as well as the spring and spring retainer if they are missing. Last edited by sadsack; January 15, 2009 at 05:59 PM. Reason: left off last sentence |
January 15, 2009, 08:18 PM | #5 |
Senior Member
Join Date: February 4, 2007
Location: Oklahoma
Posts: 416
|
Broke?
Sadsack: Thanks for thinking of me. I picked up what I needed from MGW and got her replaced and working good. Sorry to hear about the leg. Hope all is going well and get well soon.
|
Thread Tools | Search this Thread |
|
|