The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old October 16, 2015, 07:35 AM   #1
John Deere 4320
Junior Member
 
Join Date: October 15, 2015
Posts: 1
Reloading .243

I just bought a Ruger precision rifle in .243 win. It has a 1-7.7 twist I was wondering what would be a good load for it I have 105 gr. Berger match bullets for it. Any help would greatly be appreciated thanks.
John Deere 4320 is offline  
Old October 16, 2015, 07:45 AM   #2
MarkCO
Senior Member
 
Join Date: October 21, 1998
Location: Colorado, USA
Posts: 4,296
I will PM you my address and it will take me about a year to work up a good load for you.

Bergers should be a good start, but not many have played with the RPRs yet. I have 107 grain Nosler Custom Competition and SMKs waiting in the wings. H4350 will be my baseline and I will try some of the other powders that have given good results with the heavier bullets in .243 Win.
__________________
Good Shooting, MarkCO
www.CarbonArms.us
MarkCO is offline  
Old October 16, 2015, 08:43 AM   #3
Hunter Customs
Senior Member
 
Join Date: March 26, 2005
Location: Osborn, Missouri
Posts: 2,697
I had the hots for one in 243 caliber but that's kind of died out a little now, I sure like the design and features they offer a shooter.

I already have a heavy barrel 243 that's very accurate and fills the need I have for a longer range rifle and at my age I'm not sure I want to buy another rifle.

That being said I would be very interested in how well your rifle shoots when you work up your loads.

In my heavy barrel 243 I'm shooting a compressed charge of IMR 4831 topped off with Nosler's 95 gr Ballistic tip bullets.
Hunter Customs is offline  
Old October 17, 2015, 12:01 AM   #4
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 28,677
moving to Reloading forum
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Old October 17, 2015, 12:14 PM   #5
Roadkill2228
Senior Member
 
Join Date: March 8, 2014
Location: Nipawin, Saskatchewan
Posts: 311
Nosler has load data for 105s freely available online. Hornady shows load data for 105 bthps in their manuals. Rl22, rl19, imr7828, h4831, Should be good picks. H4831 is an "extreme powder" meaning that it is supposedly less temp sensitive than other powders. For precision long range shooting that matters. Any of the 105s should be good choices. Hornadys 105 bthp is the cheapest of the bunch as best I can tell and has a bc of .530 which is great. Running it at the 3000 fps which is possible, your supersonic to around or over 1400 yards. That's comparable to many .300 win mag match loads with minimal recoil. The .223 and .308 can't touch this kind of performance.
Roadkill2228 is offline  
Old October 17, 2015, 12:50 PM   #6
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
You absolutely MUST work up the load for your rifle though.
Have a look here. http://www.6mmbr.com/243Win.html
Been using IMR4350 for Speer 105 grain hunting bullets for eons. Match bullets would be wasted in my rifle. Isn't up to 'em.
"...at my age..." You need toys at any age. Older guys just have better toys. snicker.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old October 17, 2015, 01:34 PM   #7
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,582
I used RL22 those 105's.
A 1:7" twisted barrel will shoot good with 115 grain Bergers also so check them out....
__________________
Keep your Axe sharp and your powder dry.
hooligan1 is offline  
Old October 18, 2015, 01:01 PM   #8
std7mag
Senior Member
 
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
I'm trying out the new Reloder 26 with Hornady 105 Match bullets, and Fed 210M primers out of Remington casings.

Hopefully all works out...
std7mag is offline  
Old October 18, 2015, 03:13 PM   #9
Hunter Customs
Senior Member
 
Join Date: March 26, 2005
Location: Osborn, Missouri
Posts: 2,697
Quote:
"...at my age..." You need toys at any age. Older guys just have better toys. snicker.
True, but my wife and I are kicking around the ideal of selling our place in a couple of years and purchasing an RV to travel around the country.

If that takes place, I'll be very limited on guns and ammo I can take along for the ride.

If that Ruger Precision Rifle had came about 10 years back I would have already owned one.
Hunter Customs is offline  
Old October 18, 2015, 08:37 PM   #10
William T. Watts
Senior Member
 
Join Date: January 20, 2010
Location: Central Arkansas
Posts: 1,074
IMR7828 was my go to powder for 243Win with 100 gr Nosler solid base lead tip bullet, without a doubt this push feed model 70 Winchester was the most accurate rifle I've ever owned!! William

Last edited by William T. Watts; October 21, 2015 at 08:00 PM.
William T. Watts is offline  
Old October 19, 2015, 07:02 AM   #11
Sure Shot Mc Gee
Senior Member
 
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
What's a good load for the 243? Depends what you intend to shoot. I've always believed the faster a small bullet is the better. Personally I don't like the 100 gr bullet and above section period. My preference has been the 24 cal 75-80 gr. bullets for the past 40 years. Fast & flat shooting. Big difference in a bullets performance when traveling down range at near or above 3400 fps verses hobbling along at 2900 to 3000 fps.
I've personally observed on more than one occasion deer shot with 75 gr. will walk no more than 25 ft when rib shot no matter its size & weight. Can't say the same about 105 gr.
Before I determined what bullet weight worked best for me. I had to experience the tracking of a couple big deer being rib shot with 105 gainers at close range well into the night to recover. Both deer left nice blood trails but brush slapping me in the face during their recovery made the effort a little more than just annoying.

Probably like you I was told too by a few co-worker fellows supposedly in the know and the 22 year old gun counter sales person. "105s are the best for taking deer."
It took me a couple years to come to the conclusion for my application they sure as heck weren't.

The biggest deer I've taken with my Ruger 77 {Flat Top} 243 loaded & lock with 75 grainer's. One of that rifles many deer harvested was a 10 pt. Buck shot at 80 yards and weighed 242 lbs field dressed. As I recall the Buck toppled over not more than 20 ft from where it was shot. Bullet entered thru its ribs nicking the top of the animals heart and also totally destroying its lungs. All with out leaving a exit hole. Reason for the animals quick demise. Most 24 cal 75-80 gr bullets will when loaded with heavier powder weights typically disintegrate within the animals body cavity thus dumping its entire energy factor then & there. I have no want or need to see a exit hole in the animals I shoot. Typically a second or (exit) hole is preferred by those hunters who expect to track their animal. Thus wanting that additional bullet exit hole for their wounded animals bleed out I think. Nope not me. I prefer a entrance hole only. "Brown is Down" is what I want to see from my deer stand. And too. When it comes to paper targets. It pleases me to see my rifle put its 5 rounds grouped into a nickle size hole at 100 yards time after time while bench-rested.

IMR 4831 is the powder for 75-80s. Hornady's 75 gr. HP with its long narrow profile I've found to be the best preforming on deer and targeting both. {Which is quite similar to your Berger's in look but not the price.}
My overall advice: Experiment with different bullet weights & brands. See which one is the most accurate shot out of your rifle. Don't take for granted what others including myself say are the best weight & brand for "you're" use. Discover that piece of reality on your own.
Sure Shot Mc Gee is offline  
Old October 19, 2015, 03:16 PM   #12
briandg
Senior Member
 
Join Date: May 4, 2010
Posts: 5,468
4350imr is the best I ever used. It's a favorite for a huge number of people. Switching to other powders in experiments failed. I got best results with a nosler 75(I think) match hp.
briandg is offline  
Old October 20, 2015, 10:10 AM   #13
schmellba99
Senior Member
 
Join Date: January 8, 2008
Posts: 803
My .243 loves H414 (40.5 grains) with a 95 gr Combined Technologies BST loaded to .003" off the lands. But it's a hunting rifle, not a long range shooting gun like yours is. I'm also near the max weight the barrel twist will allow. Pretty sure I could go up to the 100 grain bullets if I had any desire to, but I've never felt the need to do so as the performance of my bullet selection on this load has proven to be excellent.
schmellba99 is offline  
Old October 20, 2015, 10:26 AM   #14
MarkCO
Senior Member
 
Join Date: October 21, 1998
Location: Colorado, USA
Posts: 4,296
I too shoot 75 to 95 grain for game in my .243s. But the RPR is a faster twist and I assumed that the OP was interested in target loads, not game loads.
__________________
Good Shooting, MarkCO
www.CarbonArms.us
MarkCO is offline  
Old October 20, 2015, 11:15 AM   #15
mxsailor803
Senior Member
 
Join Date: February 8, 2010
Location: SC
Posts: 1,344
I've had good luck with Sierra ProHunter 100gr with 4064. It may not be the "best" combo but it has put a number of deer in the freezer. I've never really been a fan of trying to make a screaming .243 just because of barrel wear. With that said, we need to see pictures of your new toy, especially since I want the .243 version.
mxsailor803 is offline  
Old October 20, 2015, 01:32 PM   #16
briandg
Senior Member
 
Join Date: May 4, 2010
Posts: 5,468
3,000fps is doable. And reasonable to achieve. As. Far as I an concerned, with this round, it's far more relevant to get an accurate load with a genuine high performance bullet, th a to worry about 75 vs95 or 95 vs100. I've used a lot of bullets in it, and not really found one that can't get good accuracy. The basis on the .308 cartridge is very good.

All things considered, for deer purpose, it's nearly perfect. It's a 250+ yard capable round. Proper Ammo makes it capable of moa or better, and choice of bullets makes it capable of one shot kills.

The precision rifle is a good match for it. That rifle can go to a stand and reliably kill. An 06 based round,25 on up will be a better choice, but the 6mms can be made into precise rifles that can kill even with a less than optimal hit.
briandg is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.08939 seconds with 10 queries