|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 14, 2015, 01:12 AM | #26 |
Senior Member
Join Date: December 2, 2007
Location: Missouri
Posts: 8,306
|
I have a question for those who say there are better choices than good ole Hoppe's. How?
When I clean my guns with Hoppe's #9 they end up........well,.......clean! So how much more clean, than clean do the newer products get a gun?
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING! |
January 14, 2015, 02:14 AM | #27 | |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,392
|
Quote:
Hoppes #9 takes longer, takes more elbow grease, and takes more applications. And, in the end, the parts in question are only half as clean (if that), as they are with less effort and less solvent when using a competing product. (In my experience.) Hoppes #9 smells great... but I don't consider it to be worth a crap, any more. The remaining Hoppes that I have on hand is used to dilute other oils when I soak a rag to re-oil the bluing on my firearms, or to treat freshly-blued parts. It's a bit like toilet paper versus baby wipes. Toilet paper gets your butt clean. But once you try baby wipes to 'finish', you learn that there's a whole new level of clean. My brothers have a similar concept for rating the effectiveness of cartridges/loads on varmints. When shooting prairie dogs, there's dead, which is just dead; deader, which might include evisceration and flying chunks; and then there's better dead, which indicates "red mist" and that you might spend half an hour searching, just trying to find an ear or toe. Everything still ends up dead, but better dead is definitely better than just dead.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
|
January 14, 2015, 02:18 AM | #28 | ||
Senior Member
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
|
Quote:
Quote:
For my part, given the OP subject, I will go there tomorrow and pick up whichever of the M-pro and Elite is cheapest, seeing as they seem hard to tell apart in performance.
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic. Freedom: Please enjoy responsibly.
|
||
January 14, 2015, 08:18 AM | #29 |
Senior Member
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
|
I bought:
- Ballistol 200ml - Hoppes Elite Bore Gel 100ml - Hoppe's Dri-Lube 200ml (just in case) We'll see how it goes. The others on sale were all cleaner/lubricants or oils and I wanted a dedicated cleaner that wasn't a foam. Thanks for the pointers!
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic. Freedom: Please enjoy responsibly.
|
January 14, 2015, 12:03 PM | #30 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,013
|
I haven't tried the gel. Let us know how it goes.
Cheapshooter, Go back to my previous post #21 and follow the link to the article on the Boretech product. It's a magazine article on testing cleaners, and includes describing a range session in which a fellow was sure his gun was clean, too, until he looked with the borescope. If you don't have access to a borescope, you may be unaware of what was all is being left in there, too. Getting it out can reduce group sizes.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
January 14, 2015, 02:55 PM | #31 |
Senior Member
Join Date: April 18, 2014
Location: North Carolina
Posts: 2,320
|
I use Hoppe's 9 and Hoppe's Gun Oil religiously. I use it to clean and lubricate all my guns. It cleans corrosive ammo as well. I would just order a quart of it online. It's got a pretty small spout of it so it's easy to put on patches and brushes.
__________________
Proud owner of three (four-ish) pieces of history! K-31, Mosin-Nagant M91/30, M24/47 Mauser, Norinco SKS. "You might as well appeal against a thunderstorm..." William Tecumseh Sherman |
January 15, 2015, 04:25 PM | #32 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,013
|
The OP can't just order a quart on line; he's in Estonia. That's why he limited the choices at the start of his post to what the stores there can import.
The Hoppe's Elite and the Boretech products I mentioned are water-based, so they dissolve the corrosion-causing potassium chloride (combustion product of potassium chlorate) from corrosive primers even better than Hoppe's No.9 can. They dissolve copper and eventually even lead by chelation, leaving the dissolved waste non-toxic, despite the metals in it. The Boretech corrosion inhibitors are so effective you can let their products dry out in the bore and still have remaining humidity protection. I assume Elite has something similar. And the borescope doesn't lie about what cleans most effectively. I know No.9 is an old favorite, but it was introduced in 1903, and, believe it or not, 112 years is enough for chemistry to have made an advancement or two. Hoppe's claim that Elite cuts the cleaning time by 80% sounds plausible if you don't count time letting the solvent sit and work. Boretech Eliminator makes that kind of difference if you use it correctly. Check out the article I linked to.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
January 15, 2015, 05:35 PM | #33 | |
Senior Member
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
|
Quote:
In any case, the Hoppe's #9 still has about 20ml left in it and that bottle has lasted me about two years, so I doubt I'll be moving on to the Elite before the spring. All the same, once I do and if the results are evident, I will certainly report it!
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic. Freedom: Please enjoy responsibly.
|
|
January 15, 2015, 06:39 PM | #34 |
Senior Member
Join Date: July 9, 2004
Posts: 5,172
|
+1 for Ed's Red. UncleNick has the recipe in Post #21.
Buy a quart of each ingredient (diesel fuel works fine as a substitute for kerosene) and mix it up a bit at a time, as required. Four ounces of each will produce a pint of CLP, and that should last a while. And you have enough for seven more pints of mixture. |
January 16, 2015, 08:11 AM | #35 | |
Member
Join Date: July 3, 2013
Location: Atascocita, TX
Posts: 78
|
Quote:
{No hotlinking to copyrighted material is allowed on this board unless you get express permission from the source and provide and provide an attribution explaining they have given it to you.. Please see http://thefiringline.com/forums/announcement.php?a=94} As for Hoppe's #9, the new definitely isn't as good as the old. I've noticed the difference, and while it gets powder/carbon out okay, it can't touch the copper. So I bought some Hoppe's Benchrest, and am pleased with it. It's pretty much the old stuff, with a slightly different smell haha.
__________________
-Nathan- Remington 1911R1 .45ACP ~ Remington 870 Express SuperMag 12G ~ Smith & Wesson 629 Classic DX .44 Mag ~ Parker-Hale Model 1200 .30-06 CMP M1 Garand Special .30-06 ~ Tula '39 Mosin-Nagant M91/30 7.62x54R ~ Romanian M1969 Trainer .22LR Last edited by Unclenick; January 23, 2015 at 05:08 PM. |
|
January 23, 2015, 04:22 PM | #36 |
Junior Member
Join Date: January 21, 2015
Location: N Atlanta suburbs
Posts: 7
|
I use whatever bore cleaner I have on hand down the bore and in the chamber.
But for trigger assemblies, and all the little parts in the action, I use brake cleaner. Blast it clean. No problems. I let it dry and mop off any residual carbon with a rag, then apply a thin coat of rem lube on everything. $3 for a big can. Haven't had any problems so far... |
January 24, 2015, 11:57 AM | #37 |
Senior Member
Join Date: February 17, 2006
Location: Northeast of Houston, Tx
Posts: 393
|
FWIW, Have used the MP7 pro for a couple of years now....a very decent bore cleaner. Also like the Shooters Choice Aqua Clean a lot. Both of these do a good job dealing with copper.
A few months ago, came home from a LGS with a bottle of Hoppes synthetic bore cleaner....a Hoppes product I'd not seen before. Showed the bottle to a sales clerk in the store, asked him about it. Clerks in this large store have been there for years, very experienced and knowledgeable guys. Clerk looked at the bottle, commented, "I've never seen this, must have just got it in stock." What was odd to both of us was lack of info on the bottle as to what it was good for....removing copper, powder fouling/carbon and etc. Just said it was a superior bore cleaner and no listing of its ingrediants, just said it was synthetic. Anyway, after using it several months now on a number of different rifle bores, the Synthetic Hoppes had worked pretty good for me. Cost several dollars more than Hoppes #9 and does have some of the #9 aroma. |
January 27, 2015, 08:00 AM | #38 |
Senior Member
Join Date: April 4, 2012
Location: South Jersey
Posts: 2,217
|
Just found this thread. I have used most of the products at one time or another.
But I have found that Gunzilla works pretty well for cleaning and maintaining. It doesnt seem to do that well with severe copper fouling. I also use the Break Free Powder blast and find that it works quite well. Nice citrus scent masks all the toxic chemicals im sure it contains. I have had the Powder Blast soften and take the sheen off of a remington 7400 stock that may have been back yard refinished. I dont let any cleaner stay in contact with rubber grips like the packmayer on my Kimber. If someone has tried Gunzilla and found a better product Ill try it.
__________________
Concentrated power is not rendered harmless by the good intentions of those who create it. Milton Freidman "If you find yourself in a fair fight,,, Your tactics suck"- Unknown |
January 29, 2015, 11:43 AM | #39 |
Senior Member
Join Date: January 4, 2007
Location: pelican lake, WI
Posts: 413
|
I've been using Hoppes #9 for 50+ years, love the smell of it. Seems to take me back in time. Started using it by cleaning guns for a gunsmith in the back of his shop at 13years old. Use it to clean the powder fowling and then use Sweets or Shooter Choice for copper fowling, followed by another wipe down with Hoppes #9. I buy it by the quart. I also use an Otters Fowl Out electrolysis system for copper fowling removal. But having read this, I'm going to try Boretech Elliminator.
|
March 12, 2015, 10:35 AM | #40 |
Senior Member
Join Date: January 4, 2007
Location: pelican lake, WI
Posts: 413
|
I read the link in post #21 then ordered some Slip Carbon Killer and Bore Tech Eliminator. I must say the two work very well together. I've always used Hoppes #9 and Shooter Choice to clean my barrels. I've cleaned six of my rifles that I thought had clean bores, to my surprise, they were not. The Carbon Killer really got the carbon and crud out allowing the Bore tech to remove the copper with less work than I ever used before. I used only nylon brushes and patches and the Bore Tech removed more copper fowling from cleaned barrels than I believed possible. The Carbon Killer contains no petroleum or solvent products, but it cleaned better than another carbon or lead bore cleaner that I have ever used. My deer rifle is an old Win Model 100 in .308. I completely disassemble and clean the entire gun before each deer season and after the deer season, after firing maybe two to three shots. One or two to fowl the barrel and one for the deer. So this gun is clean, at least I thought. The Carbon Killer still removed carbon to the point where the nylon brush and last patch squeaked as I pushed it through the barrel. The Bore Tech containing no ammonia still removed copper fowling from this clean barrel. The same with my Arisaka in 6.5X57 Mauser. Re-barrel two years ago and always cleaned after firing. Maybe 150 rounds through the barrel. After cleaning with Carbon Killer and then the initial Bore Tech the patches were so blue I was stocked. Got another 15 or 20 rifles to go.
|
March 12, 2015, 02:52 PM | #41 |
Senior Member
Join Date: April 7, 2006
Posts: 10,963
|
First- we use ferric chloride to etch knife blades. Don't put it any where near a gun barrel. It very actively attacks steel!
The 1911 channel guy is a complete idiot. He runs his mouth, but has no idea what he's talking about. After all his "scientific" tests, he never tells you the end result. Pay no attention to the man behind the curtain! He's a complete buffoon. "Gold leaf" isn't used on firearms, it's used on signs and fire truck lettering. There are no gun solvents that will destroy gold. He's so wrong on most counts that is pitiful! And I have an arsenal in my vault-really. Last edited by Bill DeShivs; March 12, 2015 at 03:23 PM. |
March 12, 2015, 04:08 PM | #42 | |
Senior Member
Join Date: October 28, 2006
Location: South Central Michigan...near
Posts: 6,501
|
Quote:
|
|
March 15, 2015, 10:05 PM | #43 |
Senior Member
Join Date: May 15, 2011
Location: Southern York County, PA
Posts: 145
|
Just use Ballistol. In my opinion there is nothing quite like it. I think it cleans and protects better than most non-abrassives out there.
Like a well seasoned cast iron pan or skillet. With prolonged use, on anything really, carbon deposits and most everything else will wipe away with ease. That is until you can find your Hoppes. I'd want it too.
__________________
Combat Commander |
Thread Tools | Search this Thread |
|
|