April 16, 2011, 06:26 AM | #76 |
Senior Member
Join Date: March 20, 2009
Location: Lowcountry
Posts: 373
|
The problem as I see it is this:
Companies creating new calibers has become an epidemic in the gun industry. The companies all know guns are durable goods and that 38 special from 1940 is either still alive and kickin or can be repaired to do so. This is a serious problem to their longevity as a company especially when times get tough and people start dipping into the collection for some gas money. When a good used gun can be bought for a fraction of the price of a new and arguably inferior quality product, companies going under becomes a reality. The solution, convince the public that what has worked for generations is no longer up to snuff and in doing so stabilize their position in the market for just a bit longer. They do this by reinventing the wheel and creating the 32-20, oops I mean the 327 Federal Magnum. It is obvious that even though the companies place huge amounts of dollars on marketing they really dont believe their new fangled thing will catch on and that is why they have limited runs and low production while continuing to produce the very items they are damning in high numbers. I dont think even the biggest idiot would actually believe the 327 is as powerful as the 357 Magnum. It is laughable. Ok then, you get 6 shots. Well OK, that IS something but it is pretty weak too. Some have stated a lever carbine would be good for the 327. I see more utility here than in a personal defense revolver. With defensive revolvers the 38 makes more sense since cheaper practice is attainable and practice is the most important aspect of defensive shooting not cartridge.
__________________
I say take off the warning labels and let them sort themselves out. |
April 16, 2011, 05:04 PM | #77 | |
Senior Member
Join Date: January 24, 2011
Posts: 1,427
|
Quote:
The next problem is that too many people think that carrying any caliber that doesn't start with a 4 is a waste of time. Last problem still seems to be ammo availabilty and pricing. Anything 32 seems to be overpriced. |
|
April 16, 2011, 05:48 PM | #78 |
Member
Join Date: May 29, 2007
Location: Washington State, U.S.A.
Posts: 27
|
Jus wondering: Is there any real world data of there regarding the effectiveness of the .327 magnum as a SD round?
|
April 16, 2011, 07:30 PM | #79 |
Senior Member
Join Date: June 16, 2005
Location: AZ
Posts: 3,113
|
I doubt it. It's basically brand new.
About the best you could do is look up something similar. For example, what other caliber fires a 115 grain bullet at 1300 fps? What other caliber fires an 85 grain bullet around 1400 fps? Hmm... |
April 16, 2011, 08:16 PM | #80 |
Senior Member
Join Date: August 4, 2010
Posts: 820
|
Think about it, the 327 is only 3 hundredths of an inch smaller than 357 and going just as fast with a bullet of almost the same weight. Doesn't seem like a huge difference to me. Arguing over differences in paper ballistics is a waste of time.
|
April 16, 2011, 09:08 PM | #81 |
Senior Member
Join Date: January 11, 2011
Posts: 374
|
Nothing went wrong
The 327 is geting more an more popular....My gun stores all stock a ton of ammo for it
AND for the guy who said a 9mm is good enough over the 327...Dude if you shot a 327 fed mag full house load you seriously would not even compare a 9mm+p to it at all |
April 16, 2011, 10:06 PM | #82 |
Senior Member
Join Date: June 4, 2001
Location: Iowa
Posts: 261
|
To be honest, from a reloader's standpoint, I don't know of any cartridge that gives more bang for the buck than the .327. My biggest concern has been components. Since it's a revolver, I also don't have to chase brass around like I do with the .45 or (worse yet) the 9mm.
I always regretted not buying an SP101 in .32 mag, so this was a "must buy" for me. I just hope it doesn't fade completely into the sunset. |
April 16, 2011, 11:19 PM | #83 | ||
Senior Member
Join Date: June 6, 1999
Location: El Paso, TX
Posts: 1,021
|
Quote:
Quote:
|
||
April 16, 2011, 11:39 PM | #84 |
Senior Member
Join Date: June 4, 2001
Location: Iowa
Posts: 261
|
Brass is the most expensive component of any reloaded ammo, and accumulating brass from anything other than purchasing new ammo can be difficult for any reloader, unless your looking at the typical service rounds such as 9mm, .45 acp, .40 S&W or .357.
In any case, straight walled revolver ammo brass has a longer service life, due to the fact that minimally charged reloads are possible, and brass can last almost indefinitely. Add brass loss due to indiscriminate satellite bound ejection by the autos, the only real competitor is the .357. Current component availability really shouldn't limit a weapon purchase anyway. The void will be filled in the marketplace sooner or later. Over time, lower powder costs, and the fact that I can cast more .32 bullets from a pound of wheel weights than I can the 36 caliber, (.38/357) and my savings are realized over 8 to 10 reloads. |
April 17, 2011, 12:14 AM | #85 |
Senior Member
Join Date: September 18, 2008
Posts: 100
|
This thread has gone and done it. All day long I've been thinking about a Ruger Blackhawk in .327 Federal Mag. I already have too many guns I want. Well, what is one more.
|
April 17, 2011, 01:46 AM | #86 |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
I have NO first hand experience with the .327, BUT, from what I have read about it, it is an ideal compromise for shooters of small stature who need a relatively small, light weight handgun for defense but can't handle the recoil of the .357 in such a handgun. The ballistics seem to be fairly inpressive, making it ideal, for example, for women and senior citizens who can't handle either a larger firearm, or the excessive recoil of the .357 fired from a small revolver such as a Ladysmith.
|
April 17, 2011, 01:55 AM | #87 |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
Deleted. Wrong information.
Last edited by gyvel; April 17, 2011 at 02:48 AM. |
April 17, 2011, 02:52 AM | #88 |
Junior member
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,172
|
You guys are so hung up over the fact that a cartridge has to do something better than another one.
No cartridge needs to do anyhting more than be fun for someone to justify it's existence. WildhencethecartridgeinquestionAlaska ™©2002-2011 |
April 17, 2011, 03:34 AM | #89 | |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
|
Quote:
I picked up a bulk lot of once-fired .327 Federal (Nickel Plated) brass, as well as two other reloaders on these forums (500 pieces, or more, for each reloader). I paid more than I wanted to, but still less than half the cost of "reasonably priced" new, unfired brass. (When Federal announced the availability of component brass, the price was far from reasonable. ...but that doesn't matter. They pulled the plug, when the demand for loaded ammo was greater than they expected.) I don't care what other shooters think of the .327 Federal. I now own more bullets and cases to feed a single .327 Blackhawk, than all of my other firearms, combined. (except for 9mm luger - for the simple reason that I have more than 8,000 range pick-up cases on hand.) It is THAT much fun, and THAT easy to reload for. -And that fun to reload for. (Yea. I'm odd. I actually enjoy reloading, and the .327 makes it even more enjoyable.) Picking up the .327 is one of the best firearms decisions I (and my wife) have ever made.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
|
April 17, 2011, 03:39 AM | #90 |
Senior Member
Join Date: November 28, 2007
Posts: 302
|
I wish Hi Point would make a .327 mag.
|
April 17, 2011, 06:37 AM | #91 | |
Senior Member
Join Date: February 27, 2011
Location: Dutchess County, NY
Posts: 450
|
Quote:
Looking at data from Federal the .327 runs about 10%-20% less energy than the .357 depending on the round selected. Brass supply is going to be a problem. There are far fewer choices for bullets. All that being said, it would probably be a great round in something like the LCR or Airweight if you could fit six rounds at the current weight and width or go to five rounds in a slightly thinner and lighter package. At same # of rounds and size/ weight I would stay with the .357 |
|
April 17, 2011, 07:52 AM | #92 |
Senior Member
Join Date: March 18, 2008
Posts: 642
|
327 Magnum
I have an SP101 in 327.
I don't shoot 32S&W or S&W Long to avoid a carbon ring that could raise the pressure on an already high pressure round. 32 H&R Magnum has almost the same length so I shoot it sometimes. The 327 gives serious ballistic performance with little felt recoil in the SP101,making a followup shot that much easier.It's also acurate and flat shooting. I like to think of it as a modernized version of the32-20. that round had legs for a long time. |
April 17, 2011, 10:15 AM | #93 | |
Senior Member
Join Date: February 20, 2008
Location: Kansas
Posts: 416
|
Quote:
I can't wait to be able to afford to shoot one!! Untill then, 9mm it is ... sigh. Guess that's telling in its self |
|
April 17, 2011, 11:38 AM | #94 | |
Senior Member
Join Date: December 28, 2006
Posts: 4,342
|
My feelings are the .327 will go the way of the .41 mag and the .401 Powermag. Kinda a cult cartridge with loyal followers. Was the time not right for these cartridges or was is marketing? No one will ever know, but altho they are all viable platforms, they never have been accepted by the masses.
Quote:
|
|
April 17, 2011, 08:51 PM | #95 |
Senior Member
Join Date: March 4, 2011
Location: Frisco, TX
Posts: 330
|
The .327 is selling very well here in DFW area...I dont know how it will do on a bad guy....but it kills hogs dead as a hammer! These two hogs I've killed at lease this spring Boar at 27yds and sow at 21yds! This one is a Charter Arms with CT laser.
|
April 17, 2011, 08:57 PM | #96 | |
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
Quote:
|
|
April 17, 2011, 09:12 PM | #97 |
Senior Member
Join Date: January 6, 2008
Location: Northeast Colorado
Posts: 1,993
|
Held one in my grimey little mitts!
At the local gunshop there is a brand new SP101 327 mag--3.06 barrel. Wow! nice little gun!
So, the wife said to go ahead if I wanted to get one. Came home and started figuring out the details of making ammo--and it took some doing. The dies are commonly dies for the 32 H&R mag. Ok, those are available. RCBS 3 die set is about $20 higher than 357 mag. Oh well. OK. 32 caliber bullets are fairly easy to get. Several to pick from. OK. Load data is rather limited, but available. OK. Brass. Look look look....huh? The brass is a bigger problem. Not expensive, just darn hard to locate. I found some, but that begs the question: If this caiber is going to survive, there needs to be components for reloaders. Not a scavanger hunt, not a game of luck, just there on the shelf. I lived through that panic induced shortage of components a couple of years ago, and there is not much that can upset me more than not finding components for loading when I need the stuff. Much as it hurts to say it, I will pass on this one. |
April 17, 2011, 09:26 PM | #98 |
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
I'll pass on the 327 too. I see it as sort of a niche gun for a cop. Impressive ballistics and the extra round is good for them but it does nothing but cost more for us civilian types. I'm so wrapped up in 44 specials and magnums that I never even bought a 357 yet!
|
April 18, 2011, 01:50 AM | #99 |
Senior Member
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678
|
Some old straight wall cartridges get made a little longer and get registered at a higher pressure.
They made a mistake with the 32 H&R mag, in that it failed to take advantage of how high the pressure could be and still not get stuck cases. To exploit that margin, the case had to be lengthened and the pressure upped a second time to the 327 Fed Mag. Revolvers with a 6 at once extractor can get stuck cases at ~~ 40,000 psi, depending on the thickness of the steel chamber wall: http://groups.google.com/group/rec.g...02ce69fa01e631 38 special [17kpsi]-> 357 mag [35kpsi] 44 special [15.5kpsi]-> 44 mag [36kpsi] 45 Colt [14kpsi]-> 454 Casull [65kpsi] 32 S&W long [15kpsi]-> 32 H&R mag [21kcup] -> 327 Fed Mag [45kpsi] What does it all mean? Nothing went wrong with the 327F. What went wrong was the 32 H&R wimpiness that caused the 327F to be created to fix it.
__________________
The word 'forum" does not mean "not criticizing books." "Ad hominem fallacy" is not the same as point by point criticism of books. If you bought the book, and believe it all, it may FEEL like an ad hominem attack, but you might strive to accept other points of view may exist. Are we a nation of competing ideas, or a nation of forced conformity of thought? |
April 18, 2011, 01:56 AM | #100 | |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
Quote:
I sure as heck think that a .375 can bring down a kodiak a hell of a lot better than a .22 lr. |
|
Thread Tools | Search this Thread |
|
|