January 30, 2013, 05:13 PM | #1 |
Member
Join Date: October 16, 2012
Location: Oxford, Mississippi
Posts: 33
|
Best cold bluing solution
I'm going to re-blue a revolver frame and cylinder. What are you guys suggestions as far as the best cold bluing solution? There are so many choices and so many conflicting customer reviews.
|
January 30, 2013, 05:46 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Don't. If the gun needs to be reblued, take it to someone who does hot caustic bluing.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
January 30, 2013, 05:54 PM | #3 |
Senior Member
Join Date: January 7, 2010
Location: Houston, TX
Posts: 802
|
Having watched and American Gunsmithing Instute video on refinishing I agree with Scorch.
If you have to ask, you don't have the tools and knowledge (neither do I) that are necessary for the job. I've learned that if it isn't done right it'll cost you a lot more later to undo the mess created by cheap solutions.
__________________
"Socialized Medicine is the Keystone to the Arch of the Socialist State.” -Vladimir Lenin "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them." - Thomas Jefferson (An early warning to Obama care) |
January 30, 2013, 06:09 PM | #4 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Brownells Oxpho-Blue. http://www.brownells.com/gunsmith-to...-prod1072.aspx
|
January 30, 2013, 06:21 PM | #5 |
Member
Join Date: October 16, 2012
Location: Oxford, Mississippi
Posts: 33
|
This is not an expensive pistol and this is intended to be more of a learning process than anything. I have done some browning that came out very nice using Birchwood Casey Plum Brown.
|
January 30, 2013, 06:26 PM | #6 |
Member
Join Date: October 16, 2012
Location: Oxford, Mississippi
Posts: 33
|
Oxpho blue was what I was thinking about using. Also considering dricopan? And 44/40. Just not sure if there are big differences between different brands. I imagine they all use varieties of the same chemical process.
|
January 30, 2013, 06:43 PM | #7 |
Senior Member
Join Date: September 6, 2012
Location: Lakewood, CO
Posts: 1,057
|
I wish I had pictures of it when i first did it, a GP-100 completely re-blued with 44/40, because i didn't have any $$ at the time. It was my first blue job, the revolver saw lots of carry in the woods in some pretty rough weather.
The bluing holds oil quite well, and has been durable. The most important thing in any bluing process is the metal prep IMO.
__________________
NRA Lifetime Member Since 1999 "I ask, sir, what is the militia? It is the whole people except for a few public officials." George Mason |
January 30, 2013, 06:47 PM | #8 |
Member
Join Date: October 16, 2012
Location: Oxford, Mississippi
Posts: 33
|
That is a good looking finish. Do you remember how many coats you had to use? If I can get a finish that good ill be happy. Mine will be on a Pietta 1851 repro.
|
January 30, 2013, 06:49 PM | #9 | |
Senior Member
Join Date: April 16, 2011
Location: Georgia
Posts: 1,599
|
Quote:
I have seen some fine looking guns that have been done by "noobs"...although, they did their homework before starting. I have just never been able to get the nerve to try it. |
|
January 30, 2013, 07:03 PM | #10 | |
Senior Member
Join Date: September 6, 2012
Location: Lakewood, CO
Posts: 1,057
|
Quote:
I can't seem to lay my hands on a bottle of 44/40 right now, but I think it is supposed to cure under a coat of oil when you finish.
__________________
NRA Lifetime Member Since 1999 "I ask, sir, what is the militia? It is the whole people except for a few public officials." George Mason |
|
January 30, 2013, 08:18 PM | #11 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,486
|
The local shop is actually doing some whole gun bluing with Oxpho Blue when it is too much trouble to fire up the tanks or wait out the rusting process.
It looks very good. I have not used anything done with it enough to see how it wears, but have hopes. The Brownells bluing instruction manual, available in PDF from their site, goes into detail on how to do it. It is NOT just a swipe it on process as you would touch up a worn spot. |
January 30, 2013, 08:21 PM | #12 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
FWIW, I have used G96 Gun Blue Paste with good results, BUT, NO cold blue, repeat, NO cold blue, is really durable. If you boil the parts and swab and card, you can create an imitation rust blue that is fairly durable, but that is as much work and trouble as using a real rust blue, so nothing is saved by using cold blue.
Jim |
January 30, 2013, 11:15 PM | #13 |
Senior Member
Join Date: April 7, 2006
Posts: 10,966
|
Just buy rust bluing solution from Brownells, and do it properly.
Cold blue sucks. |
January 30, 2013, 11:40 PM | #14 |
Senior Member
Join Date: February 17, 2006
Location: Northeast of Houston, Tx
Posts: 393
|
I prefer either Novum Solutions "Blue Wonder" (have a black version too) or Brownell's Oxpho Blue (cream version works better than liquid version for me) to cold blue a firearm. I've had good and bad results with both products, but they have worked better overall than other cold blue products I've tried. Both products wear quite well and the Oxpho is easier to use and less costly than the Blue Wonder. If I'm redoing an old rifle not worth much, I'll use the Oxpho. Use the Blue Wonder on firearm I really am concerned about turning out nice.
A lot depends on the metal you are working with. Basically a barrel takes cold blue better than a receiver because a barrel is softer. Have a barrel on an old BSA rifle from the late 60s ready to be cold blued and expect it to turn out nice. Will not try to do the receiver on the rifle as it is in better condition than the barrel and as I mentioned already, its hit and miss on a receiver due to its metallurgy. |
January 31, 2013, 01:59 AM | #15 |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,929
|
If you're determined to use cold blue, Oxpho is the best I've tried, for ease of application, final appearance and durability.
__________________
Do you know about the TEXAS State Rifle Association?
|
January 31, 2013, 09:05 AM | #16 |
Junior member
Join Date: January 21, 2013
Location: NY
Posts: 150
|
Don't Do It! Looks terrible!
|
February 1, 2013, 12:44 PM | #17 |
Member
Join Date: October 16, 2012
Location: Oxford, Mississippi
Posts: 33
|
This is what I ended up with. I used Plum Brown and then boiled in distilled water. I gave it 5 coats. I'm quite happy with the results, it came out better than I'd hoped. The picture dosnt do it justice. It has a very even dark blue/ black finish. Thank you everyone for all the advise.
|
February 1, 2013, 02:42 PM | #18 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Since you are doing a percussion revolver an easy and durable finish can be obtained with rust bluing and is the way many of the originals were finished.
Order some Art's Belgian blue from Midway. All you will need then is some distilled water and a pan large enough to hold the cylinder and barrel. Polish no finer than 320 grit and have some OOOO degreased steel wool. You can do it on the stove top as all you are doing is boiling water. With just a little care you can end up with a great blue job every bit as durable if not more so that hot caustic blue. Midway has a you tube video on this. Check it out. |
February 2, 2013, 12:25 AM | #19 |
Member
Join Date: November 11, 2009
Location: In a swamp in Georgia
Posts: 18
|
Finally Found Something I can Do!
My first experience was about ten years ago. Bought the kit. Read the directions. Blued the rifle.
Pretty simple. I was lucky to have a friend with a blast cabinet. He blasted it clean with walnut shells. It had no pitting just the wear from years of use. That may be the key. Get it clean, get it right then the blueing is really simple. I used two coats. Waited about three weeks and oiled it up good. Got a nice finish too. Its still in the same condition as it was the day I blued it. Who Knew?
__________________
"IF YOU CAN READ THIS YOU ARE IN RANGE" |
February 3, 2013, 09:20 AM | #20 | |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,824
|
Quote:
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
|
February 3, 2013, 12:22 PM | #21 |
Senior Member
Join Date: July 15, 2006
Location: Fern Creek ,KY and Metro Louisville at large
Posts: 430
|
Oxpho blue is the cold blueing my shop
Have a bottle of B-C blue on shelf as well as .44-40 To cold blue whole guns I use Flex-Bar Tool Black.
__________________
Republic Arms and Armaments 07 1-502-231-1118 Machine Shop and Finishing Services to the trade and public |
February 5, 2013, 12:55 PM | #22 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,486
|
Do tell.
Where can I learn about Flex Bar Tool Black? Neither Google nor Bing want to play. |
February 5, 2013, 02:25 PM | #23 |
Senior Member
Join Date: July 15, 2006
Location: Fern Creek ,KY and Metro Louisville at large
Posts: 430
|
Do tell.
Where can I learn about Flex Bar Tool Black? Neither Google nor Bing want to play. * Flexbar Machine Tool Corp
__________________
Republic Arms and Armaments 07 1-502-231-1118 Machine Shop and Finishing Services to the trade and public |
March 11, 2013, 11:02 AM | #24 |
Senior Member
Join Date: July 15, 2006
Location: Fern Creek ,KY and Metro Louisville at large
Posts: 430
|
Seems to be out of production
But Birchwood-Casey makes a similiar product.
__________________
Republic Arms and Armaments 07 1-502-231-1118 Machine Shop and Finishing Services to the trade and public |
March 11, 2013, 07:45 PM | #25 |
Senior Member
Join Date: January 9, 2013
Posts: 278
|
For a home job without a lot of expensive equipment the rust blue aka Belgian Blue is the best way to go. Follow the instructions closely and do it on a couple or more pieces of scrap metal till you get the hang of it. I'll bet you'll know when you're ready to do your first gun.
|
Thread Tools | Search this Thread |
|
|