February 5, 2010, 06:38 PM | #1 |
Member
Join Date: January 12, 2010
Location: "A Facist Subject" California
Posts: 64
|
Rifle Bore cleaning ?
Well boys & maybe girls,
May I please ask for another person's opinion / critique on my cleaning method, I'll try not to be long winded about it: 1-Run a wet patch w/Shooters Choice on a jag through bore, same direction as bullet travels always, drop patch at the muzzle, then repeat. Let set a minute or so. 2-Run a dry patch through, turn patch over, repeat. (If in the field do this every 30-40 rounds) continue shooting varmints / PD's. 3-After 60-80 rds. Repeat steps 1 & 2 4-Run wet patch w/Barnes CR-10 or Sweets I sometimes alternate. Run wet nylon brush, back & forth through bore. Let it set 5-10 Min., no longer. 5- Run dry patch through, same as step #2. 6- Run wet patch w/rubbing alcohol through, turn over, repeat. 7- Run dry patch through, turn over, repeat. 8- Run wet patch w/Kroil through, turn over, repeat. 9- Run dry patch, turn over, done. "O'B" |
February 5, 2010, 06:43 PM | #2 |
Senior Member
Join Date: November 7, 2008
Location: Shelby, MT
Posts: 1,013
|
If it gets your bore as clean as you like it, it must be OK. Only you can judge that.
|
Thread Tools | Search this Thread |
|
|