March 27, 2002, 08:11 AM | #1 |
Member
Join Date: August 22, 2001
Location: Springfield, Ohio
Posts: 49
|
50 AE reload data ?
Does anyone have any data for loading down the 50 AE ?
I just got back my Blackhawk conversion and can't find any data for something around 800 fps. I don't want to have to use the nuke loads all the time ! I had a back issue of American Handgunner that Taffin had some data in, but of course I can't find it now.
__________________
Gunslinger Cogno, ergo, boom |
March 27, 2002, 11:13 AM | #2 |
Senior Member
Join Date: August 13, 2001
Location: Montana
Posts: 489
|
__________________
http://stevespages.com/page8.htm |
March 27, 2002, 02:36 PM | #3 |
Staff
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 16,947
|
Speer #13 has some good reloading data specifically for revolvers. With the exception of W296 and H110, I don't see why you can't download some of the minimums til you get what you want. Sort of like the opposite of working up a load.
|
April 15, 2002, 03:36 PM | #4 |
Member
Join Date: December 1, 2000
Location: pahrump,nevada
Posts: 65
|
Hey Gunslinger . Who did the conversion for you ?
|
April 15, 2002, 10:55 PM | #5 |
Member
Join Date: August 22, 2001
Location: Springfield, Ohio
Posts: 49
|
pahrumpcaveman (interesting handle),
The conversion was done by Gary Reeder - I can't say enough good things about him !! Quoted 6 months - got it in 5 !!!!!!!!! and on budget !!!! 5 shot cylinder, .50 bbl, Belt Mtn. base pin, steel grip frame, nice trigger pull, nice blue job, and VERY cool - cylinder turns either way with the loading gate open. Tried 8 & 10 gr 231 behind a cast 385 gr LBT - good load, like a warm .45 Colt. Also loaded up some speer 325 gr HP with 30 gr 296 - WOW !!! Lots of recoil, BIG ball of fire out the muzzle......Thats the "wuffo" load........"wuffo you got a 50 cal Blackhawk?".............Answer - "Cause nobody makes a .60 !!" (yet).
__________________
Gunslinger Cogno, ergo, boom |
April 15, 2002, 11:26 PM | #6 |
Member
Join Date: December 1, 2000
Location: pahrump,nevada
Posts: 65
|
Ya I got a 454 casull that I loaded up with 32 gr 296 under a 300 gr Speer bullet . Velocity is a little over 1500 fps ( according to speer manual ) and It has a VERY abusive recoil . That 50 AE is right in the same ball park with a much lower cup pressure . I wonder if the recoil is much lighter due to this lower pressure ? How much was the conversion ? A 50 AE might be fun to have also . ( Pahrump is the town I live in and caveman is and old CB handle .)
|
April 18, 2002, 06:55 AM | #7 |
Member
Join Date: August 22, 2001
Location: Springfield, Ohio
Posts: 49
|
I thought about a 454, but thought punching half inch holes in things would be cool.
Thought about it even more when I found out Bowen and Leinbaubh charged ~$1500 for a conversion. Finally hooled up with Gary Reeder who did it for $800. I about [color=#FF0000]█[/color][color=#FF0000]█[/color][color=#FF0000]█[/color][color=#FF0000]█[/color][color=#FF0000]█[/color] when he called a month early to say it was done. Now that I have it, I see why he is being written up so much lately in the mags !!! The hot loads recoil is right up there with my 45-70 Contender. Going back to the range today with the chrono.
__________________
Gunslinger Cogno, ergo, boom |
Thread Tools | Search this Thread |
|
|