November 1, 2012, 02:39 PM | #1 |
Junior member
Join Date: October 4, 2004
Posts: 458
|
Pump or auto?
I've always used a Mossberg 500 pump and it is easy to take off the barrel for cleaning. I am thinking about changing to a semi-auto and was looking at a few gun books and the disassembly seems a little more complicated. Any thoughts on this? Are there some semi-autos that disassemble easier than others?
|
November 1, 2012, 03:41 PM | #2 |
Senior Member
Join Date: January 7, 2010
Location: Houston, TX
Posts: 802
|
No I do not find take down of a semi any different than a pump. If you can do one, you won't have problems with the other.
If you have problems you can always look on YouTube, somebody there I'm sure has a video on the gun your considering. I've only owned two shotguns in my life. My first one was a Winchester 1100, a practical HD pump. Had it for about 20 years. About 3 years ago I upgraded to a semi Mossberg 930SPX. I am very pleased with mine. And it was definately an upgrade well worth the money.
__________________
"Socialized Medicine is the Keystone to the Arch of the Socialist State.” -Vladimir Lenin "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them." - Thomas Jefferson (An early warning to Obama care) Last edited by Eppie; November 2, 2012 at 08:13 AM. |
November 1, 2012, 05:02 PM | #3 |
Senior Member
Join Date: September 19, 2012
Location: Somewhere out there
Posts: 184
|
Their no different really( its like switching from a mountain bike to a BMX bike...as long as you know how to ride you'll be fine) BTW semi-autos are pretty fun.
__________________
12 Gauge Fury! |
November 1, 2012, 06:31 PM | #4 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
There are 2 kinds of semi-autos ....the Inertia guns ( Benelli and others ) ...and gas operated ( Beretta, etc )....
------------------- The Inertia guns shoot a lot cleaner - and in general are easier to take care of. But today's gas operated guns are pretty good as well. ------------------ Cleaning procedures on all pumps and semi-autos are about the same ...take off the barrel -- remove the bolt assembly -- and remove the trigger group...clean, lube and reassemble everything .... To do that on most pumps or gas guns will probably take 20 - 30 min... On a Benelli - its a little faster - maybe 10 - 15 min... After you do it a few dozen times -you get quicker... |
November 1, 2012, 06:47 PM | #5 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,792
|
Actually there is a big difference if you are doing more than taking the barrel off with most guns. Lots more parts in the more complex semi's. Beretta's in particular are a bit more complex.
The Benelli's are about as simple as it gets in a semi and why I prefer them. Simple like a pump, but it does the work for me. |
November 1, 2012, 07:36 PM | #6 |
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
|
My auto loader only has five extra parts over it's same "brand" pump action cousin. Piston, piston spring, op rod, retainer pin, cocking handle. To remove just the barrel for cleaning, you only need to take off the magazine cap like most pump guns. The piston and springs are easily removed for cleaning if need be also.
|
November 1, 2012, 08:30 PM | #7 |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
I'm happy to jump on the Benelli Inertia bandwagon, as those have been the only type of shotgun I've bought in the past 25 years... my first being a wood stocked, H&K/Benelli SL-80 mod 121.
Saying that, the inertia Benellis are not for everyone. Price is the primary detractor... with good condition used guns selling for $850 and up. If you're on a budget and you want a new semi-automatic that has a bit of proven (arguable) reliability... the CZ 712 Utility and Mossberg 930 are your only real options. I've had some experience with the CZ and prefer it over the Mossberg, but there's very little in the way of accessories readily available for the 712 at this time other than an adjustable stock and extended mag tube. I'd still buy the CZ... just to be obstinate ol' cuss. C
__________________
Shoulder Drive Nicholson Club |
November 1, 2012, 08:44 PM | #8 |
Senior Member
Join Date: March 22, 2009
Location: S.E.PA.
Posts: 920
|
I hate cleaning my Beretta 391, and I wouldn't trade it for any other. No matter which one you buy, after you take it apart a couple times, you'll wonder why you worried about it.
I would shy away from the ole Browning auto-5, that's a whole different animal. Don't get me wrong, they are wonderful shotguns, just different.
__________________
NRA member, DCF&S member, PAFOA member, USPSA member, NSCA member R.I.P.____Murphy |
November 1, 2012, 11:56 PM | #9 |
Junior member
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
|
Gas guns cycle faster. 930 is a good deal for the $$$.
|
November 2, 2012, 08:22 AM | #10 |
Senior Member
Join Date: January 7, 2010
Location: Houston, TX
Posts: 802
|
jmortimer
You are obsulutely correct. I think you can pay more, but you won't get a better gun. I am Italian (Eppie is my Bronx nickname for Giuseppe)still have uncles/aunts/cousins there, so I have nothing against the Benelli and Berettas. But I can't rationalize paying 3 times what the SPX costs.
__________________
"Socialized Medicine is the Keystone to the Arch of the Socialist State.” -Vladimir Lenin "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them." - Thomas Jefferson (An early warning to Obama care) |
November 2, 2012, 10:09 AM | #11 |
Junior member
Join Date: October 4, 2004
Posts: 458
|
Eppie and jmortimer- hope you two are still there, as I said- I already have a Mossberg 500 and I have bought turkey choke tubes, skeet choke tubes, etc so there would be a valid reason to go with a Mossberg 930. How do you like the gun? For a lot of game I'd use standard 2 3/4" dove/quail loads but in the spring maybe a 3" turkey load. How well do it handle different loads?
|
November 2, 2012, 10:13 AM | #12 |
Junior member
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
|
I don't hunt, only use use cylinder bore.
|
November 2, 2012, 01:30 PM | #13 |
Senior Member
Join Date: January 7, 2010
Location: Houston, TX
Posts: 802
|
davem,
If you already have a Persuader, and don't have loose cash I would stick with it. The only reason I upgraded is because I have the money and the banks don't pay interest (hardly) any more. If you're looking for a new toy, I highly recommend it. I've used everything from buckshot to #12 and only once had a jam. I believe it was because I didn't clean the gas tube. I just squirted a little Remoil in there and didn't have any more problems. When I got home I gave it a real good cleaning and haven't had any more issues. I shoot skeet without choke tubes. And I'm not a hunter because I'm too cheap to pay for a lease. So I pretty much stick to the range. For a long time I didn't let people know I was into guns, but now that I do, a friend invited me to kill some pigs at his ranch in January.
__________________
"Socialized Medicine is the Keystone to the Arch of the Socialist State.” -Vladimir Lenin "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them." - Thomas Jefferson (An early warning to Obama care) Last edited by Eppie; November 2, 2012 at 01:37 PM. |
November 3, 2012, 12:00 PM | #14 |
Senior Member
Join Date: May 19, 2012
Location: Western, Ny
Posts: 190
|
Davern
I also own and love my mossberg 930. I own a composite version with both 26 in ported bird barrel and a 24 in fully rifled barrel with rifle sights. This firearm has served me flawlessly for the last 2 1/2 - 3 years and I have def not been easy on it. I use it to hunt everything from pigeon,squirrel, and rabbits to deer and black bear. I dont think anyone could go wrong in purchasing this firearm.
__________________
"Si vis pacem, para bellum". If you want peace, Prepare for war!!!! |
November 3, 2012, 04:42 PM | #15 |
Senior Member
Join Date: November 17, 2004
Location: NH, USA
Posts: 812
|
>>Gas guns cycle faster<<
Then I suspect you've never had a Benelli.
__________________
Liberals don't care what you do... as long as it's mandated. |
November 3, 2012, 07:32 PM | #16 |
Senior Member
Join Date: February 21, 2010
Location: Rome, NY
Posts: 941
|
I have not fired a Bennelli. However I have fired many other semi auto shotguns. I maintain I can shoot faster accurately with my Model 12 pump. I can shoot a pinch faster with a semi, but not as accurately.
__________________
Jim Page Cogito, ergo armatum sum |
November 3, 2012, 08:57 PM | #17 |
Junior member
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
|
">>Gas guns cycle faster<<
Then I suspect you've never had a Benelli." It is a fact beyond dispute that gas operated Winchester SX2/SX3/FN SLP and probably the Browning Maxus for that matter, are the fastest cycling, aka shooting, shotguns. Sorry, but you have never, apparently, had a SX shotgun so you would not know the facts. Now you do. |
November 3, 2012, 08:57 PM | #18 |
Senior Member
Join Date: December 18, 2005
Posts: 241
|
Take-down for a semi will not be much different than a pump.
__________________
"America is a free country, and Michael Moore is free to make an @zzhole of himself". David Horowitz in "Michael Moore Hates America". |
November 9, 2012, 11:19 PM | #19 |
Senior Member
Join Date: June 18, 2008
Location: Pac.N.W.
Posts: 1,804
|
I picked up a Benelli 121 today for $299, can't wait to get it out, all I hear is good things.
__________________
Be Smarter Than A Bore-Snake! |
Thread Tools | Search this Thread |
|
|