Aimpoint Microdot HELP!!

Ulfberht · February 8, 2015, 08:44 AM

I recently bought an Aimpoint H1 Microdot, which came with the standard 39mm riser and LRP QD Mount Base. I unscrewed the four bolts which pass through the 39mm riser from the mount into the optic. The mount has come away from the riser, but the optic will not separate from the riser.

What is holding the riser to the optic body? Glue?

Ridge_Runner_5 · February 9, 2015, 02:10 PM

It's probably just being held together by some left over threadlocker. Give it a twist and it should come loose, as long as you've got all 4 of those screws removed.

Ulfberht · February 9, 2015, 04:06 PM

Okay...I hope that's all it is. I will give it a twist. Thanks!

February 8, 2015, 08:44 AM	#1
Ulfberht Junior Member Join Date: January 17, 2015 Location: Valhöll Posts: 5	Aimpoint Microdot HELP!! I recently bought an Aimpoint H1 Microdot, which came with the standard 39mm riser and LRP QD Mount Base. I unscrewed the four bolts which pass through the 39mm riser from the mount into the optic. The mount has come away from the riser, but the optic will not separate from the riser. What is holding the riser to the optic body? Glue?

February 9, 2015, 02:10 PM	#2
Ridge_Runner_5 Senior Member Join Date: February 8, 2008 Location: Denver, CO Posts: 1,925	It's probably just being held together by some left over threadlocker. Give it a twist and it should come loose, as long as you've got all 4 of those screws removed.

February 9, 2015, 04:06 PM	#3
Ulfberht Junior Member Join Date: January 17, 2015 Location: Valhöll Posts: 5	Okay...I hope that's all it is. I will give it a twist. Thanks!