Volquartsen Target Sear

Polter · January 17, 2006, 06:26 PM

I'm thinking about getting a Volquartsen Target Sear on Ebay for my Ruger 77/22 (LR). Only problem - it doesn't come with the spring. Is the spring absolutely necessary?

One other question - how hard is the installation? Could a reasonably intelligent 16 year old do it?

Thanks!

Polter

cntryboy1289 · January 18, 2006, 12:18 AM

Use your original spring for it. You should be alright if you use a slave pin to put the disconnector and trigger back to gether.

Polter · January 18, 2006, 02:03 AM

One more questions - is there anywhere I can get installation instructions?

Foxman · January 18, 2006, 04:08 AM

Just buy the target trigger kit, it comes with the spring and the polished guide pin and all the instructions. You need em all to make a real difference and yes anyone with a bit of sense and patience can do it fine.

cntryboy1289 · January 18, 2006, 05:23 AM

I didn't notice you have the Model 77/22. I would still use the original spring myself and sand it down if you need to. Most of the time the VQ springs are a bit too light for my tastes. I am not sure about the instruction sheet, but I would think one would come with the sear. If not, you might try going to this site and ask someone there about the 77/22:

http://www.rimfirecentral.com/forums/index.php?

January 17, 2006, 06:26 PM	#1
Polter Junior Member Join Date: January 17, 2006 Posts: 8	Volquartsen Target Sear I'm thinking about getting a Volquartsen Target Sear on Ebay for my Ruger 77/22 (LR). Only problem - it doesn't come with the spring. Is the spring absolutely necessary? One other question - how hard is the installation? Could a reasonably intelligent 16 year old do it? Thanks! Polter

January 18, 2006, 12:18 AM	#2
cntryboy1289 Senior Member Join Date: July 19, 2004 Location: Ms Posts: 1,160	Not a problem Use your original spring for it. You should be alright if you use a slave pin to put the disconnector and trigger back to gether.

January 18, 2006, 02:03 AM	#3
Polter Junior Member Join Date: January 17, 2006 Posts: 8	One more questions - is there anywhere I can get installation instructions? __________________ "Before you judge someone, walk a mile in their shoes. After that, who cares? He's a mile away and you've got his shoes!" John 6:47

January 18, 2006, 04:08 AM	#4
Foxman Senior Member Join Date: August 13, 2005 Posts: 466	Just buy the target trigger kit, it comes with the spring and the polished guide pin and all the instructions. You need em all to make a real difference and yes anyone with a bit of sense and patience can do it fine. __________________ Better the man suspected of being a fool keep his mouth shut, than to open it and remove all doubt.

January 18, 2006, 05:23 AM	#5
cntryboy1289 Senior Member Join Date: July 19, 2004 Location: Ms Posts: 1,160	Sorry about that I didn't notice you have the Model 77/22. I would still use the original spring myself and sand it down if you need to. Most of the time the VQ springs are a bit too light for my tastes. I am not sure about the instruction sheet, but I would think one would come with the sear. If not, you might try going to this site and ask someone there about the 77/22: http://www.rimfirecentral.com/forums/index.php?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search