November 4, 2012, 12:41 AM | #1 |
Senior Member
Join Date: November 5, 2008
Location: Spokane, WA
Posts: 1,347
|
Sig P226 Slide Pins
So all,
Thinking of getting my P226 cerakoted by a local custom shop that gets great reviews. However, their shop fees for armoring are a little steep though. Was hoping I could armor the gun myself. I'm not an expert, but have some experience working on my own guns. My question is, my reference book says to push out the slide pins, THEN DISCARD, not re-use the pins. Is this actually the case that I can't re-use the pins??? I don't think there is anywhere around here that would have replacements even. No Sig armorers that I know of. Thanks all!
__________________
ΜΟΛΩΝ ΛΑΒΕ VIGILIA PRETIUM LIBERTATIS "The price of liberty is vigilance" America is at an awkward stage. It's too late to work within the system, but too early to shoot the bastards. |
November 4, 2012, 10:30 PM | #2 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
They are roll pins and the usual practice is not to re-use roll pins since the "spring has sprung" and they have lost the tension that holds them in. They are usually so cheap that gunsmiths who work regularly with guns having roll pins will have a bunch of them, and they can be ordered from Brownells or, for a specific gun, from parts places like Gun Parts Corp.
Also, always use a proper roll pin punch; a standard flat end punch can mess up the roll pin and wedge it in place, damaging the gun. Jim |
November 5, 2012, 12:04 AM | #3 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
|
Maybe not roll pins. In the past several years, Sig has gone to and from three different types of pins on P series pistols. 1. The typical roll pin within a roll pin. 2. The rolled pin. Which is like a rolled up croisant (sp- funny fench biscuit thing), and looks like a typical roll-pin when viewed from the end while in place. 3. And the splined pin. A regular pin with an enlarged and splined portion on one end.
Sig does not recommend the re-use of any of their pins. My thoughts on that? I don't know, the jury is still out I guess. During the Armorers course, we worked on "factory armorers class designated" firearms with obviously wallowed out holes and abused pins. Would I re-use pins? No- and all because they put that "Liability and Vicarious Liability" bug in my head. Would I re-use one in an emergency situation on MY OWN firearm? I still don't know- it would have to be a pretty serious emergency.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
Thread Tools | Search this Thread |
|
|