July 23, 2002, 04:31 PM | #1 |
Member
Join Date: March 17, 2001
Location: Central California
Posts: 28
|
Firing Pin
When I shoot Winchester 124gr 9x23 (white box) USA ammo in my SA 1911A1, the primer does not dent but scrapes a little primer material off, but still fires the cartridge. It does the same thing when I shoot 9mm Luger (S&B) ammo.
Is there something wrong with my firing pin, spring or both??? They are stock from Springfield. |
July 23, 2002, 05:50 PM | #2 |
Senior Member
Join Date: October 29, 1999
Location: Dewey, AZ
Posts: 12,858
|
9X23 and 9X19 (Luger) in the same gun ??
Sam |
July 23, 2002, 08:01 PM | #3 |
Senior Member
Join Date: February 15, 1999
Location: Winston-Salem, NC USA
Posts: 6,348
|
Do you have interchangeable barrels? Do the 9x23s work in the same mags?
|
July 24, 2002, 11:24 AM | #4 |
Member
Join Date: March 17, 2001
Location: Central California
Posts: 28
|
Well of course I have two (2) barrels guys. I use 38 super mags for both 9mm and 9x23, works great.
|
July 29, 2002, 01:12 AM | #5 |
Senior Member
Join Date: October 4, 2001
Location: Idaho
Posts: 105
|
Sounds like the FP is dragging on the primer. Check to see that the FP and FP hole does not have burrs on it, that the FP does not hand up. I would also replace the FP spring with one from Wolfe springs.
__________________
www.savagegunsmithing.com Fight Crime-Shoot Back!!!! Anyone worth shooting is worth shooting more than once!!! |
|
|