March 6, 2012, 09:16 PM | #26 |
Junior Member
Join Date: March 19, 2011
Posts: 1
|
Thinning Ballistoil
Oly, have you found anything better than water yet? Like you, I'm hesitant cleaning metal with water and just started trying this product. If it cleans my BP with water and no rusting I would be happy, surprised, but happy.
|
March 6, 2012, 09:19 PM | #27 |
Senior Member
Join Date: March 4, 2012
Posts: 136
|
Where can i buy ballistol.
|
March 6, 2012, 09:36 PM | #28 |
Senior Member
Join Date: May 12, 2011
Location: New Mexico
Posts: 1,315
|
Ballistol
I bought mine from the LGS. Nothing like it for muzzle loaders. It cleans those nasty little chambers cut into the GPR breech plug factory fresh. It greatly
reduces the number of patches to dry the bore. I never see flash rust with Ballistol. I use it cause it drys nice and flat, none of the Hershey bar look. Just don't use it for dessert topping. |
March 7, 2012, 01:22 AM | #29 | |
Senior Member
Join Date: October 8, 2011
Posts: 162
|
Quote:
|
|
March 7, 2012, 11:10 PM | #30 |
Junior member
Join Date: January 26, 2012
Posts: 1,066
|
Midway sells it... buy the liquid, not the spray.
Cleaning metal with water is easy... use it hot, let the metal heat up, and it'll dry in a minute once you wipe it down. Oil and forget about it. I use Ballistol with great success. Water is the way you dilute it... <sorry to the OP, but it's true> Willie . |
March 9, 2012, 01:47 PM | #31 |
Member
Join Date: July 31, 2010
Location: Northwest
Posts: 43
|
Kind of Thick
I use distilled water with Ballistol also and agree it makes a thick concoction. But it works so well on my BP firearms it is worth the effort to wipe clean before firing after storing. Just checked my BP rifles and revolver that were fired last fall and cleaned with recommended distilled water and Ballisltol then stored under the bed last fall in one case and in rifle cases and a silicone sock in another area. None of the pieces showed any rust this month or during periodic checks during the winter.
|
March 9, 2012, 10:41 PM | #32 |
Senior Member
Join Date: May 14, 2009
Location: Macon Co. NC
Posts: 591
|
I don't understand why someone hasn't come up with a homemade concoction equivalent that is much cheaper. Nearly every other cleaner on the market has it's counterpart homemade recipe.
So...what is "white pharmaceutical oil" exactly? Mineral oil??? I'm asking as I have no earthly idea. What kind of alcohols??? I'm all for trying to mix up a batch.
__________________
Barney Fife: "Nip it, nip it, nip it!" Andy Griffith:"Oh now Barn'...." |
March 9, 2012, 11:25 PM | #33 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Yes, basically pharmaceutical white oil is food grade mineral oil; food grade implies purity standards that ensure no toxic contaminants are included. And it's relatively expensive stuff for that reason.
However, you don't need food grade mineral oil. Machinist's cutting oil, used to cool metal cutting tools, will work just as well. |
March 10, 2012, 03:41 AM | #34 | |
Senior Member
Join Date: February 24, 2009
Location: Arizona
Posts: 877
|
Quote:
At any rate, it thinned my Ballistol down very nicely, so I now have three spray bottles of the stuff on the bench. One is a water mixture ("moose milk" or whatever you guys call it) that I use whenever it's appropriate, another is straight Ballistol that I use mostly for lubrication and rust prevention, and the third is my thinned down mixture that I use for gun cleaning and flushing parts off etc., or when I don't want water getting into wood or involved in what I'm doing. What I had hoped to find was a non-toxic alcohol or some chemical of that sort in order to keep the relatively non-toxic nature of Ballistol intact, and while that's probably easy for someone somewhere to do I got zero help here regarding it, no good suggestions elsewhere, so I just decided to give up on the non-toxic part and go with the mineral spirits route once I found one that was virtually odorless. Oh and thanks again to Dr. Unhelpful for deciding for me what's "pointless" while engaged in being a jerk just for grins. After all, if you're gonna be useless, you might as well be an a-hole at it. Cheers, Oly Last edited by olyinaz; March 10, 2012 at 03:55 AM. |
|
March 16, 2012, 09:32 AM | #35 |
Junior Member
Join Date: December 31, 2010
Location: Peace Valley, MO
Posts: 13
|
I found a place in Oklahoma to get ballistol at a good price and with the 16 oz. can, you also get a sprayer with it at no cost. I only use the non aerosol version. The only draw back is that they will not accept a debit/credit card orders unless the order is over a certain amount. They ship first class mail so the expense is low. Cost of a 16 oz. can is only $10 with a sray nozzle. The owners are cowboy action shooters also and pleasant to deal with. Contact by e mail @ www.cowboyshooterssupply.com & take a look at their other products or call ph# (580) 873-2663. Best price I have found.
|
March 16, 2012, 10:09 PM | #36 | |
Senior Member
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 2,603
|
Quote:
The more carbon atoms in the molecule, the less water soluble and the more oily the alcohol tends to be, cholesterol, for example is a fat soluble alcohol. |
|
|
|